#200 • Cornell Single Arbor Edger-Gangsaw Model: E760, SN: E760-0016-97, 2 moving saws, 60" wide infeed, edger 28" wide, gangsaw 28" wide, 3 1/2" collars, 2" collars, 1 1/2" collars, 1 1/4" collars, side press roll on gang side, control box, no power, 6" x 16' tailing belt on edger side, 27" x 16' tailing belt on gang side

#449 • CAT DP40K1 Forklift SN: AT19C01675. Meter reads: 4308 hours. Engine: 6 cylinder diesel. Fuel type: Diesel. Load capacity: 8000 lbs. Stage mast: 3. Mast height: 85". Reach height: 21'. Side shift: No. Fork positioner: No. ROPS: Enclosed. Tire size: (front) 8.25-15, (rear) 7.00-12. Tires: Solid. Features and Notes: Runs and operates.

#404 • 1999 Challenger Grinder Model: CH20040455, SN: 0999H0196, recent new cutter bits, 24" x 20' infeed vibrating conveyor, 5' fiberglass section, MDI metal detector with controls, variable feed drive on infeed with amp sensing reverse, 60 hp electric on head, feed rolls re-edged recently

#121 • Cornell Edger Gang Saw SN: HD4267035, SN: HD42670352-01, 21" edging capacity, 2 moving saws, 20" saws, only used as edge, 4' x 7' infeed table, 5" x 9' tailing belt with side drop, 2 laser lights, control box, hydraulic drive, support to ground

#127 • 2022 Helle Double End Trimsaw SN: 202062, 1 moving saw, computer set, hydraulic on saws, 24" x 25' scrap belt, 7" x 18' capacity, includes stairs and platform

#1350 • Hyster H60XM Forklift SN: H177B55473C. Meter reads: 1,927 hours. Engine: Perkins. Fuel type: Diesel. Load capacity: 5,500 lbs. Stage mast: 3. Mast height: 83". Side shift: Yes. Fork positioner: No. ROPS: Enclosed. Tire size: (front) 28 x 9-15, (rear) 6.50-10. Tires: Solid. Features and Notes: 5" x 42" forks. Contact Daniel Miller with any questions 440-321-5965

#3550 • Ingersoll Rand Air Compressor Model: IRN20H-TAS. Screw type, 75 cfm 380/460V 3 phase. Was working when disconnected 3/20/24. Contact Daniel Miller with any questions 440-321-5965

#127 • McDonough 6' Line Bar Resaw with Runaround Entirety of Lots 118-126 With 10% raise.

#120 • Morgan Chop Saw Kohler 23.5 hp gas motor, 20" blade, 16" x 15' skate roll feed, manual board stops, includes 18" x 10' detached skate rolls

#133 • Newman 8 Head Drop Tim Saw Missing 1 head, 20" blades, 7 1/2 hp electric motor on each head, 20' board length max, 9' x 25' overall, control panels, 30" x 16' slide pan

#148 • Brand New! Pallet Chief IV Pallet Nailer with Angled Deluxe Stacker Year: 2024, Model: IV, fully automated, 4 stringer, 48" x 48" maximum pallet capacity, requires 250cmf @ 120psi air supply, has 24V firing system and controls, NEW Quick-Adjust Feature, top & bottom nailing, automatic in-line pallet flipper, includes two nailing stations with automatic deckboard feeders and a Deluxe Stacker with and accumulation table, up to 3 pallets per minute with two-man operation! Pallet Chief will assist with setup. 5.5% sales tax. Contact Myron Nissley with any questions 574-536-2481. Location: N4977 County Road J, Kennan, WI 54537

#1000 • Toyota 7FGU30 Forklift SN: 60267. Meter reads: Unknown. Engine: Toyota. Fuel type: LP. Load capacity: 6,000 lbs. Stage mast: 3. Mast height: 90". Side shift: Yes. Fork positioner: No. ROPS: Open. Tire size: 28x9-15, 6.50-10. Tires: Solid. Features and Notes: Gauges not workin, park brake not working. Runs and operates.