Equipment For Sale

2015 Komatsu 430-3 Hot Saw, approx 10,000 hrs., Undercarriage @ 85%, $199,900 Trades Welcome

KOMATSU 8,000 Lb. Capacity Dual-Fuel LPG/Gas-Powered Forklift Truck, with 9,385 Hrs. (As of 8/14/25)PICK-UP NOTE: Forklift will be in use and will not be available for pick-up until 9/22/25.Specifications: -- Max. fork height 20'. -- Free fork height 57".Equipped with: -- MANITOU "5501-5574-5533-L348" 4-Stage Mast, with 5"; W x 45" L x 25"; H Forks & Max. fork centers 42". -- 250-15 Front & 700-12 Rear solid pneumatic tires. -- Overhead guard.

28" Double Grouser tracks for 430 Komatsu and 445 Timbco, 735 TimberPro. Excellent Condition

LOCATED IN ALLENWOOD, PA

2006 KOMATSU PC200LC LOGGING PROCESSOR -Rebuilt pumps -Rebuilt motor -80% under carriage -sprockets idlers Boom cylinders were all repacked -622B Warthoug Processing head -has new monitor -new head module -new cab module -new saw motor -Cuts up to 28" timber

2016 Komatsu D155AX-8, 3535 hrs., Stk# KM16370, 3 shank ripper Eau Claire, WI, $379,500

Komatsu D65PX-12 Dozer SN: 62612 New UC New pump Joysticks Screens Risers Runs and operates good

Quadco 22SC Sawhead

2013 Komatsu 430XT Harvester -12040 hours -Uc 40% -Ctl head 24 inch disk -Tight and dry -Everything works as it should Woods ready

2015 Komatsu PC 170 LC Excavator 2700 hours Second owner Manual thumb Auxiliary hydraulics 30"bucket Backup camera Work ready

A/C 1996 US EPA Label Steel Body Liner 23.5R25 Tires

KOMO - VR 510 TG SOLUTION: CNC Router (ATC & Boring) -- Specifications5' x 10' Moving gantry; stationary table design in a front-to-back configuration with: 1-Zone phenolic vacuum plenum; (4) pop-up pins for sheet placement around perimeter. -- Equipped with:(1) 12 HP - HSK-63F Type ATC spindle; variable speed from: 1,000 - 24,000 RPM; 10-station ATC tool carousel; (1) 9-spindle boring unit. -- All AxesUtilize FANUC brushless AC Servo motors; driving precision ball screws on the Y- & Z-axis; helical Rack & Pinion on X-axis. -- Ride-on Profile way-bearing Systems for:Rapid feed rates up to 2,300 IPM on the X- & Y-axis; 1,200 IPM on Z-axis; motion components are serviced by an automatic lubrication system. -- GE-FANUC CNC Control with:WINDOWS Based control with: Color CRT screen; large hard disk for program storage; USB and RS-232 interface. -- LinearCircular & helical interpolation; automatic acceleration & deceleration; fast corner function; handheld teach pendant; absolute & incremental programming; feed rate & spindle speed manual override. -- Complete with:An assortment of HSK-63F tool holders; assorted collets; 25 HP TRAVAINI Vacuum Pump and documentation.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i63 The Flex Series of CNC routers from Komo Machine has been developed specifically for the customer who expects the utmost in technical quality and reliability at an economical price. These machines feature a moving gantry configuration and a side-mounted tool changer. Features: Four-pole, 16HP (12kw), 24,000 RPM, HSK 63F, fan-cooled spindle, 12 position automatic tool changer with aggregate capability, Air blast for optimal dust/chip evacuation and cooling of the cutting tool, Advanced Fanuc HVI servo system tuned for optimum acceleration and deceleration, Fanuc Panel i control with integrated PC 19" color display Construction, FEA "Finite Element Analysis" engineered structure, Heavy-duty steel fabrication Specifications Spindle: 1 Spindle RPM 16HP (12kw), four-pole, fan cooled Up to 24,000, fully programmable with HSK 63F taper. Table: 60" x 144" (1524mm x 3658mm), Four (4) 1" (25mm) part location pins Aggregate-Capable Tool Changer: Max 12 tools, Max Dia. 3.25" (82mm) positions full; 6.5" (165mm) adjacent positions empty, Max weight 12 lbs each / 80 lbs total (5.4kg / 36.4kg) Max Length 5" (127mm) Feed Rate/Traverse: X-Axis 2500ipm (63.5mpm), Y-Axis 2500ipm (63.5mpm) Z-Axis 1200ipm (30.5mpm), Acc/Dec83.3 in/sec² Axis Travel: 149" (3784mm) x 82" (2082mm) x 8.5" (215mm) Positioning: ±0.0008" (0.02mm) linear axis repeatability accuracy Control System: Fanuc Panel i With integrated PC and 19" color display Dust Collection Interface: 6" (152mm) diameter (recommended volume 900 cfm) Includes: Dekker Vacuum Pump NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

KOMO MHS AUTOMATIC VACUUM PANEL FEEDER: -- Specifications: Single vacuum Infeed & Rake-Off system for Nested Based CNC Router operation.Designed for loading of a 5' x 10' (61" x 128") panel cap. CNC Router and can handle material up to that size; Load/Rake cycle time is approx. (25) Seconds. -- Operating Process:A fully Automatic sheet Feeder and Unloader. Designed for a single bunk application and the ability to load from 3 sides.As it moves the sheet over the router table the previously nested parts are pushed onto a conveyor or sorting table, the dust is cleaned from the router table by the dust collection on the front of the gantry and the new sheet is Squared up on the router table.Full Bunk of material is loaded into staging area constructed of tubular steel with cross-support and safety guides to properly position bunk, preventing damage by Forklift operator to loader base.Loading is performed via a vacuum cup system with (4) rows of adjustable vacuum cups, (2) cups per row; front-to-back spacing is fixed and cups are adjustable left-to-right.Material is picked up from the top of the stack and loaded onto the router table, pusher arms at front & right side square the material onto the table.After machining, the vacuum lift picks up another sheet for processing; as it brings it over the side, squaring arm rakes the processed panel and skeleton onto a side table. PLEASE NOTE: This unit will need to be integrated with the controller of your current CNC Router. Actual Model is KOMO MHS.

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump

Komo VR508 CNC Router 60" x 120" Table 25 HP Sullair Vacuum Pump Dust Collector (10 or 15 HP - need to confirm) (2) Two main router heads with Quick Change (2) Vertical Drill Units (1) 8 HP 10" Saw Fanuc Control

2012 Komptech Cribus 2800e Trommel -4735 hours -74hp -1/2 1-1/4 in -7ft 2inch drum -Complete records on machine -Will produce up to 220 yards cube per hour

2013 Komptech Cribus 2800E trommel screen with 4,735 hours. Diesel generator Tier 3 for 480V/60 hz power socket for external power supply 480v/60Hz drums: 1/2" & 1-1/4". Power socket external supply towable, new fines cleated sidewall belt Oct 2020, new belly belt Aug 2020. Operating Weight 35,274 lb Length 34ft 9in Width 8ft 4in Height 13ft 1in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

KRAEMER B21/40 Shaker Style Rectangular Baghouse. -- General Data: 10,889 CFM Square Baghouse with (6) 55-gal. barrel waste collection underneath (barrels not incl.), 1,406 sq. ft. of filter media from 5" dia. polyester filters (washable) for mixed dust, 1.0 TEFC HP motor for mechanical shaker bag cleaning. -- Equipped with: KRAEMER 23" Material Handling Blower ground-mounted blower belt driven by a 40 HP TEFC. -- Includes: Support legs (not shown), panels forFilter Access/Explosion doors, Electrical Control Panel with motor starters. Msc. piping if you want it.. -- Overall dimensions of housing 112" by 112" by 148" Ht. Weight of housing about 3,500 Lbs.

KREG DK 3100 Pocket Hole Boring MachineElectric 3-spindle Pocket Drill; 1.5 HP direct drive electric motor; 39-1/2" table/ top working height; (0.5 - 1) Sec cycle time. -- Drills (2) pocket holes in (1) machining cycle across rails of varying widths with 3/8" dia. step bit in (1) smooth operation.... Drill spindles in the machine are fixed at 3/4" - 1" and 1-3/4" on center allowing it to handle most common rail widths of 1-1/2" up to 3-3/4" with ease. -- One of the (3) Spindles is with left-handed, simply remove one bit from the spindle not being used to set the desired 2-hole spacing. -- The bits are supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. -- Features: 15° Boring angle for greater stability, reduced screw breakout & splitting. This produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired. -- Includes: Pressure gauge & cycle counter, fence, holddown & clamping assembly, (2) 3/8" cobalt drill bits, and foot pedal control.