logging Equipment For Sale

2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.

Tigercat 240B with Washer Saw Still under power and available for inspection.

2013 Tigercat 234 Loader

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

2021 Tigercat 630H -6047 hours -Brand new rear end -Still working in woods -Can provide service records -35.5 tires 2 Brand new tires on the rear -Blows cold air -DEF deleted

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

2015 Tigercat 234

2009 Tigercat 620C

2011 Tigercat LX830C Feller Buncher, Equipped with a 26" Tigercat saw head with 360 Degree Wrist - model 5702-26. Completely Rebuilt Engine with 600 Hours, Frame Hours of 9900, 1,500 Hours on Saw Head, Flex Plate, Joy Sticks, Camera, 1 New Stick Cylinder, Rebuilt Stick and Main Cylinders, New LED Lights, Non Def Engine, Leveling Cab, Good Undercarriage, Meticulously Maintained, AC Compressor, and Compressor Condenser, Ready for the Woods. Weight: 71,606.2 lbs Length: 18.18 ft Width: 10.83 ft Height: 10.83 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Tigercat 610C Grapple Skidder, 11,000 hours, Brand new set of dbl diamond chains, Good running machine newer motor and hydraulic pump. Weight 33,995 lb Length 21.67in Width 11 ft Height 10.34ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Tigercat 240B Log Loader, Equipped with Enclosed Cab with Heat and Air Conditioning, CTR450, New Topping Saw, Decent Tires and Brakes, Hours are 11,400. Length 15 ft 10 in Width 8 ft 6 in Height 11 ft 1 in Weight 38,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493

Stick/bucket/thumb assembly for Tigercat 234/240B. $10,000. Good condition.

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

1999 Tigercat 726B Feller Buncher, 9700 Hours, New Cummins 8.3 Remaned Engine with Low Hours, All Cylinders Repacked, Enclosed Cab with Heat, Tires are 30.5 x 32 Center Section is Good. Ready for the Woods Length 20 ft 0 in Width 9 ft 9 in Height 11 ft 0 in Weight 28,040 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.