logging Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 75 of 88
1745 Results Found
Sort By 
Recently Added Items
2017 Ponsse Scorpion King
Call For Price
2017 Ponsse Scorpion King
2017 Ponsse Scorpion King
Call For Price
2017 Ponsse Scorpion King
2012 Ponsse Ergo
$174,900
2012 Ponsse Ergo
2023 Komatsu XT445L
Call For Price
2023 Komatsu XT445L
$ 125,000

2014 Tigercat 635E, 15,805 hrs., 15k frame hrs., 500 hrs. on rear and front chuck, engine 8k hrs. ago, all pins and the back half were re-done 500 hrs. ago, center has a slight bump in it, cold air, light works, no codes, reversing fan unhooked it 100 hrs. ago, small leak up front, $125,000 (Price includes the 500 hour tracks that are on it, For 10k less, I have a 60% set that can go with it instead)

 Glasgow, KY
B & H Equipment
270-261-1591
Call

$ 124,500

6k hours on engine, Dual Arch, Bogie, extended range fuel tank, 35.5 and 44’s

Forestry First
855-588-7871 ext:1
Call

$ 165,000

2016 Tigercat 635E -14,950 hours -No Blow by -Tight and dry -Chains with tracks

Josh Digirolamo
828-302-7264
Call

$ 246,000

MLS Number 11489109 2017 Tigercat 635G Skidder 8335 hours New Front + Rear Diffs within last year New Turbo New Rear Tracks

Keith Comeau
704-929-9122
Call

$ 270,000

LS Number 11563027 2017 Tigercat 635G Bogey Skidder 6493 hours

Mike Stuck
828-773-2204
Call

$ 219,500

Tires and chains 85% Tight and dry machine

 Bridgewater, NH
Michael F Sharp Enterprises
603-252-6689
Call

Call for Price

2023 TIGERCAT 635H BOGIE DUAL ARCH GRAPPLE SKIDDER

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

$ 360,000

2017 Tiger Cat LX830D Feller Buncher -10146 Hours -New stick with new pins for stick 1700hrs ago -Resealed tool cylinder -New butt plate 1700hrs ago -New radiator 1500hrs ago -New tilt cylinder pins and bushing 1700hrs ago -Updated cooler -Complete new undercarriage about 2200 hrs ago -Has been serviced with fully synthetic oils -Ready to work

Josh Digirolamo
828-302-7264
Call

$ 285,000

2017 Tigercat LX830D Feller Buncher -8,800 hours -330 hp Tigercat FPT C87 engine -No DEF -10 roller long track undercarriage is at 40% -23” hot saw head with 360 rotate -Wabasto pre-heater ONE OWNER MACHINE!!!!

Josh Digirolamo
828-302-7264
Call

$ 499,000

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

$ 430,000

2019 Tigercat Lx870D -5702 Tigercat head -Cuts 26" -5017 hours -Leveler -Tight and dry Woods ready

Josh Digirolamo
828-302-7264
Call

Call for Price

2023 TIGERCAT LX855E FELLER BUNCHER, C ST5702-26 FELLING SAW ATTACHED, SIRIUS RADIO, TELEMATICS, PRE-HEAT SYSTEM

 SUMMERSVILLE, WV
Ricer Equipment
740-289-4318
Call

Call for Price

2014 Tigercat L870C Feller Buncher, Equipped with a Tigercat 5802 Head with 360 Degree, 14,000 Hours Enclosed Cab with Heat and Air Conditioning, Fire Suppression, New Saw Motor, One new grab arm, All New Cylinders, New Hoses, 1 New Final Drive Motor, Newer Engine Pump, New OEM, Undercarriage is Good, Ready for the Woods Operating Weight W/O Attachment 66,870 lb Overall Length 18.18ft in Overall Width 10.83ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Seattle, WA
NEF Equipment
855-251-2648
Call

$ 189,000

2010 TIGERCAT H822C TRACKED FELLER BUNCHER 8.3 CUMMINS 5702B TIGERCAT HEAD

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 353,500

2019 Tigercat H822D, Equipped with a Tigercat 575 Processor Head, New Engine with under 1,000 Hours, Frame Hours 9700, Enclosed Cab Heat, Air, Radio, Undercarriage 85-90%, 28" Single Grouser, Fire Suppression, Ready for the Woods. Length: 35 ft 0 in Width: 11 ft 1 in Height: 10 ft 11 in Weight: 62,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Saint Paul, MN
NEF Equipment
855-251-2648
Call

$ 145,000

2008 H855 Tigercat -All major components have been done -Engine -Pumps -Rotec Bearing Swing Motor -Gearbox New Outer Feed motors -Waratah 622B -20,000 hrs on Carrier -Under 3500 hrs on all major components. -Lots of spare Waratah parts and spare engine.

Josh Digirolamo
828-302-7264
Call

$ 128,000

2015 Tigercat H855C - 20,242 Carrier Hours - 1,600hrs on engine (Warranty till August 2025) - 1,600hrs on Pumps - Original Chains and Pads, Approximately 75% - New Sprockets - Plumbed for Logmax Head - Single Operator Single Shifted

Josh Digirolamo
828-302-7264
Call

$ 315,000

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

Josh Digirolamo
828-302-7264
Call

Call for Price

2008 Tigercat 840 Cutter

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

$ 55,000

2004 Tigercat 1018 forwarder Swivel Cab -16k hours -HTC computer and control system and hydraulic fine tuning system has 6500hrs since replacement -Articulation rams resealed and one has had new piston and rod done -Tires are getting towards the end probably 30% one is new -Everything works as it should -Air conditioner needs a new condenser unit -Injector pump was replaced 1000hrs ago -Doesn’t use any oil at all ( 8.3l Cummins 24valve) -Hydraulic pump was rebuilt by previous owner around 6000 hrs ago -Changed oil and filters every 150hrs and just recently done a service and all filters -Articulation joint and swivel joint is in new condition very tight smooth no play THIS IS IN AUSTRALIA!!!!!!!

Josh Digirolamo
828-302-7264
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved