KUNDIG DUPLEX 53-RC-E Wide Belt Sander (2) Heads; 52" Width cap. Drum, Combination Head.Head Configuration1st Head: 7-1/4" Dia. rubber covered contact roll, 25 HP motor.2nd Head: Combination head with rubber covered contact roll and segmented finishing platen, infeed sensors sense the panel and electronically control the platen height with timers, variable edge control can also be set, 20 HP motor.Specifications: Abrasive belt size 54" x 75" with air tensioning and electronic abrasive belt tracking, both heads with abrasive grit thickness adjustment, 2 HP Variable feed drive. -- Conveyor belt speeds 9 - 45 FPM, controlled by electronic inverter & adjustable on the control panel; infeed & outfeed rubber covered holddown rollers.Equipped with & Features: -- Workpiece thickness cap. 1/8" - 6-1/4", motorized thickness adjustment with LED readout. -- A joystick controls the conveyor opening and start/stop of the feed, automatic "over-thickness" protection and automatic conveyor belt tracking. -- Constant passline of conveyor height at 35". -- Air blow off of second head abrasive belt. -- Emergency stop button, motor load meters, magnetic controls.NOTE from the seller: There is a small leak in the air bladder . The sander has 6,541 working hours

KUPER - FLI 1250 INNOVATION Series: Feed-Through Veneer Splicer with Top & Bottom heating Automatic linear splicer with: Integral glue applicator. Can glue/join the edges of strips or similar pre-glued veneer. UREA-Based glue is preferable with veneers exposed to high temperatures during subsequent processing. Features -- Gluing system to: Join veneer edges passing through a high speed of PVAC or urea "disc style" glue application zone or will join pre-glued veneers for an immediate tight hold and joint.Heating System with: High efficiency and an effective heating width of only 12 mm. -- Size Capacity: Handles veneers: 0.3 - 2.5 mm (0.012" - 0.098") Veneer thickness; min. veneer strip length approx.: 350 mm (13.8"); min. strip width: 45 mm (1.77"); max. width: 49.2" (1,250 mm) on throat side. -- Equipped with Heating elements top/bottom with: Individual temperature control; approx. 3/4" (19 mm) wide narrow heating elements. -- Feed Chain/Drive: Maintenance-free high-efficiency plastic chains prevent heat conduction and stains.With dual upper & lower feeding transport Chains: Made of low heat conductive fiber. - Direct Drive variable feed speed from: 40 - 180 FPM; 1-1/2 HP (1.1 kW) feed drive; disc roller drive feeding system w/thickness compensation. -- Complete with: Stainless & chromed work surface; operator controls in rotating eye level height Control Panel; digital temperature settings & thermostats.Heating temperature: Approx. 220°C max; length of heating section: 1,200 mm (47.2"). -- Includes: Chiller "which prolongs the glue pot life". -- Floor space: Approx. 115" x 78" x 58" High (2,900 x 1,960 x 1,470 mm). -- Services required: Connected load: Approx. 11.8 kVA; Clean/Dry air supply: 1.2 CFM (30 Nl/Min) @ 90 PSI (6 bar). -- OUTSTANDING Feature comes with a selection of spare parts including: Brand-New feed chain! One of the cleanest machines of its type you will see for resale in recent times!

L & L 400HP Belt Driven DensifierSpecifications: -- Main motor: 400 HP -- Densifier tank thickness: 3/4" Wall -- Tank dimensions: 50" Dia. x 48"Equipped with: -- Funnel-top lid with interlocked limit switch -- Heavy-Duty operator platform with stairway -- Soft Start -- Infeed Conveyor -- Mezzanine -- Was used to process PE film scrapNOTE: Unit has seen very little use.

LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Lot of tooling. Table for flat/horizontal copying.Note: Machine completely gone over and all heads rebuilt in 2011 and used sparingly since.Actual model is 201-16.

LACEY-HARMER E-LINE Self-contained Visible Diode Laser End ShooterEconomical self-contained Visible Diode Laser; optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° - +40° C operating temperature, 90 V for 250 nano-Sec mechanical stock. Beam angle with 5 mW - 15 mW output, 636 nm wave length. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed -- Projects a line from approx. 12' to 15' depending on area lighting -- Consisting of two parts; (1) crossbar style mounting bracket, please add...$ 143; (2) axis slide brackets for easy positioning, add...$ 125 each or alteratively a simple universal stationary mounting bracket add...$ 30.

LACEY-HARMER LD-2002 Diode LaserEconomical self-contained Visable Diode Laser, optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° to +40° C operating temperature, 90 V for 250 nano-sec surge protection. Beam angle 5 to 90 degrees, 5mW to 35mW output, 636 nm wave length for lines up to 20' projection. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed. -- Optional items consist of: Crossbar style mounting bracket, please add...$ 90; axis slide brackets for easy positioning, add...$ 125 or alteratively a simple universal stationary mounting bracket, please add...$ 30.

LAGUNA BM23E-2 ... Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, (2) 3 HP motors, drills vertically from bottom.Specifications: -- Distance between first and last spindle 851 mm (33.50"). -- Spacing between zero and max. on the first head 0 - 4". Min. distance between two heads 7.25". Max. boring line spacing to the second head 24". -- 2,800 RPM spindle speed; collets accept 10 mm shank bits. -- Heavy overhead material holddown system with (4) pneumatic material clamps. -- (2) independent air throttles to control the drill-heads upstroke speed.Complete with: -- "Set screw" drill adapters, "quick set" system for depth of drilling. -- Extension fence with (3) flip-stops and foot pedal control.

LAGUNA SMART SHOP SUV - 48 CNC Router, 4' X 8' with ATC:48" x 96" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slots, including manual controls, approx 3,500 lb, "rigid" welded steel frame.Specifications: 48" x 96" x 9.5" Axis travel with 12" clearance under the gantry, Speeds of 2,000 IPM rapid travel X & Y with 1,000 IPM maximum cutting speed, Servo drive system for X, Y, Z and A (allows expansion to 4th axis)Spindle: (1) 12 HP "HSD" spindle with (ATC), 5,000 - 24,000 RPM Range, Ceramic Spindle Bearings. Supported by Automatic Tool Changer with (8) tool positions, tool rack includes assorted tool holdersAll axes: Ride 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis)Control & Operator Interface: The B & R Automation (Austria) System-matched controller and drive components for easy diagnosis and exceptional reliability. -- Machine features the networking, connectivity and online troubleshooting typically found in Windows environments without the Windows baggage. -- Runs industry-standard G-Code that can be created from any CAM software package. Program transfer to the controller can be accomplished with USB, or via Ethernet transferComplete with: Expandable control system for custom applications. Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run. Centralized lubrication system for all axis, assorted tool holdersIncludes: 10 HP vacuum pump for the six (6) independently controlled zones, Additional set of bits.NOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot. Digital Manual is available to the Winning Bidder A rigger is required. Buyer is Responsible for breakdown, loading, and removal. Laguna recommends a 6,000 lb capacity forklift with 72" forks

LAGUNA PRO 37 WIDE BELT SANDER1-Head, 36" width cap. - Combination sanding head with 4" dia. rubberized contact roll & 3" wide "dual action" polishing platen.Equipped with: -- Abrasive belt size 37" x 75" -- Pneumatic abrasive belt tensioning. -- Electronic abrasive belt tracking. -- 20 HP main drive motor. -- 1HP Variable feed speed motor for 12 - 60 FPM. -- 1/4 HP Conveyor bed elevation motor, with digital programmable thickness set up and AUTO-SIZE thickness system as well. -- Infeed & outfeed rubber covered holddown rolls. -- 0" - 5-1/2" thickness capacity.Complete with: -- Air-operated disc brakes on sanding head, emergency stop button

LAGUNA PX16 PLANERLoaded with features for convenience, power and versatility. The ShearTec II helical cutterhead features solid carbide inserts that produce an incredibly smooth finish and produce far less noise.Features: Segmented infeed roller lets you feed multiple boards without having individual boards stall out due to small variations in thickness -- Infeed/outfeed rollers instead of cast iron tables for a more compact footprint -- DRO and speed control are mounted on the control panel and angled toward the user for better ergonomics -- Large dust chute can be pointed left or right on the back of the machine for optimal hose routing -- Bed roller adjustment mechanism, Bed is secured by a 4-post system for consistent performance with every cut -- Infeed roller is serrated, while the pressure bar is located close to the cutterhead, virtually eliminating snipe -- ShearTec II cutterhead features 4-sided solid carbide inserts with a T-shoulder rather than a cone-shaped design, helping to prevent cracking of the inserts -- Deep gullets make dust and chips disappear quickly which produces a better finish -- ShearTec II inserts are 15 x 15 x 2.5mm, which is slightly larger and thicker than standard knives (14 x 14 x 2mm)ShearTec cutterheads have one more advantage: they are quiet!Specifications: -- Motor: 5 HP 60hz/23 Amp -- Bed Size: 16'' x 21-1/2'', Pull-Out Extension: 4'' -- Max. Depth Of Cut: 1/4'', Max. Stock Thickness: 8'', Min. Stock Thickness: 1/4'', Min. Stock -- Length: 8'', Max. Stock Width: 16'' -- Feed Speed: 16 – 28 FPM Variable Speed -- Dust Port Diameter: 4'' Left Or Right -- Cutterhead RPM: 5,000, Cutterhead Diameter: 3'', Cutterhead Insert #: 108 x 4-Sided Carbide, 6 Row -- Thickness Readout: Wixey DRO -- Noise (1m away): 83dBNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Laguna PSHAP 5030-0130 ShaperThe Laguna pro shaper combines a precision shaper with features normally found only in much higher-priced machines. For starters, the table measures an impressive 31″ x 39″ and is pre-drilled to accept most power feeders. The fence has a precision micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1/16″ adjustment to the fence. Offers 3 speeds with a unique quick-change poly-groove belt system rather than the traditional V-belt. Digital readout is standard for the spindle height. The pro shaper is also equipped with a reversing switch and all controls are mounted with an easy access panel. The fit and finish on this machine is top-notch and even includes a wheel kit built right into the base. Specifications: -- Motor: 7.5 HP -- Fence: Micro adjustment -- Table size: 39 - 5/16″ X 31 - 7/16″ X 3 - 1/2″ -- Spindle travel: 4″ -- Spindle size: 3/4″ and 1-1/4″ -- Capacity under nut: 6″ (for 1-1/4″) & 4″ (for 3/4″) -- Spindle speeds: 5000 / 7000 / 10000 rpm -- Table opening diameter: 7 - 5/16″ -- Digital readout: Standard -- Direction: Forward/Reverse switchNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Laguna Fusion F3 36" Fence Table SawLaguna Fusion line was developed for demanding woodworkers. Equipped with a precision fence, F3 features the Hi/Low aluminum extrusion known from European saws. The hybrid fence on the Laguna Fusion offers the best of European and American fence features. This fence is NOT designed to be used on the LEFT side of the blade! Rail or tube on the LEFT side is provided only to make the ON/OFF switch position. Permanently lubricated bearings & Acme screws are part of the internal DNA.Specifications: -- Dust Port Size: 4″, Blade Guard Dust Port Size: 1-½″ -- Maximum Blade Diameter: 10″ -- Arbor Size: 5/8" Arbor Speed: 4,500 RPM -- Maximum Width Of Dado: ¾″ -- Blade Tilt Direction: Left, Max Blade Tilt: 45° -- Maximum Depth Of Cut At 90°: 3-1/8", Maximum Depth Of Cut At 45°: 2-1/8"Features: 3HP TEFC Motor, Industrial Cabinet, Fence & Trunnions, 10 x 40 T Carbide-Tipped BladeNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot. Overall Width (side-to-side) 69", Overall Depth (front-to-back) 56", Overall Height 43"

LANGE MASCHINEN BAU B85K Edgebanding MachineSpecifications: -- Workpiece thickness: 8 – 50 mmWorkpiece width min.: approx. 75 mmWorkpiece length min.: approx. 120 mmEdging thickness: 0,4 – 3,0 mmMax edge thickness = Workpiece thickness + 4mm (2+2)One sided automatic edge banding machine with direct glue application to straight workpieces, high frequency cut off station, high frequency top and bottom milling unit, chain feed, double roller top pressure and work piece support. For ABS,PVC, melamine and strong wood veneer roll materials as well as fixed lengths.

LANGZAUNER G-5920 Cross-Cut Guillotine. Specifications: -- 35.5" Blade hydraulic pressure bar and knife; -- 5 Gal tank, pump is driven by 1.5 HP motor.Complete with: -- 2-Hand operation or foot pedal, Emergency-Stop, (3) photocells for safety, -- All safety guards per international standards.

LANTECH Q-300 Semi-Automatic Stretch Wrapper with Low-Profile RampSpecifications: -- Maximum versatility. Wraps large, tall, heavy or fragile loads including doors, windows and more. Production speeds 25 - 35 loads per hour. -- Maximum load size: Diagonal 73.5", Height 80", Weight 4,000 Lbs., Film roll diameter 10", Film web width 20".Equipped with: -- 65" Diameter Low-profile turntable with Variable speeds 0 -12 RPM & 3/4 HP TEFC. -- Power-roller stretch system - 200%. -- Micro-controller programmable control, Low-profile ramp.

LARICK 120 Single Spindle Profile Sander;Sands raised panels, and door edges.Specifications: -- 1" Dia. x 4" long belt driven arbor; 700 - 1700 RPM variable speed, 1 HP motor. Arbor is vertically adjustable. -- Complete with: 25" x 22" butcherblock maple table, enclosed fabricated steel base and large hand wheels for easy spindle adjustment. -- Includes: Sensing safety guard for anti-automatic restart protection.

LARICK 360 V Profile SanderSpecifications: -- Single head; 2 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, variable speed from 400 - 1,800 RPM; 4" vertical & horizontal spindle adjustment. -- Features: -- 36" x 33" Solid wood tabletop, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARICK profile discs made to customer specifications. -- Complete with: -- Enclosed fabricated steel base, dust hood w/piano hinge for easy access to sanding disc, stationary fence, and large hand wheels for easy spindle adjustment.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

Single head; 1 HP Belt drive motor, Fixed spindle, Mechanical controlled variable speed from 700 - 1,700 RPM, 4" vertical spindle adjustment. -- Features: 27" x 25" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust port, large hand wheels for easy spindle adjustment.