Equipment For Sale

Baker Furnace Inc Dry Kiln 3 phase 110V

Baker Furnace Inc Kiln 110V 3 Phase

Complete Drying System, 10.5’ x 32’ Triple Pass Drum Dryer, Wood Or Gas Dryer, 300 HP Fan & Cyclone, Excellent Condition!

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALESTRINI - 2 CAP: MortiserAutomatically mortises or bores round holes in chairs or case good.Specifications -- Twin tables with: Pneumatic holddown clamps, (1) on each side eliminating dead cycle time; 19" long tables tilt left or right 0° to 20°.Equipped with & Features: -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with: Adjustable bronze gibs and move by rack & pinion. -- (120 - 240) Oscillations/Min; 4-23/32" max. oscillation length. -- 3-1/8" Max. depth; 7/8" max. bit dia.; 13 mm spindle collet dia.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

2007 Bandit 4680T -8600 frame hours -C-27 1050HP -Refurbished 60 tooth mill -Spare hammers and teeth -New augurs -New grates and gate -New belly belt -New discharge belt -Comes with extra hammers and teeth

2019 Bandit 4680T Beast Recycler, Cat C32 1200 hp with 2582 hours, New Mill, New augers, New screen and gate, Radio remote, Magnetic head pulley. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 4680T Beast Recycler, Cat C27 1050hp, New gate and screen, New belly and discharge belts, Radio, remote, Magnetic head pulley. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 4680T Beast Recycler, Cat C27 1050hp, 250 hours on reman engine, New auger bearings, New anvil, New gate, New belly, and discharge belt, New Cutter bodies, Radio remote, Magnetic head pulley, Air compressor. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit 4680T Beast Recycler, Cat C32 1200 hp with 218 hours, Radio remote, Magnetic head pulley. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 2290 Track Whole Tree Chipper, 6,000 Hours, John Deere 350 HP Engine, 7 sets of extra knives, Babbit Included, Enclosed Cab with Heat and no AC, Rotobec Grapple, Undercarriage is 75%, Cat Infeed Chain 5-1/2 Foot long, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Bandit 2090xp 20" Drum Chipper, Cummins 350hp with 2378hrs. New clutch 500hrs ago, Radio Remote, Hydraulic Stabilizer, Hydraulic Discharge. Weight: 19,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 2090 20” Drum Chipper, John Deere 200hp with 1803 hours, Auto Feed, Winch, Hydraulic Turn Discharge and Jack. Weight: 19,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Bandit Beast 3680T Horizontal Grinder with 1,800 hours, 30 cutter bodies, Radio remote, Magnetic head pulley, Lot of spare parts goes with it. Length: 31' 10" Width: 11' 6" Height: 11' 4" Weight: 75,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 1590 18” Drum Chipper, 140hp John Deere with 5000 hours, Winch, Telescoping tongue, Cone holder, Hand crank turn and height adjustable discharge, Lift cylinder, Auto Feed, New engine harness, Just serviced and tires, One owner in very good condition ready to work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit 4680T Horizontal Grinder, Excellent Condition with very low hours, ready to work.

C18 Engine Warranty until 2028 or 5000 hours. Currently working in woods, hours will go up.