|
Complete Hemco Trimmer line W/Unscrambler, Even end Spiral Roll Case, Board Singulator, Even Ending Rollcase, Lugged Timed Chain Thur Trimmer, 20’Trim Saw, Lugged chain and Even End Rollcase And Hyd. Unit...
$50,000 Loaded on your trailer!
Equipment Location:Lafayette, AL
Abneyco Equipment LLC
706-590-3624
|
|
Newly Rebuilt/Refurbished Newman KM16 Trim Saw
5 overhead saw units with V-Belt Drives
7.5 hp, 1800 RPM, 3/60/230-460 arbor motors
1 ½ hp feed motors
20-60 FPM variable speed
#60 roller chains with 2 ¼” high chain dogs
Max material trim thickness – 4”
Minimum material trim length – 18”
Max material trim length – 16’
Saw blades – 18”, 1 ¼” bore, 5 negative hook, .050” side clearance
Scrap Conveyor – 12 wide, Lumber Conveyor – 12” wide, 1 ½” hp drive motor
Weight – Approximately 7000 lbs.
Floor space needed – 22’ x 6’9”, working height – 36”, overall height – 5’
480V to the Machine, 120V to the controls
- This machine has been rebuilt to the highest standards; Start operating this like-new KM16 for half the cost of a factory new unit.
Equipment Location:Sterrett, AL
Smith Companies
205-910-7777
|
|
Bob Hanna Double End Trim Saw with 20HP Motors.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
2-Saw System
Cut-off up to 20' long material
25 HP Motor on each saw
Waste Conveyor (Needs belt)
Equipment Location:MO
Carolina Machinery Sales, Inc
704-288-1904
|
|
Brewer Cant Trimmer. Made to go in-line with a gangsaw system 2 – 3HP motors with 16” blades. This machine is used to clip corners on boards when customers need a non-pointy corner to prevent product or packaging damage. It clips the whole cant before it feeds through a gangsaw.
Equipment Location:WV
Pallet Machinery Group
540-644-9220
|
|
New Carbotech 16' Drop Saw Trimmer
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
14' Capacity, RH Multiple Saw Trimmer with Lug Loader, 6" and 12" Cut Backs, Waste Conveyors, Motor Control Center, Additional Specs Upon Request
Equipment Location:South East
Keith Comeau
704-929-9122
|
|
Unused. Cooper drop saw trimmer to trim 6' to 12' lengths.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
|
|
20' CORLEY DBL END TRIMMER W/BLOCK CONVEYOR & CONTROLS
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
CORLEY drop saw trimmer. Right Hand. Will trim from 6' to 20'. 10 HP motors on each saw. Includes block belt and guards. $15,000.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
|
|
Cornell 20 ft 6 Head Multi Saw Trimmer, No Starter Package, Control Console. Waste and Board Conveyor, Even Ending Rolls
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
|
|
Cornell 20' Double End Trim Saw S/N 307-9-86
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Trim Saw Comes with or without Hydralic Package. Comes with or without Hydralic Package.
Equipment Location:AL
Pallet Machinery Group
540-644-9220
|
|
Trimsaw. This machine is a Crosby 3-saw trimsaw.
Item #00230
Equipment Location:Sturgeon Lake, MN
|
|
Crosby Double End Trimmer 20" Saw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Two (2) saw timber trimmer. NO setworks. As is where is $9,000.00.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
|
|
Fast Line Fast Cut II Double End Trim Saw, Pass 9' Boards S/N 23941018
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
GO FAST TRIM SAW
Two Saw
10HP
6' X 4" Capacity
Like New
Equipment Location:South East
Carolina Used Machinery
828-773-2204
|
|
20' HEMCO 9 SAW TRIMMER W/CONTROL BOX
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
20' HEMCO 3 SAW DROP SAW TRIMMER W/MTR & DR
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|