KOCH SBD-B BORING MACH. (FEED THRU DBL END TRIM, BORE & DOWEL): -- Specifications:0.6" - 1.18" (15 - 30 mm) Material thickness; 0.9" - 9.8" (23 - 250 mm) width; & 4.7" - 98.4" (120 - 2,500 mm) length cap.; -- Working pass height 36.2" (920 mm); Capacity of approx 25 Work Cycles/Min. -- Features:Motorized opening with digital setting. Automatic hopper feed with hydraulic stock feed beam and automatic return conveyor to operator. -- Each side equipped with: Trim saw units, Boring units with horizontal and vertical drilling, & Dowel insertion. -- Linear path control for stock transport with low profile machine bed and linear guides. Fixed stock stops. -- Adjustable working stations with Manual & motorized adjustments. -- Horizontal Drilling:Each side with (1) 2.7 HP (2 kW) - 3,400 RPM Boring unit. -- Each horizontal boring unit has a (6) Spindle Type D-1277 drilling chucks on 32 mm centers. -- Drilling Chucks hold 10 mm dia shank & 70 mm max bit length. -- Each head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Top Vertical Drilling:(4) Top Vertical Boring Units with rotating device. Each unit 2.7 HP (2 kW) - variable speed from 3,000 - 6,000 RPM. -- Each Drilling chuck with mechanical digital read out for manual finite adjustment with, KOCH's "QC" (quick change) system & rotating device. -- Drilling Chucks hold 10 mm dia drill bit shank & 70 mm max bit length. -- Each head moves on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Each vertical unit can be equipped with "QC" Boring blocks (swivel 360°) with pneumatic locking. -- All Vertical units are equipped with pneumatic locking & individual adjustment of the boring block. -- Distance position readouts on all heads for finite "X"/"Y" adjustments; and "Z" axis boring depth control. -- Doweling:With (4) total dowel Inserters, (2) inserter on each side, with vibrating dowel bowl feeders. -- Includes automatic dowel measurement, pressurized glue tank, & back-wash rinsing tank. -- NOTE:This machine is currently setup for 0.437" dia. x 1.75" long dowels (11 mm dia. x 44.45 mm long dowels). Other sizes & additional dowel injectors can be purchased from Koch, at additional cost. -- Operator & Machine Control:Beckoff SPS PLC for machine function & error diagnosis. -- Operating Features:Electrical digital setting with all drill stations arranged with readouts for "X"/"Y"/"Z" axis positioning. -- The stationary machine side is on the LH side (seen in transport direction) and not adjustable. -- The RH is adjustable via motorized movement along the "X" axis. -- The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min. -- Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer

KOCH SBD-8 BORING MACH. (FEED THRU DBL END TRIM, BORE & DOWEL): -- Specifications:0.6" - 1.18" (15 - 30 mm) Material thickness; 0.9" - 9.8" (23 - 250 mm) width; & 10" - 98.4" (254 - 2,500 mm) length cap.; -- Working pass height 36.2" (920 mm); Capacity of approx 25 Work Cycles/Min. -- Features:Motorized opening with digital setting. Automatic hopper feed with hydraulic stock feed beam and automatic return conveyor to operator. -- Each side equipped with: Trim saw units, Boring units with horizontal and vertical drilling, & Dowel insertion. -- Linear path control for stock transport with low profile machine bed and linear guides. Fixed stock stops. -- Adjustable working stations with Manual & motorized adjustments. -- Horizontal Drilling:Each side with (1) 2.7 HP (2 kW) - 3,400 RPM Boring unit. -- Each horizontal boring unit has a (3) Spindle Type D-1277 drilling chucks on 32 mm centers. -- Drilling Chucks hold 10 mm dia shank & 70 mm max bit length. -- Each head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Top Vertical Drilling:(2) Top Vertical Boring Units with rotating device. Each unit 2.7 HP (2 kW) - variable speed from 3,000 - 6,000 RPM. -- Each Drilling chuck with mechanical digital read out for manual finite adjustment. -- Drilling Chucks hold 10 mm dia drill bit shank & 70 mm max bit length. -- Each head moves on guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Each vertical unit can be equipped with Boring blocks (swivel 0° - 90°) with pneumatic locking. -- All Vertical units are equipped with pneumatic locking & individual adjustment of the boring block. -- Distance position readouts on all heads for finite "X"/"Y" adjustments; and "Z" axis boring depth control. -- Doweling:With (2) total dowel Inserters, (2) inserter on each side, with vibrating dowel bowl feeders. -- Includes automatic dowel measurement, pressurized glue tank, & back-wash rinsing tank. -- NOTE:This machine is currently setup for 0.437" dia. x 1.75" long dowels (11 mm dia. x 44.45 mm long dowels). Other sizes & additional dowel injectors can be purchased from Koch, at additional cost. -- Operating Features:Mechanical digital readout setting for all drill stations for "X"/"Y"/"Z" axis positioning. -- The stationary machine side is on the LH side (seen in transport direction) and not adjustable. -- The RH is adjustable via motorized movement along the "X" axis. -- The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min. -- Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer belts with lateral stock alignment. -- Work pieces are automatically feed and positioned to pneumatic stops then clamped prior to trim, drilling or insertion. -- Compl

KOMATSU D61PX-24 Crawler DozerProven, second generation D61PX-24 comes standard with a parallel link undercarriage system for long undercarriage life. In addition to E and P modes, a new H mode helps operators maintain ground speed while operating under heavy loads. Specifications: -- Engine: Komatsu SAA6D107E-3 Gross 127 kW 170 HP 2200 RPM -- Travel Speed: - 1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph - 2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph - 3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph -- Number of track rollers (each side): 8 -- Fuel tank: 372 ltr 98.3 U.S. gal -- Weight: 18320 kg 40,389 lbs -- Hours:5200,Equipped with: -- Cab integrated ROPS (ISO 3471) High rigidity and superb sealing -- Hydrostatic Transmission (HST) control system -- PAT Dozer with Adjustable Pitch -- Comfortable Ride with Heated Operator Seat -- Cab Damper Mounting -- Parallel Link Undercarriage System (PLUS) -- Self-adjusting idler support -- Palm Command Control System (PCCS) Levers -- One-Pedal Design (Decelerator/Brake Pedal) Controls Speed, During Operation -- Selectable Working Mode -- Heavy-Duty High-Pressure Common Rail (HPCR) Fuel Injection System -- Komatsu’s New Emission Regulations-Compliant EngineNew parts: Brand new radiator Brand new chains, upper and lower rollers, and new pads. We can provide financing and also assist in the delivery to your location.

KOMATSU - D61PXi-24: Crawler DozerSpecifications -- Engine: 126 kW (169 HP) @ 2,200 rpm (turbocharged). -- Max. travel speed: 5.59 MPH. -- Blade type: Straight. -- Hours: 6,525.Equipped with: -- Joystick operator controls. -- IMC / GPS Machine. -- A/C & Heated enclosed cab. -- 6-Way blade. -- U-C is 65% remaining. -- Grade control. -- Oscillation. -- Drawbar. -- Air ride seat.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i63 The Flex Series of CNC routers from Komo Machine has been developed specifically for the customer who expects the utmost in technical quality and reliability at an economical price. These machines feature a moving gantry configuration and a side-mounted tool changer. Features: Four-pole, 16HP (12kw), 24,000 RPM, HSK 63F, fan-cooled spindle, 12 position automatic tool changer with aggregate capability, Air blast for optimal dust/chip evacuation and cooling of the cutting tool, Advanced Fanuc HVI servo system tuned for optimum acceleration and deceleration, Fanuc Panel i control with integrated PC 19" color display Construction, FEA "Finite Element Analysis" engineered structure, Heavy-duty steel fabrication Specifications Spindle: 1 Spindle RPM 16HP (12kw), four-pole, fan cooled Up to 24,000, fully programmable with HSK 63F taper. Table: 60" x 144" (1524mm x 3658mm), Four (4) 1" (25mm) part location pins Aggregate-Capable Tool Changer: Max 12 tools, Max Dia. 3.25" (82mm) positions full; 6.5" (165mm) adjacent positions empty, Max weight 12 lbs each / 80 lbs total (5.4kg / 36.4kg) Max Length 5" (127mm) Feed Rate/Traverse: X-Axis 2500ipm (63.5mpm), Y-Axis 2500ipm (63.5mpm) Z-Axis 1200ipm (30.5mpm), Acc/Dec83.3 in/sec² Axis Travel: 149" (3784mm) x 82" (2082mm) x 8.5" (215mm) Positioning: ±0.0008" (0.02mm) linear axis repeatability accuracy Control System: Fanuc Panel i With integrated PC and 19" color display Dust Collection Interface: 6" (152mm) diameter (recommended volume 900 cfm) Includes: Dekker Vacuum Pump NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

KOMO MHS AUTOMATIC VACUUM PANEL FEEDER: -- Specifications: Single vacuum Infeed & Rake-Off system for Nested Based CNC Router operation.Designed for loading of a 5' x 10' (61" x 128") panel cap. CNC Router and can handle material up to that size; Load/Rake cycle time is approx. (25) Seconds. -- Operating Process:A fully Automatic sheet Feeder and Unloader. Designed for a single bunk application and the ability to load from 3 sides.As it moves the sheet over the router table the previously nested parts are pushed onto a conveyor or sorting table, the dust is cleaned from the router table by the dust collection on the front of the gantry and the new sheet is Squared up on the router table.Full Bunk of material is loaded into staging area constructed of tubular steel with cross-support and safety guides to properly position bunk, preventing damage by Forklift operator to loader base.Loading is performed via a vacuum cup system with (4) rows of adjustable vacuum cups, (2) cups per row; front-to-back spacing is fixed and cups are adjustable left-to-right.Material is picked up from the top of the stack and loaded onto the router table, pusher arms at front & right side square the material onto the table.After machining, the vacuum lift picks up another sheet for processing; as it brings it over the side, squaring arm rakes the processed panel and skeleton onto a side table. PLEASE NOTE: This unit will need to be integrated with the controller of your current CNC Router. Actual Model is KOMO MHS.

KOMO VR 510 FUSION CNC Router (ATC/Boring): -- Specifications:Heavy Duty "VR 510 FUSION" with 60" x 120" table, (4) parts location pins & vacuum table zones; precision machined 2" solid aluminum table, spoil board ready. -- Table travels on precision THK contour linear guideways, extra Heavy Duty fixed center supported gantry for full 10' of X-axis travel table coverage. -- Machining:(1) 16 HP High Frequency router with "HSK 63F" air cooled electro-spindle, variable speed 6,000 - 24,000 RPM; router has a 15-position dynamic ride along Tool Changer, ATC is front mounted, travels with router spindle and allows loading-and-changing of aggregates. -- Router spindle has air cooling through independent electric fans, ceramic bearings and internal blowing device for cleaning of the "HSK 63F" tool holder cones. - Router is mounted on slides for individual positioning by Servo motors. -- Boring:(1) 9-Spindle (5x4) Boring unit -- Travel:Closed loop Servo drive system with precision ground pre-loaded precision ball screws driven by FANUC brushless AC Servo motors at (65,536) pulses/revolution for positioning +/- 0.0004 on all axis at 0.001 - 3,150 IPM max. machining feed rate with 3,150 IPM rapid traverse on X- & Y-axis, 600 IPM on Z-axis. -- X-Axis travels 140", Y-axis 84", and Z-axis 15" with 19" clearance under the gantry, extended gantry bridge for full 60" x 120" table coverage by all work heads. -- All axes ride on extra-large THK precision contour linear guideways, all positioning bearings serviced by an automatic lubrication system. -- Operator Interface:FANUC Series computer control with: 10.4" High resolution CRT, 3-1/2" floppy and 1.6 GB hard drive; RS-232 ports, (MPG) handheld controller, full Qwerty keyboard & air conditioning system for temperature control. -- Remote pedestal at opposite side of machine for Cycle/Start/Stop. As well as Vacuum control, locating pins, and Pop-up roller balls on the table. -- Features:(3) Axes simultaneous control, background editing, self-diagnostic, canned cycles, absolute & incremental programming, cutter & tool length compensation, feed rate & spindle speed override, inch/metric operation, and linear/circular & helical interpolation. -- Includes Quincy vacuum pump.

KOMO VR 510 MACH ONE CNC Router with ATC and Boring 60" x 120" Moving table, Heavy Duty fixed bridge machine, front-to-back configuration.2" Thick solid cast aluminum table machined with a single vacuum zone, (3) pop-up pins for material location. -- Machining:(1) 12 HP "BT-30" Type ATC spindle, variable spindle speed from 6,000 - 18,000 RPM, (1) 8-station ATC tool carousel. -- Boring:(1) Boring Block with (6) Independent vertical spindles & (1+1) horizontal spindle in X-axis & (1+1) horizontal spindle in Y-axis -- All axes:Ride on THK linear guide ways, closed-loop AC Servo motors drive precision preloaded ball screws for positioning tolerances of 0.001" & 1,200 IPM rapid traverse rates. - Automatic lubrication system to service all ball screw & way bearings. -- GE/FANUC "210 I" Control:WINDOWS PC Front end, 10.4" high resolution color CRT, (3) axes simultaneous control, linear & circular interpolation, network compatible, RS-232 port, and handheld controller. -- Complete with:Background editing, self-diagnostics, high speed, high precision machining function, canned cycles, absolute & incremental programming, inch/metric capability, cutter & tool length compensation, and feed rate & spindle speed override.Note: There is "NO" Vacuum Pump Included.

KOMO VR 512 MACH II SHO 5 X 12 with ATC and Boring: -- Specifications:Table Dimensions: 144"; x 60"; (3,658mm x 1,524mm) Moving table. Axis Travels - X Axis: 159"; (4038mm), - Y Axis: 84"; (2133mm), - Z Axis: 11"; (279mm). -- Heavy Duty fixed bridge machine, front-to-back configuration, 2" thick solid cast aluminum table machined with a single vacuum zone, (3) pop-up pins for material location.Equipped with:(1) OMLAT 16kW (20 HP), liquid cooled, "HSK-63F" Type ATC spindle, variable spindle speed from 6,000 - 24,000 RPM, 12-station tool carousel, and (1) 14-spindle boring block with (14) independent vertical spindles. -- All axes: Ride on THK linear guide ways, closed-loop AC Servo motors drive precision preloaded ball screws for positioning tolerances of 0.001" & 2,500 IPM rapid traverse rates. - Automatic lubrication system to service all ball screw & way bearings. -- Operator Interface:Komo-GE Fanuc Panel i Control with HVI Servo System and Integrated PC, 10.4" high resolution color CRT, (3) axes simultaneous control, linear & circular interpolation, network compatible, RS-232 port, and handheld controller. -- Features: Background editing, self-diagnostics, high speed, high precision machining function, canned cycles, absolute & incremental programming, inch/metric capability, cutter & tool length compensation, and feed rate & spindle speed override. -- Complete with:(1) Kaeser Compressor model CSV 150, 40 HP Screw type vacuum system, assorted tool holders, original documentation and manuals.

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTISON 229 Push Feed Moulder4-Head Push Feed Moulder, 4" x 10" capacity. -- Head sequence: 10 HP Top head, 10 HP left head, 10 HP right head, 10 HP bottom head. -- 20 HP feed motor. -- 2-1/8" dia. top and bottom spindles; 1-13/16" dia. left and right spindles. -- Includes (6) extra heads that go with the machine.Approximate dimensions of 11 feet long, 4.5 feet deep, and 5.5 feet tall. The machine weight is approx. 5 Tons.

MATTISON - 69- 54: Automatic Lathe -- 54" Length capacity with working dimensions: 4" x 4" Max. x 3/4" x 3/4" min. -- Hopper feed with: Automatic chucking and pop-up. -- Spindle drive: 25 HP Motor; spindle dia.: 2-5/8"; arbor speed: 2,700 RPM. -- Feed rates: 2 - 45 RPM; Variable feed speed and double-end drive.NOTE: Lot of additional knives & heads available at additional cost.

MATTISON - 69-42 MATTI-MAX: Heavy-Duty Automatic Rotary, high production Turning Lathe with Hopper FeedMicroprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor; 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 25 HP - 2,700 RPM Cutterhead Drive; 2-5/8" dia. arbor with variable speed. -- 2 - 45 RPM Stock rotational speed with: 1.5 HP DC Drive (reversing) & self-contained hydraulic unit for precise feed control.Complete with: -- Automatic hopper feed; MATTI-MAX microprocessor-based PLC Controller with keypad entry; machine functions & operation parameters are set directly from the control; RPM of workpiece & feed rate can be programmed to vary during the cut.Matching the feed rate to the stock rotational speed produces an efficient cut.Features -- MATTI-MAX Allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. -- Pneumatic tailstock with: Dual pressure to ensure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load: 26.5 HP. -- Setup Stand.NOTE: Large quantity of knife & heads available for additional cost.

MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor, 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 20 HP - 2,700 RPM Cutterhead Drive, 2-5/8" dia. arbor with variable speed, 2 - 45 RPM stock-rotational speed via 1.5 HP DC drive (reversing) & self-contained hydraulic unit for precise feed control.. -- Complete With: Automatic hopper feed; MATTI-MAX microprocessor-based PLC controller with keypad entry; machine functions & operations parameters are set directly from the control; RPM of workpiece and feed rate can be programmed to vary during the cut. Matching the feed rate to the stock-rotational speed produces an efficient cut -- Features: MATTI-MAX also allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. . Pneumatic tailstock with dual pressure to insure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load 27 Amps.

MATTISON - 202: Straight Line Rip SawSpecifications -- 15 HP - 3,400 RPM Saw arbor motor; 9" - 14" max. blade capacity; 1-1/2" diameter arbor; overhead arbor design. -- 4" Max. depth of cut: 13" Min. stock length; 24" max. rip capacity to the right of the blade; 77" x 65" table size.Equipped with & Features --Overhead holddown with: (6) Pressure rollers; (3) front and (3) back; 2 HP feed drive; (4) feed speeds of: 56 - 84.

MATTISON - 404: Straight Line Rip SawSpecifications -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.); 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from: Saw to left edge of table. -- 24-1/4" Between saw & column; 24" rip distance: To right of gauge. -- Top roller holddown with: 7-1/2" Shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features -- Overhead cutting design with: Single cast chain links. -- Chain with: Automatic oil lubrication. -- Variable feed speed.NOTE from Seller: Saw will give an 8-foot glue line!

MATTISON - 202: Straight Line Rip SawSpecifications -- 15 HP - 3,400 RPM Saw arbor motor; 9" - 14" max. blade capacity; 1-1/2" diameter arbor; overhead arbor design. -- 4" Max. depth of cut: 13" Min. stock length; 24" max. rip capacity to the right of the blade; 77" x 65" table size.Equipped with & Features --Overhead holddown with: (6) Pressure rollers; (3) front and (3) back; 2 HP feed drive; (4) feed speeds of: 56 - 84.Note from the seller : Chain and lead guides are in very good condition.

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication.. --4-Speed Feed: 62 - 93 - 124, & 186 FPM.

MATTISON - 202, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,400 RPM Saw arbor motor, 9" - 14" max. blade capacity, 1-1/2" diameter arbor, overhead arbor design. -- 4" Max. depth of cut, 13" min. stock length, 24" max. rip capacity to the right of the blade, 77" x 65" table size.Equipped with & Features: --Overhead holddown with: (6) Pressure rollers, (3) front and (3) back; 2 HP feed drive, (4) feed speeds of 56 - 84 - 112 & 168 FPM (fixed at 25 FPM ).

MAX-PAK MP 60 HD-15 Vertical BalerSpecifications: -- 15 HP Motor --Nominal Bale Size 60" x 30" x 48" --Bale Weight Up to 1000 Lbs OCC --Platen Pressure 40.91 PSI --Average Cycle Time 49 Seconds --Loading Height 54-1/2" --Ejector System Semi-Automatic --Full Bale Switch Standard