Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 214 of 485
9684 Results Found
Sort By 
$ 510,000

2023 John Deere 1210G,1,575 Hours. STK#25040 $510,000

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

$ 300,000

2018 John Deere 853MH, 7,477 Hours. STK#24704 $300,000

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

$ 325,000

2017 John Deere 853M – 8,917 Hours. STK#25233 $325,00

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

$ 174,900

2012 Deere 753J Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist. New Hydraulic Pump New Oil Pan and sealed Rear Main Seals. New Sprockets , Idler, New Rear Mains, New ECM Computer, Only 11,000 Hours, HEAT AND AC in cab. Ready for the woods. Weight W/O Attachment 50,480 lb Width 10.44ft in Height 11.32ft in Length 11.67ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 395,900

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 40,000

John Deere 335C Log loader, brand new hyd pump, rebuilt engine, recent swing motor, cold A/C, saw hook ups, joystick, tight loader, no known leaks, exceptional for what it is $40,000

 Glasgow, KY
B & H Equipment
270-261-1591
Call

$ 30,000

1999 John Deere 648GII, single arch, rebuilt eng., 4wd, grapple rotates, some movement, some leaks, ready to work, $30,000

 Glasgow, KY
B & H Equipment
270-261-1591
Call

$ 69,900

1997 Deere 548G Skidder with 20,567 hours. Includes winch and blade. Weight:21,740 lbs. Length:20.77 ft Width:9.85 ft Height:9.88 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mount Pleasant, FL
NEF Equipment
855-251-2648
Call

$ 89,500

2006 John Deere 1010D, 9760hrs., supergrip bucket, preheater, blade, Tire are size 600/65-34 on front 600/55-26.5 on rear, all tires about 60%, inframe done on motor less than 100 hours ago by AIS, Deere Dealer, $89,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 179,500

2017 John Deere 1210E, 11,758 hrs., one set of tracks, 6068HT Deere power. CF772 Loader w/single squirt boom, Pre Heater, NO DEF FLUID. 2 speed travel, Tire size is 710/45-26.5 at roughly 80%, $179,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 119,500

2014 John Deere 1210E, rotating cab, Heat/AC, Nokian Forest King Tires size 710/45-26.5, all around 70%, preheater, blade, $119,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 239,500

2017 John Deere 1210G, 8767 hrs., 2 speed hydrostat trans., Nokian Forest King tires size 710/45-26.5 at roughly 85%, CF 785 crane w/squirt boom, preheater, has IBC technology, DEF, the new drive system installed, $239,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 32,900

ROPs

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

$ 62,900

2004 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE NEW CENTER PONS AND BUSHINGS BLADE PINS AND BUSHINGS

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 62,500

648GIII JD single arch skidder with winch, cold air, 28Lx26 tires, been through the shop, nice job ready skidder

 Maplesville, AL
Heart of Dixie Parts & Equipment
334-366-2778
Call

$ 80,000

MLS Number 13558644 2016 John Deere 450J LGP Dozer 2950 hours New UC

Mike Stuck
828-773-2204
Call

$ 75,000

John Deere 437E Loader with CSI 264 Ultra delimber, HYD LEG trailer, nice machine ready to work

 Maplesville, AL
Heart of Dixie Parts & Equipment
334-366-2778
Call

Call for Price

JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.

Dale Granger
800-374-5009 ext:331
Call

$ 125,000

Exceptionally clean John Deere 650 J with ripper and enclosed cab. Excellent undercarriage 3300 hours absolutely immaculate machine.

 Rocky Mount, VA
Mechanized Solutions LLC
304-494-4830
Call

$ 95,000

Ran through our shop. We addressed any repairs that we found. Skidder is tight and dry. 35.5s with SWEDA HD axles. Ready to go to work. Equipment financing and delivery available.

 Moncks Corner, SC
W & W Truck & Tractor Inc.
843-312-1018
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved