Equipment For Sale

Polycarbonate windows for Komatsu 911.3 and 911.4 harvester. 1/2" thick abrasion resistant polycarbonate. Available in tint and clear. Check measurements to make sure you are ordering the correct window. The measurements above are the major dimensions, (widest and tallest points only). Call us Today at 715.560.3929

A/C 1996 US EPA Label Steel Body Liner 23.5R25 Tires

2015 Komatsu PC 170 LC Excavator 2700 hours Second owner Manual thumb Auxiliary hydraulics 30"bucket Backup camera Work ready

2015 Komatsu 430-3 Waratah -9600 hours -616C Head -Under Carriage done this spring -Hydraulic Oil cooler and reversing fan recently replaced Good working Machine!!!!!!

2022 Komatsu XT465L-5, 3,031 hrs., Cummins QSL9, late model Quadco 3200 360° head, 10” x 28 long single grouser pads 100%, Rollers, Sprockets, Idlers and Bushings all @ 80%, Fire suppression System, Back Up Camera, $399,500

LOCATED IN ALLENWOOD, PA

2016 Komatsu D155AX-8, 3535 hrs., Stk# KM16370, 3 shank ripper Eau Claire, WI, $379,500

Komatsu FD45T-7 Forklift 5.9 Cummins rebuilt 1k hours ago Approx 13k hours Single speed 10k capacity New batteries Work ready

28" Double Grouser tracks for 430 Komatsu and 445 Timbco, 735 TimberPro. Excellent Condition

2021 Komatsu WA 270 Hi Lift Wheel Loader with 1,256 hours, Komatsu care till 1500 hrs quick attach 3 yard JRB bucket. Operating weight 28,462 lb Overall height, ROPS cab 10'6" Overall length (bucket on ground) 25'5" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

One owner, 4400 original hours, excellent maintenance history. Tier-3 engine – NO DEF Quadco Saw 22? with 360 wrist 24? Single Grouser tracks (32” triple grouser available)

2006 KOMATSU PC200LC LOGGING PROCESSOR -Rebuilt pumps -Rebuilt motor -80% under carriage -sprockets idlers Boom cylinders were all repacked -622B Warthoug Processing head -has new monitor -new head module -new cab module -new saw motor -Cuts up to 28" timber

Komatsu D65PX-12 Dozer SN: 62612 New UC New pump Joysticks Screens Risers Runs and operates good

Quadco 22SC Sawhead

2013 Komatsu 430XT Harvester -12040 hours -Uc 40% -Ctl head 24 inch disk -Tight and dry -Everything works as it should Woods ready

KOMO - VR 510 TG Solution: CNC Router (ATC & Boring) -- Specifications5' x 10' Moving gantry; stationary table design in a front-to-back configuration with: 1-Zone phenolic vacuum plenum; (4) pop-up pins for sheet placement around perimeter.÷ Equipped with:(1) 12 HP - HSK-63F Type ATC spindle; variable speed from: 1,000 - 24,000 RPM; 10-station ATC tool carousel; (1) 9-spindle boring unit. -- All AxesUtilize FANUC brushless AC Servo motors; driving precision ball screws on the Y- & Z-axis; helical Rack & Pinion on X-axis. -- Ride-on Profile way-bearing Systems for:Rapid feed rates up to: 2,300 IPM Nn the X- & Y-axis; 1,200 IPM on Z-axis; motion components are serviced by an automatic lubrication system. -- GE-FANUC CNC Control with:WINDOWS Based control with: Color CRT screen; large hard disk for program storage; USB and RS-232 interface. -- LinearCircular & helical interpolation; automatic acceleration & deceleration; fast corner function; handheld teach pendant; absolute & incremental programming; feed rate & spindle speed manual override. -- Complete with:An assortment of HSK-63F toolholders; assorted collets; 25 HP TRAVAINI Vacuum Pump; documentation.

KOMO MHS AUTOMATIC VACUUM PANEL FEEDER: -- Specifications: Single vacuum Infeed & Rake-Off system for Nested Based CNC Router operation.Designed for loading of a 5' x 10' (61" x 128") panel cap. CNC Router and can handle material up to that size; Load/Rake cycle time is approx. (25) Seconds. -- Operating Process:A fully Automatic sheet Feeder and Unloader. Designed for a single bunk application and the ability to load from 3 sides.As it moves the sheet over the router table the previously nested parts are pushed onto a conveyor or sorting table, the dust is cleaned from the router table by the dust collection on the front of the gantry and the new sheet is Squared up on the router table.Full Bunk of material is loaded into staging area constructed of tubular steel with cross-support and safety guides to properly position bunk, preventing damage by Forklift operator to loader base.Loading is performed via a vacuum cup system with (4) rows of adjustable vacuum cups, (2) cups per row; front-to-back spacing is fixed and cups are adjustable left-to-right.Material is picked up from the top of the stack and loaded onto the router table, pusher arms at front & right side square the material onto the table.After machining, the vacuum lift picks up another sheet for processing; as it brings it over the side, squaring arm rakes the processed panel and skeleton onto a side table. PLEASE NOTE: This unit will need to be integrated with the controller of your current CNC Router. Actual Model is KOMO MHS.

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump