Description:

SNX - nVISION System2 G2, ...Contour Edgebander + Optional Dual Telescoping Arms for simultaneous Contour Banding & Trimming -- Specifications: Curved (Contour) Edgebander allows 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding Workstations via turntable.Reduced learning curve/expertise for operation as Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The nVision Contour Bander can band a minimum material size of 150 mm (6") diameter.Max. material size of 2,400 x 2,400 mm (94" x 94"); max. material weight up to 104.5 kG (230 Lbs).Material thickness from 10 - 60 mm (0.4" - 2.36"); banding thickness from 0.5 mm thin tape w/low temp adhesive - 3 mm tape. -- Radii Capacity:Mini. internal (inside) radius: 80 mm (3.14"); min. external (outside) radius: 30 mm (1'-18") Based on 1 mm thick edge tape. Edgebanding thickness: 1 mm, min = R 30 mm Edge thickness: 2 mm, min = R 50 mm Edge thickness: 3 mm, min = R 80 mm Panel thickness: 10 - 60 mm with edge thickness 1 mm Panel thickness: 10 - 60 mm with: Edge thickness 2 mm Panel thickness: 10 - 45 mm With edge thickness 3 mm.IMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi, or rigid. -- Equipped with:(1) Thermal-regulated glue pot heated via: (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: TRIAX 3-AXIS Laser System (patented) for: Tighter butt joints & easy length identification with closed parts without the need for additional length measurement.Laser also detects: Tight radius and automatically slows the speed + resume the set speed when the detected radius has passed.Machine is also equipped with: Foot pedal for manual control/intervention. Motorized turntable for: Automated edgebanding application to large panels.(2) "Heavy-Duty" articulating arms: Support the parts during edgebanding and trimming; arm has a large interchangeable Vacuum Pod to secure panels during edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: Top & Bottom Trimming unit Centralized Control Panel with Simple PLC Touchscreen Interface with individual controls for all stations to enable manual feeding of panels if desired Banding station Edgeband Coil Stand Standard-size vacuum pod for articulated arm 80 mm Dia. (3") dust extraction outlet Foot pedal activation/de-activation control Larger feed roller