15 Results Found for Sawmill Viewing 1 - 15 of 15 results

Brewer BC-5

The Brewer Secondary Single Arbor Scragg Saw is designed to break down two sided cants from primary scragg into four sided cant. Equipped with centering device on in feed rolls to center cant with saw blades for maximum yield.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer BC-6

Edge slabs after the scraggs with the Brewer Golden Eagle Slab Saw Edger BC-6. Wide ranged variable speed allows the edger to work with the speed of the mill. As all of Brewer's machines are, built for high out put and built to last.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer Stave Turntable

The Golden Eagle Turntable is heavy built link to the stave runaround system constructed of 3/16” plate steel and powered by hydraulics of the stave saw with fences mounted on top to direct the flow of material.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer Run Around

The Golden Eagle Run Around System is designed to resaw barrel staves from log quarters requiring only one operator.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer Golden Eagle

The Super Golden Eagle Stave Band saw is a horizontal band saw designed to resaw stave quarters into boards at feed rates up to 100 feet per minute. Our stave bandsaw has the ability to run with up to 2” wide band blades.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-03 Band Saw

The Iron Eagles core is its massive saw head, weighing in at over 6 tons. This bulky strategy helps absorb the energy of large cants, minimizes the bounce and vibrations associated with lighter saws, decreases maintenance cost and downtime while increasing overall system lifespan. The rock solid saw platform also translates into increased blade performance and improved cut quality.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-05 Soft Tilt Board Separator

Iron Eagles Soft Tilt Board Separator (Patent Pending) addresses the inherent problem with a tilting roll case. Greasable heim joint style cylinder rod ends eliminate the non-stop replacement necessary in lighter systems. We also have a specially designed hydraulic circuit that eliminates the sudden stop when returning to center that puts undue stress on the system. Taken together this lessens machine wear, maintenance cost, downtime and extends the life of the system.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-03E Panel

Electronic control panels are professionally built with more standard features than competitor systems. The Iron Eagles electrical panel includes a main disconnect, soft starters with overload protection, a PLC with touch screen control panel and emergency stop buttons. All at no extra charge! No need to have a maintenance technician that’s a computer whiz. Remote access can be built into the system to allow our electrical experts to log into the PLC program and make adjustments or troubleshoot any problems that arise.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-08 Deluxe Cab

Iron Eagle’s deluxe operators cab comes standard with a luxury seat, arm supports, climate control and operator control stands to maximize both comfort and efficiency.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-01 Infeed Crossover Chain with Cant Turner

The Iron Eagle cant turners are strong enough to easily turn large cants and fast enough to turn small ones. Because they turn the cant off-line, there is no delay in feeding cants into the saw. This allows for continuous butt feeding assuring optimum throughput. The replaceable cushioned turning area minimizes bruising and reduces the shock and wear on the chain and chain bed. Minimal damage means maximum wood quality and equipment lifespan. Chain overlap eliminates deck transition jams caused by smaller cants and more consistent even-ending helps keep the system butt-fed.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-03C Controls

The automatic feed speed controls on the Iron Eagle saw and infeed roll case keep the system cutting at the optimum feed rate. Speeds are controlled by a mechanical feedback transducer. Lasers and ultra-sonic sensors are affected by wood color, density and other aspects of cants that can lead to inconsistent feedback increasing risk of band failure from large cants feeding too fast. Mechanical feedback eliminates this threat.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-06 Outfeed Crossover Chain

The super strong construction of the Iron Eagle transfer decks is engineered to eliminate the stress cracks and breaks prevalent in lighter built systems. Chain failure is a thing of the past with our heavy duty 81XH conveyor chain and premium #80 roller chain.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-02 Infeed Roll Case

The Iron Eagles infeed rolls are built with robust rolls to virtually eliminate bending, flexing and premature failure. Feed speeds are capable of forward, reverse and variable speeds with a variable frequency drive maximizing butt fed operations. Built for 18in x 18in x 18ft timbers and contains entry ports for crossover chain strands.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-07 Return Roll Case

The Iron Eagles return rolls are built with robust rolls to virtually eliminate bending, flexing and premature failure. An electronic eye is included for traffic control. Built for 18in x 18in x 18ft timbers and contains exit ports for crossover chain strands.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768

Brewer IE-04 Outfeed Roll Case

The Iron Eagles outfeed rolls are built with robust rolls to virtually eliminate bending, flexing and premature failure. The 5' isolated section is designed to carry cants up to 18in x 18in x 18ft from the discharge end of the band saw to the Soft Tilt Board Separator.
Brewer Machine & Parts LLC

Central City,KY
270-754-1768