Equipment For Sale

CATERPILLAR D3K2-XL Crawler DozerSpecifications: -- Engine: C4.4 Acert Turbo Diesel Rated Net Power 80 HP @ 2,200 rpm -- Dozer Blade: 103" (6-Way) -- Fuel tank: 51.5 gal -- Operating Weight – XL: 17,544 lbs -- Hours: 3,350Equipped with: -- Cab: EROPS (Enclosed Roll-Over Protective Structure) -- A/C and Heated Cab -- Stable Blade -- Traction Control -- Work Lights -- SBG Steel TracksThis dozer is equipped to handle tough tasks with ease. We are happy to assist in the most economical delivery to your location.

LIGHTING. PRODUCT LINK. ULTRA LOW SULFUR DIESEL FUEL. ENGINE ENCLOSURES. EPA LABEL. BLADE, SINGLE ANGLE TILT. DRAWBAR. BLADE, PAT. STEER, JOYSTICK. OROPS. BLADE, S. HYD CONTROL. Additional Information CANOPY, JOYSTK STR, PAT BLD, SAT BLD, DRAWBAR, 25" PADS. CONDITION AND HOURS SUBJECT TO CHANGE. Online Owner's Manual. PLEASE CALL FOR MACHINE LOCATION

1.3YD FRONT LOADER BUCKET FOR USE WITH: 420F/F2, 430F/F2 ST, NEXT GEN 420, 420XE, 430 PIN ON

CAPACITY:UP TO 1000 TONS PER HOUR CASTING:75 FEET CUTTING HEIGHT UP TO 55 INCHES DRIVE: RUNS OFF CARRIER VEHICLE HYDRAULICS, 3700 PSI @ 50 GPM FLAT CAST: RIGHT, 135-DEGREE ROTATION TO THE LEFT FUSION INTERFACE Online Owner's Manual SIZE: 36” DIAMETER; 12” DEEP MINIMUM FAN WIDTH: 108” OR 120”

89" WIDTH BOLT ON CUTTING EDGE CATERPILLAR 1.3 CUBIC YARD MULTI PURPOSE BUCKET CATERPILLAR PART NUMBER 232-2696 FOR ALL BACKHOE MODELS EXCEOT 446 AND 450 IT LINKAGE SOLD AS IS

CATERPILLAR H55S HAMMER CATERPILLAR PART NUMBER 561-2551 HAS NOT BEEN USED INCLUDES 1 CONE TOOL AND 1 CHISEL TOOL INCLUDES 303/304 BRACKET INCLUDES CONNECTING LINES SOLD AS IS

2950 FT/LBS AUTOLUBE CHISEL BIT INSTALLED HAMMER M318F PIN LOCK BRACKET INSTALLED NEW GET NITROGEN GAS FIRED HAMMER SOLD AS IS

6000 ft/lbs impact force AUTOLUBE INCLUDES CATERPILLAR CB LINKAGE BRACKET INCLUDES PINS MOIL POINT NEW GET SOLD AS IS

CAT H160ES HAMMER COMMENTS: HAS AUTOLUBE. CONNECTING LINES INSTALLED DB BRACKET WITH PINS Online Owner's Manual REBUILT BY MILTON CAT

CATERPILLAR H160S HAMMER CATERPILLAR PART NUMBER 590-1662 HAMMER INCLUDES TB BRACKET INCLUDES AUTOLUBE INCLUDES BUCKET PINS INCLUDES CHISEL TOOL SOLD AS IS

AUTOLUBE INSTALLED CATERPILLAR H160S HAMMER CATERPILLAR PART NUMBER 590-1662 DB LINKAGE BRACKET INSTALLED INCLUDES CONNECTING LINES AND MOIL TOOL SOLD AS IS

CATERPILLAR H180S HAMMER CATERPILLAR PART NUMBER 590-1661 INCLUDES CHISEL TOOL INCLUDES CONNECTING LINES SOLD AS IS TB LINKAGE BRACKET INSTALLED

18 TEETH ARM HYDRAULICS- CUSHIONED- 32GPM/ 3770 PSI DISC DIAMETER 57IN KERF- 2 5/16 IN Online Owner's Manual SAW HYDRAULICS- 30GPM/ 4500 PSI THROAT OPENING 51.20IN TILT, PARTIAL, AND FULL- 51GPM/ 3770 PSI WIDTH- BASE 67IN. HEIGHT- 115IN. MAX CUT DIAMETER 22.50IN.

Like new, head looks good, all is tight and no noticeable leaks.

CATERPILLAR PART NUMBER 208-3659 CATERPILLAR TILTING PIN LOCK COUPLER COMPATIBLE WITH: WAINROY XLS SYSTEM BUCKETS DOES NOT INCLUDE CONNECTING LINES FOR USE WITH B LINKAGE MACHINES INCLUDES MOUNTING PINS SOLD AS IS

ALARM, BACK-UP CERTIFIED USED ELIGIBLE LIGHTS, LED M317F WHEEL EXCAVATOR Online Owner's Manual PEDAL, HPF/HAMMER SEAT COMFORT W/2" SEAT BELT SETTING, QC CTRL, PIN GRABBER SPEED 21.7 MPH STICK, 8'6'', A-LUBE TIRES, MITAS 10.00-20 DUAL UC BLADE FRONT/ OUT.REAR

CATERPILLAR M318C WHEELED EXCAVATOR w/ SCRAP MAGNETFeatures: -- (2) sets of outriggers -- 48" Magnet -- Generator onboard for magnetHours: Approx. 4,536

1.00 CYD CAPACITY CATERPILLAR 60" DITCH CLEANING BUCKET CATERPILLAR PART NUMBER 514-7639 COMPATIBLE WITH: WAINROY XLS SYSTEM COUPLERS FOR USE WITH: Pin Lock Coupler 619-9328, 619-9323 or 512-7119 INCLUDES BOLT ON CUTTING EDGE PIN LOCK LINKAGE SOLD AS IS

CATERPILLAR PART NUMBER 514-9167 CATERPILLAR PIN LOCK TILTING COUPLER COMPATIBLE WITH: WAINROY XLS SYSTEM BUCKETS Connecting Lines and Mounting Pins Not Included FOR USE WITH: 315-Linkage Machine & 514-763x and Higher P/N Pin Lock Buckets FOR USE WITH: 315-Linkage Machine & 514-763x and Higher REQUIRES: Auxilary Hydraulics SOLD AS IS