ORIGINAL 3579-20L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel. Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°, 3-3/8" @ 45° bevel; 32" crosscut cap. with 1" stock; 21-5/8" max. miter cut @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and manual chain feed assembly; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Available Options: -- Power feed saw head; pneumatic clamping systems; Mist Coolant System (manual for non-ferrous cutting); blade.

ORIGINAL 3579-22L Metal Cutting Radial Arm Saw (SD Series)SD Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel. Specifications: -- 7.5 HP TEFC Saw motor; 22.5" dia. blade; 1" x 3-1/8" saw arbor; 8" thickness cap.; 4" @ 45° bevel; 24" crosscut cap. with 3/4" stock; 21-5/8" max. miter @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; saw head features VFD technology; which increases the start-up speed of the blade by over 8 seconds with a slower, smoother start-up that slows and stops the saw over approximately 25 seconds to allow for consistent braking times; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to an extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Available Options: -- Power feed saw head; pneumatic clamping systems; Mist Coolant System (manual for non-ferrous cutting); blade.

OverBuilt - Baler/LoggerOverBuilt Baler/Loggers are: The fastest, most efficient Baler/Loggers any scrap recycler can own.Compressing scrap metal & vehicles into denser, stackable forms results in more efficient loading &transport. Approx (5,500) hours.Specifications -- Charge box open: 20’ x 8’-5";. -- Closed: 240"; L x 40"; W x 26"; H. -- Bale Size: 40"; x 26"; x Variable. -- Min. variable distance: 22";. -- Bale density: 25 - 80 Lbs/ft³. -- Main compression cylinders: 2. -- Logging force (per side): 175 Tons. -- Charge box door cylinders: 6. -- Baling force (per door): 255 Tons.

PAUL K34V/1000 RIP SYSTEM WITH (1) SHIFTING BLADE39.3" (1000 mm) max. cutting width x 4.1" (105 mm) max. thickness cap. -- Specifications: Bottom arbor design; (6) powered bottom and (6) powered top feed rolls propel lumber from the infeed system thru the Ripsaw.50 HP (37 kW) Main motor, 2,900 RPM driving a 2.362" (60 mm) dia. arbor with (1) moveable blade. Moveable saw has a shift-able range of 400mm.Moveable blade and fixed fence positions indicated by 15mw laser lights that project 16' lines down inbound boards. Arbor is removable on a slide system; -- Feed Works: 49 - 262 FPM (15 - 80 MPM) Variable feed speed feed drive; hydraulic drive to (3) sets of smooth top and corrugated bottom feed rolls before and (3) sets of smooth top and corrugated bottom feed rolls after the blades and individually controlled pressure to the feed rollers. With (3) sets of anti-kickback fingers. -- Equipped with: Automatic oiler, push-button station, upper dust hood and upper and lower dust chutes. In-feed roller table 980 mm with (7) rollers; universal type mounted to the machine. -- Operator Interface: 1 NCD control, VGA color monitor, features 10-width lists with 200 items (8 variable-width lists, 2 set-up lists for long bush fitted for fixed blades.) -- Machine is under power but not in production.

PEERLESS MONO 21 UNIT MATERIAL CHIP BINChip Bin main components: -- Bin with 21 Unit (4,200 cubic feet) capacity. -- Hydraulic power unit. -- Steel support structure. -- Clamshell-type material discharge doors. -- Price shown includes dismantling & loading onto trucks.

PIQUA - PW72-50, Semi-Automatic Wide-Mouth Horizontal Baler with MAX-PAK ConveyorSpecifications: -- Cylinder: 7" -- Main motor: 30 HP -- Bale size: 48″ x 36″ x 72″ -- Feed opening: 46" x 50" -- Cycle time: 20 Seconds -- Platen force: 86,600 Lbs -- Bale weight: 1,500 – 1,800 Lbs -- Door cylinder: 4" -- Door cylinder stoke: 12"; -- Conveyor belt: 60"Equipped with: -- 60" Infeed Conveyor with rubber belt.NOTE: New Conveyor rubber belt, paint, and safety stickers.

PNEUMAFIL 13.5-460-8 Reverse Air Dust Collector System;Reverse Air Dust Collector with 42,600CFM at 9 to 1 air cloth ratio, 4,738 square feet of filter area. -- 13-1/2' Dia. round baghouse contains (460) bags - 96" long by 5" dia. filter bags in galvanized cages w/reverse jet bag cleaning. -- Reverse Air from 15 HP blower motor which cycles once a minute over filter bags (rotating plenum covers each row of bags once a minute, reversing the normal air flow direction. -- Reverse Air action back flushes the bags and dislodges wood dust particles collected on the filter media which then fall to the bottom of the 60° funnel hopper for removal), bags are changed via walk-in door.. -- Material handling fan with approx. 48" inlet dia with 150 HP floor mounted motor (covered in a shed); 0.25 HP explosion proof motor for manifold drive. -- Rotary Air Lock, gearmotor driven at the bottom of the hopper feeding and shared horizontal screw type auger (if you want it) with gearmotor drive. -- Features: MOTOTRONICS Soft Start for main motor. FIRETEK Spark Detection System (subject to prior sale with adjacent unit). -- Includes: Explosion doors, sprinkler pipe, interior electrical control panel, support frame, safety ladder, railings, and exterior ductwork.Professional dismantling, rigging, transport and installation is available.NOTE: Unit being sold under this record is pictured on the left side on the first two photos. For the smaller diameter unit on the right side (DIXIE AIR) see record "DO-011266".

POWERMATIC Turbo Cone Dust Collector with Twin Canister Filter Kit;Complete with the following features: -- 3 HP 3 PH Material Fan, -- Generates 1,782 CFM. -- Ships from Oregon Coastal region.

POWERMATIC - 075: Dust Collector3 HP Freestanding Collector; 1,900 CMF; (2) 20" dia. x 48" upper cloth filter bags; (2) 20" dia. x 34" lower cloth collector bags with: 10 Cu/feet cap. -- Unit mounted on common base; comes with: (1) 8", (1) 6", and (3) 4" dia. outlets. -- Equipped with: Push-button starter switch; base mounted on: (4) Swivel casters: 96" x 26" x 60" height overall.

PRESTO XL36-20 Scissor Lift2,000 Lbs load capacity for evenly balanced load. -- 7-1/4" Lowered height. -- 36" Travel to raised height of 43". -- 17 Seconds travel time. -- Hinged platform for access to cylinders and internal power unit in collapsed position. -- 24" x 48" standard platform size. -- 3/4" Steel plate scissor legs. -- Heavy Duty hydraulic cylinders with chrome plated rams. -- Lifetime lubricated bearings on all rollers and pivot points. -- Electro-hydraulic 1 HP motor. -- Standard hand control pendant. -- Standard safety velocity fuses. -- Safety maintenance device.

PRESTO XL60-60 Scissor Lift6,000 Lbs. load capacity for evenly balanced load.Specifications: -- 10" Lowered height. -- 60" Travel to raised height of 70". -- 30 Seconds travel time. -- Hinged platform for access to cylinders and internal power unit in the collapsed position. -- 48" W x 96" L platform size, base 24" W x 86" L. -- 3/4" Steel plate scissor legs. -- Heavy Duty hydraulic cylinders with chrome-plated rams. -- Lifetime lubricated bearings on all rollers and pivot points. -- Electro-hydraulic 3.2 HP motor. -- Standard hand control pendant. -- Standard safety velocity fuses. -- Safety maintenance device.

PROGRESSIVE - Model SB/D 31, ...Dip Chain Gang Rip Saw.Specifications: -- 31" Cap. arbor with: Pneumatic arbor lock, 14" max. dia. tooling, -- 5" max. motorized thickness adjustment; 22" min. length for glue joint accuracy, 6" throat depth to fence side of blade. -- (1) 31-1/2" Saw sleeve with: Double-keys arranged for 3-1/8" bore saw blades. -- Equipped with: 75 HP - 3,600 RPM TEFC -- Direct drive motor, arbor with disc brake & load meter; 2-3/16" dia. turned, ground & polished saw arbor with outboard bearing; motorized vertical adjustment of arbor. -- Feed & chain: 34" Wide feed bed, -- 5 HP variable feed drive, feed speed from 30 - 150 FPM; adjustable jam protection. -- Dip bed carried on 2-1/2" pitch hardened double V-chain, extruded structural aluminum feed bed slats with replaceable Equipped with & Features -- "Safety Orange" polyurethane inserts; oil mist lubrication for extended chain life. -- (2) Infeed & (2) outfeed 4" dia. air loaded overhead pressure rolls; full width air loaded laminated bed holddown plate at saw arbor with +/- 1/4" thickness variation with pressure adjustment -- Pressure rolls & bed plate unit with manual height adjustment. -- Anti-kickback Finger System with: (1) Lower & (2) upper on infeed, (1) upper between feed rolls, and (1) upper assembly on outfeed. -- 5" Dia. dust outlet on upper infeed & 8" dia. dust outlet in upper outfeed; control panel mounted on infeed; saw sleeve and spacers. Note: Includes One Sleeve with a Collection of Spacers -- Owner's Manual Included -- Machine can be purchased As Is with a condition report (available on request), or you have it gone through ( As Is will be at a reduced price )

PTR - 2507-HD, ...2-1/2 Yard Stationary CompactorSpecifications: -- Charge box capacity: 2.5 Cu/Yd -- Clear top opening (L x W): 54-1/2" x 60" -- Total normal force: 59,376 Lbs -- Cylinder bore: 6" -- Cylinder rod: 3-1/2" -- Capacity per hour: 63 Cy/Hr -- Average cycle time: 57 SecEquipped with: -- Heavy-Duty structural steel components -- 3-Button controls

RAIMANN (WEINIG) - Variorip 310 M with: Infeed & (2) Moving Blades SystemClean, very hard-to-find 2014 (Infeed 2022) WEINIG RAIMANN Variorip 310 M: Optimizing Rip Saw with (2) moving blades & Infeed SystemSpecifications -- Working dims. Length: 24″ to 184″; width to 12.2″ (310 mm); thickness 0.59″ to 3.94″ (184″ is fence length). -- Cutting dims: Width min. 5/8″ (1st movable blade); min. 1-5/8″ to 10-1/4″ (2nd movable blade); fixed pocket 1″. -- Production in auto mode: 7 x 10′ Boards per minute. -- Saw. 50 HP Motor with: Arbor dimension of 2.6″; RPM: 4,200. -- Quick fix arbor (handturn nut) for position blades. -- Saw blade dia.: 12″ to 14″ (300 - 350 mm). -- Blade positions by: Ball screw adjustment. -- Chain: 12-3/4″ Width steel chain with every 3rd link with spikes. --. Automatic oiler for chain lubrication. -- The chain has auto shutoff when the oil level is low.Roto chain brush for: Continuous chain cleaning of debris. (4) Sets of anti-kickback fingers. -- Feed: Variable 26 - 157 FPM (8 - 48 MPM); 3 HP motor.Equipped with and Features: -- Controller: RAIMANN "TimberMAX" with: 15″ Color screen' storage for (100) cut lists. -- Production recording and yield. -- Also includes: (4) Lasers with mounts; spare parts; manuals.Footprint & Weight: Infeed is 3,306 Lbs and roughly 8' x 16'.Saw is: 4,603 Lbs and roughly 6' x 6'.The Saw slightly offsets the infeed. So, the footprint together is a little larger; ...probably closer to 9' x 23'.NOTE Saw is: 2014 INFEED is 202SOME Spec's need to be verified.

RAIMANN KR 310 2M Multiple Rip Saw System ( 2 Moving Blades )12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with & Features: -- Quick Fix arbor with: (2) Movable blade and (3) fixed blades; (4) Laser Lights. -- Enlarged movable saw housing with 25" pass through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. Cutting Specifications -- Cutting depth with 12" Dia. saw blades, 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed, 16 - 158 FPM, feed drive 2 HP motor.Additional Features -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.Note: Transformer for 600 volts included if necessary

RAIMANN KR 310 2M Multiple Blade Rip Saw System with Valu-Rip Infeed12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with: -- Quick Fix arbor with: (2) Movable blades and (3) fixed blades; (5) Laser Lights. -- Enlarged movable saw housing with 25" pass-through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. -- Raimtech E5 with TimberMax Software optimizing software; making it possible to get the most out of incoming lumber. The software optimizes rips for width or grade. TimberMax calculates the most profitable ripping solution for each board at which time shifting saw blades are positioned automatically. Infeed includes an infeed-belt conveyor with a pressure roller. Infeed is mounted on a slide that automatically adjusts the board in the best position before entering the saw. The conveyor is 24" wide X 120" long.Cutting Specifications: -- The cutting depth with 12" Dia. saw blades is 2-1/2" with a pressure shoe and 4" without a pressure shoe. -- The variable feed speed is 16 - 158 FPM, and the feed drive is a 2 HP motor.Features: -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over-thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.Also included: -- Valu-Rip infeed system 16' long -- (4) Movable Laser light Note: The machine, chain feed, and arbor, have recently been refurbished.

RAIMANN KM-US BV Gang Rip Saw with one (1) Moving BladeSpecifications: -- (1) Shifting blade with foot pedal control; -- Fixed blades mounted to individual collars that slide up-and-down the arbor into position, then lock into place by tightening the "Quick fix" nut on the arbor, no tools & no spacers required. -- 12" Dia. saw blades, 65 mm (2-1/2" dia.). -- Arbor, 3-1/2" max. depth of cut. -- 20" centers between upper holddown rollers (wood holddown shoe plate not included). -- 6" Throat depth to the right of the blade. -- 3/4" Min. strip width, 21" min. stock length.Equipped with & Features: -- Variable feed speed 16 - 110 FPM, -- Feed drive 1.2 HP motor; -- Chain spikes every 3rd chain link, -- Automatic chain lubrication, -- (2) Sets of top & bottom anti-kickback fingers, -- Extended infeed with additional bed roll, adjustable infeed fence. -- Complete with: Automatic over-thickness shutoff on infeed, -- Automatic starting, -- 8" Dia. dust hood. -- Includes (4) Lasers and Tooling as pictured.

RAIMANN - KR 310 2M: Multiple Rip Saw System (2 Moving Blades)12-1/4" Max. width cap.; 13-1/2" chain width; 50 HP - 4,200 RPM V-belt driven arbor.Equipped with and Features: -- Quick Fix arbor with: (2) Movable blades; (3) fixed blades. -- Movable Operator Pedestal with: LED Screen; pushbutton controls. -- Chain with spikes every 3rd link; automatic oiler with indicator light. -- Driven fluted lower roller with: Smooth upper roller for smooth feeding.Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers; 12" dia. dust hoods.Cutting Specifications -- Blade Diameter: 9.8" - 15". -- Cutting depth with: 12" Dia. saw blades; 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed: 16 - 158 FPM; feed drive: 2 HP Motor.Additional Features -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. ÷ Automatic starting and swing arbor mount for control panel.

RAIMANN - KR 310 2M: Multiple Blade Rip Saw System with Valu-Rip Infeed12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Specifications -- Quick Fix arbor with: (2) Movable blades; (3) fixed blades; (5) Laser Lights. -- Enlarged movable saw housing with 25" pass-through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link with: Automatic oiler with indicator light. -- Driven fluted lower roller with: Smooth upper roller for smooth feeding.Auto oiler for guide lubrication. -- (4) Sets of: Anti-kickback fingers & 12" dia. dust hoods.Cutting Specifications -- Cutting depth with: 12" Dia. saw blades; 2-1/2" with a pressure shoe, 4" without a pressure shoe. -- Variable feed speed: 16 - 158 FPM; feed drive: 2 HP motor.Equipped with & Features -- Sound enclosure with vertical pneumatic lifting. -- Adjustable infeed fence. -- Automatic overthickness shutoff on infeed. -- Automatic starting and swing arbor mount for Control Panel.Also Included: -- Valu-Rip Infeed system: 16' Long. -- (4) Movable Laser lights.

RAIMANN KR 310 2M Multiple Rip Saw System ( 2 Moving Blades )12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with:& Features -- Quick Fix arbor with: (2) Movable blade and (3) fixed blades; (5) Laser Lights. -- Enlarged movable saw housing with 25" pass through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler fo guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. Raimtech E5 with TimberMax Software optimizing software; makes it possible to get the most out of incoming lumber. -- The software optimizes rips for width or grade. -- TimberMax calculates the most profitable ripping solution for each board at which time shifting saw blades are positioned automatically. -- Infeed includes a infeed belt conveyor with pressure roller. -- Infeed is mounted on slide that automatically adjusts the board in the best position before entering the saw. -- Conveyor is 24" wide X 120" long. ( This option has to be verified )Cutting Specifications -- Cutting depth with 12" Dia. saw blades, 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed, 16 - 158 FPM, feed drive 2 HP motor.Additional Features -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.