Sawmill Exchange
Sawmill Exchange
 800-459-2148
 713-729-6455

Sawmill Exchange specializes in brokerage of small mills. Thin kerf, circle, scragg and more - when you need a small mill call Sawmill Exchange FIRST!

Filtering

Reset All 

thru
 Used     New
Viewing Page 5 of 13
244 Results Found
Sort By 
Sawmill-Exchange
 800-459-2148
 713-729-6455
Keystone  Sharpening Equipment
$6,250

Keystone Stake Sharpener. Automatic. Model 1272. 12 inch to 72 inch long. 3/4 to 2" stakes. 480 volt. Auto broke point ejector.

 713-729-6455

 Call
2000 Kubota  GenSet
$5,500

2000 Kubota Diesel 32 HP engine with 500 hours.

 713-729-6455

 Call
Lenox FRICTION BANDSAW BLADES  Part and Part Machine
$2,250

Lenox Friction Bandsaw Blades: Pallet dismantling blades. 47 per pallet. 2 pallets available. 21'-6" Bimetal 1". .035 10 TPI. $2250.00 per pallet. Shipping weight 175# per pallet. Buyer responsible for cost of shipping. No rust, clean, new, in boxes. Dock side pick up. Asking Price: 2250.00

 713-729-6455

 Call
Lincoln 100 HP  Electrical
$3,000

Lincoln Motor. 100 HP with electronic soft start.

 713-729-6455

 Call
Little Chiper 27-5  Wood Chipper - Stationary
$8,000

REDUCED TO SELL! $8000. Little Chipper 27-5. 7" wide x 2 1/2" H in feed opening. 10' in feed conveyor belt. Designed to chip scraps from table or rip saws into sawdust. Has hydraulic motor. Like new condition.

 713-729-6455

 Call
LogMaster  Band Mill Thin Kerf
$32,000

Log Master LM-2 with 42 HP Kubota Diesel engine V1505 direct drive. Band length 19'1" x 1 1/2". Cap is 26' x 30". 2 joystick controls. Fair condition.

 713-729-6455

 Call
Lucas Mill  Misc
$900

Lucas mill extensions. There are four pieces 10 feet long to fit on Lucas mill which extends your cutting by 16 to 20 feet extra in length. Also has extra blades and will sell for $50 each.

 713-729-6455

 Call
2010 Lucas Mill EM8  Circular Sawmill
$18,500

2010 Lucas model EM8 - Electric 8-inch mill with a 20 HP motor, 240 v 3 phase - Custom planer attachment that was made to hook onto an existing dust collection system - Includes slabbing attachment. - Includes 3 blades - Custom made roller guide that mounts to the track to keep all the wires out of the way from the work - This mill is a swing Blade mill, planner, slabber, all in one - Cuts an 8x8 timber. - Comparable to 8-30

 713-729-6455

 Call
Manitowoc CHAIN FLAIL DEBARKER  Debarker
$80,000

Manitowoc Flail Debarker Qty: 2

 713-729-6455

 Call
Marathon  Electrical
$3,250

Location: Wisconsin Marathon Electric Frame 44ST Electric Motor. 100 HP, 890 RPM, 460 volt AC, high efficiency, new surplus motor. Call 800-459-2148 for more info

 713-729-6455

 Call
1983 Mattison 404  Gang Rip Saw
$4,500

1983 Mattison Straight Line Rip Saw - single blade, model 404. 3 ph electric with 15 HP motor. 2 HP feed motor with 2 feed speeds of 50 and 100 FPM. Cap 4" thickness.

 713-729-6455

 Call
Mattison 276  Moulder
$7,500

Mattison Moulder model 276. Top and bottom heads are Hydro Lock 8 Knife heads. All jointers for all heads included as well as all manuals. Has new electrical panel that was done in 2018. Just pulled from the plant and ready to ship.

 713-729-6455

 Call
1977 Mattison 276  Moulder
$3,500

1977 Mattison 4 head 276 Mattison Moulder. Includes 4 heads but no knives. 3 phase electric 480

 713-729-6455

 Call
Mattison 202  Gang Rip Saw
$3,800

Mattison 202 Straight Line Ripsaw. 220 V, 3 phase. Good condition.

 713-729-6455

 Call
McDonough  Resaw-Band
$65,000

Location: Pennsylvania 54" McDonnough Resaw with returns and run around. Electric driven with gear box and speed reducer. 3 phase electric motor. Includes electrical starters. Call 800-459-2148 for more info

 713-729-6455

 Call
Meadows Mills #3  Misc
$84,500

Complete Circular Sawmill Operation Available in Tennessee - Portable Saw Mill Meadows #3 - Diesel Fuel - 365 CAT Power Unit - Log Deck included - Frick Edger - Ready to Saw!

 713-729-6455

 Call
Meadows Mills #1  Circular Sawmill
$12,500

Meadows #1 Circular Sawmill last used about 5 years ago. Includes hydraulic log turner (not set up), 4 cylinder Detroit Diesel (possibly 71 HP). 48" blade. Mill was partially dismantled when moved to current location and now sits on foundation. Blade and belts are stored inside. Mill is under cover. Carriage is metal. Total track length 45' in 3 pieces (13'8", 15'4", 16'. Carriage is 16' long. Buyer is responsible for dismantling but a machine is available to help load mill.

 713-729-6455

 Call
Meadows Mills HEAD SAW  Circular Sawmill
$22,000

Meadows head saw with 4 head block carriage , computerized setworks, Corley cab, hydraulics and electric headsaw motor + 10 HP power pack $22,000 Delivered to your location.

 713-729-6455

 Call
Mellott 4 STRAND LIVE DECK  Conveyor-Live Floor
$6,500

Mellot Live Deck - 4 strand. 20' long X 15'5" wide. Has kickers for cants. Powered by hydraulic pump.

 713-729-6455

 Call
2015 Metavic  Log Loader
$27,500

Metavic 1800HD loader on 18RF cart. 18ft reach, 2300lbs lift at full extension. Boom rotates 270°, grapple is continuous. Grapple opens to 52" and closes to 4.5". 6500 lb remote controlled hydraulic winch. Electric brakes with 7 pin connector. Cart has 13ft bunk and is 18ft long total. 7.5 ft high by 7.5 ft wide. Has 400/22.5 Nokaan floater tires with bar tread.

 713-729-6455

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved