Brewco B-1600 16” X 16” Horizontal Resaw, Left Hand, Serial number BEK12836. 75hp TEFC 230/460V saw drive motor. Traveling steel bed chains. Hydraulic variable speed drive. Hydraulic Linear Positioner saw setting. Does not include setworks computer, HPU, or operator's console. Uses 2” wide blades. Includes 13' x 7' wide infeed table with rolls, infeed chains, and cant flippers, 9' x 10 wide outfeed table with rolls, discharge chains, and stops, 20' long return rollcase, and 10' x 10' 4-strand inclined cant deck, all hydraulic powered. HPU's priced separately. Low hour late model system and all components appear in very good condition. Inventory No. 12444. Price, As Is, FOB Portland, OR -----------------------------------------------$24,500.

Jeffrey 55WBE Hammer Hog, serial number 1022138A, built 2006. · WBE Model utilizes Jeffrey Rader’s exclusive EZ-Access Technology · Replaceable breaker plate liners and side liners · Super rotor · 180 degree screen area for final product sizing. · Spherical roller bearings · Rotor diameter: 40” (1016 mm) · Rotor length:44 3/4 ” (1137 mm) Machine opening 43” x 33 ½”, discharge 46” x 77”. 24 to 50 Tons per hour capacity dependent on screen or grate size. Size: 63” High x 86” wide x 72” long 16,400 lbs. Includes 300hp TEFC 460V Electric Motor, New Rotor complete with hammers and drive end spherical roller bearing assembly, and New 4" Opening Grid Screen. Hog has been serviced and repaired in our shop. See photos of Jeffrey 55WBE Hammer Hog on our web site. Inventory No.12573. Located at our Portland, Oregon facility. Click on link for photos. Price, FOB Portland, OR ------------------------------------------------ $49,500.

Jeffrey Model B-3 36X24 Heavy Duty Hammer Hog, serial number 8392. All steel construction with a relatively recent rotor replacement. Mounted on a steel sub-frame with a direct connected 150hp 1,150 rpm TEFC Severe Duty 1.15 SF 480v electric motor. Current grate bars have 7.5" x 1" openings. 30" x 24" top infeed opening. Hog weight without sup-base or motor is approximately 9,000 lbs. Appears in good condition and has been test run with no balance or bearing issues. Inventory No. 12539. Located at our Portland, Oregon facility. Price, FOB Portland, OR ------------- $15,500.

Kockums L&B 7’ Late Model High Air Strain Right Hand Bandmill Headrig S/N 8853. 44,000 lbs max saw strain. 11” wide wheels have heavy rims with 1-3/16” on edge of top wheel and 1-3/4" on bottom and both mounted on non-rotating arbors. Hydraulic positioned upper guide and motorized wheel lift. Cartridge pressure saw guides. Includes tilt-back upper wheel guard. Saw length is 43’-6”. Bandmill is the heaviest most productive unit built and weighs 31,000 lbs. Maximum depth of cut under upper guide at highest position is 53”. Additional capacity can be achieved with an optional column riser. Currently sitting on 17degree removeable tilted base. Max fall down is 45-1/4”. New powered clearing belt for slab removal. This is one of the best 7’ Bandmills we have seen and is capable of carriage sawing speeds over 500 feet per minute. No motor. Current new price for this bandmill from USNR is approximately $750,000. We are offering this unit for a fraction of that price, FOB, Portland, OR. Inventory No. 12500. Price, As-Is, Cleaned and Painted FOB Portland, OR ------------ $89,500.

Used McDonough 54" Tilting Rollfeed Resaw. Resaw has been reconditioned. Mechanical strain. Non-rotating upper wheel shaft with bearings mounted in wheel. Top wheel is 7/8"-thick at edge of rim and has 7-1/4"-wide face. Feedrolls driven by variable speed hydraulic motor for speeds 40-220 FPM with hydraulic power unit. Wheel drive is 50HP 440-volt motor. Maximum stock size is 18"-wide x 24"-high. Will tilt up to 15º for bevel sawing. McDonough Style Cartridge Pressure saw guides with saw spray attachments. Will either center split or gauge saw. Air-operated roll opening controlled by operator's foot pedal. Inventory No. 12409C. Price, FOB Portland, OR --------------------------$29,500.

Precision Husky 48” Horizontal Feed, Bottom Discharge, 6-Knife Wastewood Chipper. Case and disc are in very good condition with almost no wear in knife slots. Includes V-belt drive pulley. Spout is 18” X 24” and will handle 24” slab or 11” round wood. Machine weights 5,136 lbs. Shipping size 4ft. 6” wide x 5ft. 4” long x 5ft. high sitting on 4” high blocks. Inventory No. 12319. Price, FOB Portland, OR -------------------------------------------------$12,500.

One (1) Used 1991 Precision 96” Model 96.27 Horizontal Feed, Side Discharge, 4-Knife Whole Log Chipper with 8" thick disc and disc brake assembly. Serial number is C.2422. 27” maximum log diameter. Chipper has not run heavy production and appears in very good condition. Many spare parts and knives included. Weight is 35,000 lbs. Average production capacity is 125 tons per hour. Inventory No. 10238. Price, FOB Portland, OR --------------------------------$29,500.

One (1) Used Salem 6’ Right Hand Air Strain Bandmill, S/N 8564879. Was last installed as a resaw and is in very good condition. Includes pressure guides, solid top wheel with 7/8” thickness at edge of rim and 11” wide. Inventory No. 11082. Price, FOB Portland, OR ---------------------------------------$29,500.

Salem 3-Block 36" Hydraulic LP Carriage, S/N 160799-93, built in 1999. Appears in very good condition. equipped with good rail, pantograph, cant flippers, on-board Brownsville turners, center knee tong-dog, chromed face and bed plates, 13" UHMW plastic insert wheels, on 60" track centers, and 20hp Inovec hydraulic power unit. Overall carriage width is 89". Bunk spacing is 108" and 75" left to right. Overall bunks measure 200". Top of bunks to top of rail is approximately 27-1/2". No setworks computer included. Inventory No.12392. Price, FOB, Portland, OR --------------------------------------------$19,500.

Used 5-Arm Heavy Duty Breakdown Hoist. 12' Spread across arms for packages up to 52" x 52" x 16' (or longer, depending on lumber species and size). Includes pull-chain shaft and 10hp 440v gearmotor drive. Hoist drive is 2-speed 30/15hp with brake and gearbox. Hoist has been cleaned and painted and appears in very good condition. Inventory No.12529. Price, FOB Portland, OR ----------------------------------------------- $ 19,500.