Equipment For Sale

2015 CAT 501HD Processor, approx. 14,000 hrs., Undercarriage @ 95%, Very Clean, local trade, Trades Welcome, $149,900

CAT G126 Contractors Grapple FOR USE WITH: "CB" Linkage FOR USE WITH: PIN ON OR PIN GRABBER COUPLER Online Owner's Manual

3.3 YD3 FOR USE WITH: IT (standard) Quick Coupler Incl. Bolt-on-cutting-edge Light Material bucket. Width 2550mm (100").

CATERPILLAR MANUAL PIN GRABBER COUPLER CATERPILLAR MANUAL PIN GRABBER COUPLER PINS INCLUDED SOLD AS IS Works with CATERPILLAR 301.4C / 301.5 / 301.6C / 301.7D/ 301.7DCR / 301.8 / 301.8C/ 301.5 / 301.6 / 301.7CR / 301.8/ 302CR

.80 CUBIC YARD CAPACITY 4 GENERAL PURPOSE TIPS CATERPILLAR 36" HEAVY DUTY BUCKET CATERPILLAR PART NUMBER 550-9703 COMPATIBLE WITH WainRoy XLS System Couplers FOR USE WITH: Pin Lock Coupler 512-6578 or 514-9167 or Higher P/N GENERAL PURPOSE SIDE CUTTERS PIN LOCK LUGGING SOLD AS IS

15.9 CFT HEAPED CAPACITY 310 LINKAGE CATERPILLAR 36" HEAVY DUTY BUCKET INCLUDES 5 J225 TIPS PINS INCLUDED SOLD AS IS

.085 CUBIC YARD CAPACITY CATERPILLAR 18" GENERAL PURPOSE BUCKET DOES NOT INCLUDE BUCKET PINS DOES NOT INCLUDE BUCKET TEETH NOT FOR USE WITH 302.2D OR 302.4D SOLD AS IS

CONNECTING LINES NOT INCLUDED 4 PIECE BOLT ON CUTTING EDGE CATERPILLAR 2.7 CYD MULTI PURPOSE LOADER BUCKET CATERPILLAR PART NUMBER 362-0902 FUSION LUGGING SOLD AS IS

2 trip edges 203 mm (8") height each with a 1 piece bolt-on cutting edge and each with 4 adjust. trip springs CATERPILLAR 12' SNOW PLOW CATERPILLAR PART NUMBER 481-3673 HYDRAULIC ANGLING - 30 DEGREES LEFT OR RIGHT OF CENTER INCLUDES 4 Trip Springs and 2 Heavy Duty Adjustable Skid Feet INCLUDES HYDRAULIC LINES WITH "TWIST TO CONNECT" QUICK DISCONNECTS IT STYLE LINKAGE REQUIRES: 3rd Valve on the machine SOLD AS IS

CATERPILLAR FULL ROTATION THUMB CATERPILLAR PART NUMBER 305-6745 FOR USE WITH CATERPILLAR 307-309 FOR USE WITH PIN GRAB COUPLER INCLUDES CONNECTING LINES INCLUDES MOUNTING PINS SOLD AS IS

93" OVERALL WORKING WIDTH CATERPILLAR PART NUMBER 608-0660 CATERPILLAR PR121 POWER BOX RAKE FOR USE WITH STANDARD FLOW HYDRAULICS INCLUDES HYDRAULIC ANGLING REQUIRES: Work Tool Harness and 4 button left hand joystick on machine SOLD AS IS

LIGHTING. PRODUCT LINK. ULTRA LOW SULFUR DIESEL FUEL. ENGINE ENCLOSURES. EPA LABEL. BLADE, SINGLE ANGLE TILT. DRAWBAR. BLADE, PAT. STEER, JOYSTICK. OROPS. BLADE, S. HYD CONTROL. Additional Information CANOPY, JOYSTK STR, PAT BLD, SAT BLD, DRAWBAR, 25" PADS. CONDITION AND HOURS SUBJECT TO CHANGE. Online Owner's Manual. PLEASE CALL FOR MACHINE LOCATION

2021 CAT 299D3 Skidsteer, air & heat, HI FLOW, 2 spd, NICE JOB READY MACHINE

114" WIDE GENERAL PURPOSE BKT 950K/M 962KK/M PIN ON BUCKET 950K/M/962K/M 4.00 CYD GP BUCKET, PIN-ON BOLT ON CUTTING EDGE INCLUDED Online Owner's Manual

FOR USE WITH FUSION QUICK COUPLER GRAPPLE AREA: 1.7 M2 2.03 YD2 Online Owner's Manual OVERALL HEIGHT CLOSED-OPEN: 1620MM (64") - 2664MM (105") OVERALL LENGTH: 1981MM (78") TINE LENGTH 1372MM (54") OVERALL WIDTH: 1800MM (70"), INCL. LINES AND "TURN TO CONNECT" QDS REQUIRES: 3RD VALVE ON MACHINE

CAPACITY:UP TO 1000 TONS PER HOUR CASTING:75 FEET CUTTING HEIGHT UP TO 55 INCHES DRIVE: RUNS OFF CARRIER VEHICLE HYDRAULICS, 3700 PSI @ 50 GPM FLAT CAST: RIGHT, 135-DEGREE ROTATION TO THE LEFT FUSION INTERFACE Online Owner's Manual SIZE: 36” DIAMETER; 12” DEEP MINIMUM FAN WIDTH: 108” OR 120”

BOLT ON CUTTING EDGE NOT INCLUDED CATERPILLAR 2.9 CUBIC YARD GENERAL PURPOSE BUCKET CATERPILLAR PART NUMBER 345-2822 PIN ON LUGGING SOLD AS IS

1241 mm (48.8 in) Dual Bale Tines with IT Interface Rate Capacity (2,204 lb) Used for lifting and stacking of hay and straw bales.

CATERPILLAR ISO QUICK COUPLER CATERPILLAR PART NUMBER 545-5498 Compatible with many competitive work tools, ISO standard coupler interface is also used by Volvo. INCLUDES CONNECTING LINES KIT, QUICK COUPLER, ISO 23727 REQUIRES COUPLER READY MACHINE SOLD AS IS