• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
48 Results Found for Trimmer Viewing 1 - 20 of 48 results
PREMIUM LISTINGS
NEWMAN KM16 MULTI HEAD TRIM SAW. RUNS GREAT.. PRICE IS FIRM.
Equipment Location:Woodruff, SC
Upstate Custom Pallets LLC
864-433-0445
Newly Rebuilt/Refurbished Newman KM16 Trim Saw 5 overhead saw units with V-Belt Drives 7.5 hp, 1800 RPM, 3/60/230-460 arbor motors 1 ½ hp feed motors 20-60 FPM variable speed #60 roller chains with 2 ¼” high chain dogs Max material trim thickness – 4” Minimum material trim length – 18” Max material trim length – 16’ Saw blades – 18”, 1 ¼” bore, 5 negative hook, .050” side clearance Scrap Conveyor – 12 wide, Lumber Conveyor – 12” wide, 1 ½” hp drive motor Weight – Approximately 7000 lbs. Floor space needed – 22’ x 6’9”, working height – 36”, overall height – 5’ 480V to the Machine, 120V to the controls - This machine has been rebuilt to the highest standards; Start operating this like-new KM16 for half the cost of a factory new unit.
Equipment Location:Sterrett, AL
Smith Companies
205-620-4455 ext:111
STANDARD LISTINGS
Bob Hanna Double End Trim Saw with 20HP Motors.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
New Carbotech 16' Drop Saw Trimmer
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
14' Capacity, RH Multiple Saw Trimmer with Lug Loader, 6" and 12" Cut Backs, Waste Conveyors, Motor Control Center, Additional Specs Upon Request
Equipment Location:South East
Keith Comeau
704-929-9122

Crosby 3-Saw Trimmer

Call for Price
Trimsaw. This machine is a Crosby 3-saw trimsaw. Item #00230
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232

Falcon Trimmer

Call for Price
Max board length and width is 18ft 1" x 61/2" (tip to end is 8") The saw motor is 71/2 HP It has been at least 10 years since machine was powered up and run Blade size is 20" 5-Headed machine 2 conveyors; 1 for cutting and 1 for waste lcon Trim Saw ready for a new owner! Seller is not sure about voltage, but confirms it's a low voltage machine
Equipment Location:NY
Carolina Machinery Sales, Inc
704-288-1904
Fast Line Fast Cut II Double End Trim Saw, Pass 9' Boards S/N 23941018
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
The Go Fast TS10 Trim Saw is a heavy duty and compact machine, perfect for trimming boards to size. The easy to use moveable length stops are quick to adjust and allow for multiple, simultaneous board sizes. SIMPLE, SAFE AND STURDY: The easy stop system makes it SIMPLE for the operator to cut boards to length. The operator can SAFELY cut boards without ever having to stand on the blade side of the machine or have their hands near rotating shafts and sprockets. STURDY is one thing Go Fast had in mind when making the TS10 Trimmers. Weighing approximately 1,600 LBS with 3X3 tubular framing, you can bet that these saws will be around for the long run!
Equipment Location:Shiocton, WI
Go Fast Mfg LLC
920-986-1173
20' HEMCO 9 SAW TRIMMER W/CONTROL BOX
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
18' Hi-Tech Drop Saw Trimmer with Grading System
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
HMC Trimmer - 2 saw trimmer model ET-10 with 15 HP saw motors and hydraulic setworks. Includes waste conveyor belt. Cuts up to 8" thick and up to 20' long. Right hand.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
HMC ET-10 Double End Trim Saw with Belt S/N ET-10-267-90, 6' Up to 20'
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
HMC 2 saw trimmer, right hand, with operator on left. includes: sub-steel, catwalk and ladder and built-in drag chain for waste. Complete with electrical control panel controlling the trimmer, the infeed system and the outfeed system.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Irvington Moore 16' Pass Thru Trimmer with Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
16' Irvington Double End Trimmer 20" Saw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Irvington 20' Line Shaft 9 Saw Trimmer with 50HP Motor, 17' 11 Strand Feed Thru with 96" Even enders, 20' Lug Loader with 5' 6 Strand feed thru & 9' 8 Strand Decline Transfer with even enders.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
LSI 9 Saw 20' Trimmer with Lucidyne 200 Grade mark Reader scanner, 20' Lug Loader Thru Feeder, GE 8000 Line MCC,20' Gravity Roll Tray Sorter 14'. Full Meal Deal.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
LSI 20' 10Saw Trimmer with 16' 10 Strand Deck, 8' Even End rolls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
New Never Installed 2007 Mill Tech Precision End Trim Saw; Clam shell Opening P.E.T Trimmer with 2 Banks of Motorized Saws; Right Hand Lumber Line; Each Bank with W/Zero Saw & 3 P.E.T.Saws W/Infeed System; Operates on Skip Lug Basis with Mill Tech; Inches & Centimeters
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351