Equipment For Sale

2013 Bandit 2290 20” Drum Whole Tree Chipper, 440 Cat Diesel with 3,045 Hours, Tether Remote and New Radio Remote, 5 1/2’ Infeed Conveyor, Babbited Knives, Light Package, Dual Stabilizer... Popular for its great combination of size, production, performance and price, the 20-inch capacity Model 2290 whole tree chipper is a favorite for chipping tops and brushy material, either in traditional logging operations or land clearing projects. Its 24.5-inch by 26.25-inch throat opening easily accepts large diameter, brushy material. Dual feed wheels in Bandit’s unique Slide Box Feed System provide the industry’s best pulling and crushing power, while aggressive chip throwing power fully loads trailers in approximately 35-40 minutes. Length: 21’ 640.08 cm Width: 10’ 2” 309.9 cm Height: 11’ 6” 350.5 cm Weight: 40,000 - 46,000 lbs (18,143.7 - 20,865 kg) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit INTIMIDATOR 15XP Chipper with 378 hours on a PSI 5.7L 165 hp Engine, No PTO, Gas Engine, Murphy PV380 Panel W/ Reversing Auto Feed. Length:15’ 7” Width: 6’ 6” Height 8’ 8” Weight: 8,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 2290 Track Chipper with 5,700 Hours, Deere 600 HP Turbo Engine, Caterpillar 325 Undercarriage, Infeed System 5-1/2' Wireless Remote System, Enclosed Cab with Heat and AC, Electronic Controls updated by Bandit, Pumps updated to a larger pump, 2nd Owner. Ready for the woods. Weight:40,000 - 46,000 lbs Length:21 feet Width:10 feet 2 inches Height:11 feet 6 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit SG40 WALK BEHIND Stump Grinder with only 41 hours. Features an aggressive cutter wheel drive system, enhanced operator visibility, and enhances stability. Operator controls are mounted on a 3-poisiton console. Two joysticks control the travel of the unit, while a single, easy to use joystick controls all cutter wheel functions. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Bandit Model 5680 Beast Horizontal Grinder, Engine is a Cat 3412E V12 Engine, 1000 HP, Has 13,000 Hours, Wireless Remote, Air Compressor, Pintle Hitch, Ready to Grind. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Bandit 3590 Whole Tree Chipper, Equipped Currently as a Micro Chipper, Can be Changed, C-27 875HP TIER 2 Engine, NO DEF, Has Original 5200 Hours, Smaller Air Compressor Attached, Wireless and Tether Cord Remote Control, More Pictures Coming. Weight 76,000 lbs Length: 43' 5" Width: 11' 10" Height: 12’ 6” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barberan UV Oven

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

2009 BARKO 640 Forestry Mulcher with 3,430 hours. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 BARKO 295 ML MAGNUM SELF PROPELLED LOG LOADER 1,553 HOURS SAVAGE SELF PROPELLED TAILER 5TH WHEEL FOR TRANSPORTATION RECENT SERVICED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2012 BARKO 295ML LOG LOADER 4,529 HOURS GROUND SAW TRUCK MOUNTED JOYSTICK CONTROL VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2019 Barko 595B, 9435 hrs., Cummins Eng., New Self-propelled carrier, $120,000

Barko 612 Forwarder available in parts or complete

2022 Barko 495B with Barko grapple & Big John carrier

Heat/AC, CB Radio, Speakers, Enclosed

In Stock,New Barko 495B Log Loader, On Trailer, Rotobec Head, Delimber, Bar Saw Hydraulics, Call for a quote today.

NEW Barko 295B Loaders, Carrier Packages Available - IN-STOCK!

1995 Barko 160B Log Loader, Equipped with Lever Controls, 12' Bar Saw Slasher, Machine has around 8,000 Hours, Enclosed Cab with Heat, Owner never uses it so doesn't know if it works. Length 34 ft 0 in. Width 8 ft 4 in. Height 10 ft 0 in. Weight 20,400 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

New Barko 80 XLE Loaders IN-STOCK!

1998 Barko 160A Log Loader, Cummins Engine, CTR Saw, 5th Wheel Trailer, 7000 Hours, Ready to Work