Time Saver For Sale

TIMESAVERS 2321-24-01 Wide Belt Sander (2) Heads43" width cap. Drum, Combination HeadHead configuration:1st Head: 8" Dia. rubber covered contact roll 65/70 Duro. , 25 HP motor (4,000 RPM);2nd Head: Combination head with 5-1/2" dia rubber covered contact roll and 2-1/2" wide finishing platen, 20 HP motor (3,500 RPM)Specifications: -- 43" x 75" Abrasive belts with dual "Posi-Trak" electronic solid-state tracking --Conveyor belt feed with AC inverter variable feed from 15 - 45 FPM. -- Infeed & outfeed spring loaded holddown shoes or rollers on all heads --Automatic part thickness set-up, motorized thickness adjustment with digital indicator, 0" - 6" opening, and infeed safety stop bar. -- (4) Jack screws for bed adjustment --Compressed air requirements: 4 CFM @ 90 PSI --Dust extraction requirements: 2,700 CFM --Electrical requirements: 126 full load amps @ 230 VoltEquipped with & Features: -- Controls mounted on belt loading side -- 14" infeed conveyor area -- Sanding head motors with air caliper disc brakes, and motor load meters. -- Well maintained and serviceNOTE Constant Passline Sander 33"-38"

TIMESAVERS 36" SPEEDSANDER WIDE BELT SANDER1-Head; 36" width cap.; combination sanding head with: 4" Dia. contact roll & 1-1/2" wide polishing platen; 7-1/2 HP, 1-phase motor. -- Abrasive belt size: 37" x 60" with: Electronic abrasive belt tracking; 4" max. thickness with: 34" - 38" pass line; rough-top conveyor with: 5 - 20 FPM variable feed via AC Frequency drive. -- Equipped with: Air activated emergency brake; outboard door interlock; infeed emergency stop bar; emergency stop buttons on outfeed. -- Includes: (1) 4" Dust outlet; ProScale digital readout; casters.

TIMESAVERS - 1311-13-1: Single-Head Wide Belt Sander1-Head; 37" cap.; 0 - 5" opening (33" - 38" pass line). -- Combination head with: 4-3/4" Contact roll & 2-1/2" finishing platen; 15 HP motor; 37" x 60" abrasive belt; disc brakes on main motor; centralized control panel. -- Features: Digital thickness readout; double infeed & outfeed holddown rollers; variable feed speed from 20 - 40 FPM; hour meter; main motor load meter/watt meter. -- Includes: Dial indicators on drums/platen; auto setup device; motorized lift; 13" infeed loading area; (4) bed jacks; quick release outboard support; through-beam abrasives belt tracking; infeed stop bar; UL listed controls.NOTE: Extra Sanding belts included.

Timesaver - Series 1300: Wide Belt Sander (3) Heads43" Width cap. drum; drum combination head.Specifications -- Dial indicators on drums/platens. -- 8" Drums. -- 5 1/2" Dia. on combination heads. -- 2-1/2" Width platen on combination head. -- 75" Abrasive belt length. -- 0 - 5" Opening (33 - 38" pass line).Equipped with & Features: -- Disc brakes on main motor. -- 20 - 45 FPM Feed speed A/C. --Auto set-up device. --Motorized lift. -- 14" Infeed loading area. -- Quick release outboard support. -- Through-beam abrasive belt tracking. -- 15" Minimum part length. -- Emergency stops at infeed and outfeed location.

TIMESAVERS - 2321-23-21, ...Planer Sander (2) Heads2-Head; 36" width cap.Specifications: -- 1st Head. 6" Dia. Helical head with: (6) Spirals of 4-sided carbide inserts; 25 HP motor. -- 2nd Head. Combination head with: 5-1/2" Dia. contact roll and 2-1/2" wide finishing platen; 20 HP motor; sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments. -- Conveyor belt feed with Variable feed speed 20 - 45 FPM; automatic conveyor belt tracking. -- Anti-kickback fingers on infeed; planer head with sectional infeed shoe and double hold-down rolls on outfeed; double infeed and outfeed rubber-covered hold-down rolls on the sanding head. -- Motorized part thickness adjustment: 0" - 5" With mechanical digital readout. -- Minimum part length: 15"; pass line height: 33"-38". Complete with: -- Controls mounted on belt loading side; air activated caliper disc brakes on all heads; load meters for each head; 14" infeed loading area. -- Dust extraction: 3,500 CFM; compressed air usage: 3 CFM @ 90 PSI. -- Total load amps at 230 Volts - 145 Amps.

Unused machine - never put into service! Manufacturer specifications: Timesavers Wood Distressing Sander Adjustable brush heads Dial indicators on each head 24" width Brushes powered by 7.5 hp motor 33" - 38" variable passline 9.5" diameter brush head Double infeed and outfeed hold-down rolls Go to device Infeed stop bar Main motor lead meters Oscillation on brush VFD on each head. 2 heads (16 gauge crimp and nylon abrasive impregnated 80 grit) 15-45 FPM speed 200-12200 rpm abrasive brush CW/CCW 0-5" thickness machine opening 25" maximum width 62 FLA (full load amps) 3,100 CFM dust collection flow 2 CFM air supply flow 3/60/230 volt The Distresser is a top-of-the-line machine that can distress material such as; flooring, furniture parts, signage, cabinets, millwork, solid wood panels, veneer panels, old barn wood, and many other types of material. It can run cabinet doors, face frames, moulding, trim, solid wood, veneer panels, flooring, and more.

Timesavers 37" Planer Sander Helical Planer Head