Equipment For Sale

1998 John Deere 892D-LC Excavator with 8444 hours, Thumb, The oil cooler needs some work. Weight: 65,983 lbs Length: 36.17 ft Height: 11.17 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Deere 3754 With Waratah 625 Processor, Cab has Heat and AC, Frame Hours 14,000, New Long Block with Low Hours Undercarriage is 80%,One Owner, Ready for the Woods. Weight: 101,651 lbs Length: 32 ft 4 in Width: 11 ft 0 in Height: 9 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

JOHN DEERE 85G Mid-Sized ExcavatorNeither too big nor too small, these right-size excavators are the perfect solution for a wide varietyof tasks.Specifications: -- Engine: Net Power 56.9 HP at 2,000 rpm ( (ISO 9249) 42.4 kW) -- Engine Cylinders: 4 -- Powertrain: 2-speed propel with automatic shift - Low 3.1 km/h (1.9 mph) - High 5.0 km/h (3.1 mph) - Drawbar Pull 6650 kgf (14,661 lb.) -- Swing Speed: 10.5 rpm -- Fuel Tank 31.7 gal -- Hours: 710Equipped with: -- AC and Heated Cab -- Front blade -- Multifunction, color LCD monitor -- 2-speed propel with automatic shift -- Electronic engine control -- Reduced-drift valve for boom down, arm in -- Auxiliary hydraulic valve section -- Work lights: Halogen / 1 mounted on boom / 1 mounted on frameThe 85G comes equipped with an independent-swing boom that enables work close to curbs, parallel to structures, or alongsidetraffic. We can provide financing and also the most economical delivery to your location.

2004 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE NEW CENTER PONS AND BUSHINGS BLADE PINS AND BUSHINGS

MLS Number 13558644 2016 John Deere 450J LGP Dozer 2950 hours New UC

John Deere 437E Loader with CSI 264 Ultra delimber, HYD LEG trailer, nice machine ready to work

648GIII JD single arch skidder with winch, cold air, 28Lx26 tires, been through the shop, nice job ready skidder

ROPs

2006 John Deere 1010D, 9760hrs., supergrip bucket, preheater, blade, Tire are size 600/65-34 on front 600/55-26.5 on rear, all tires about 60%, inframe done on motor less than 100 hours ago by AIS, Deere Dealer, $89,500

2017 John Deere 1210E, 11,758 hrs., one set of tracks, 6068HT Deere power. CF772 Loader w/single squirt boom, Pre Heater, NO DEF FLUID. 2 speed travel, Tire size is 710/45-26.5 at roughly 80%, $179,500

2014 John Deere 1210E, rotating cab, Heat/AC, Nokian Forest King Tires size 710/45-26.5, all around 70%, preheater, blade, $119,500

6068 POWER TECH ENGINE CRANKSHAFT TURNED RODS BEARINGS 10 MAIN BEARINGS 10 SELLING PACKAGE DEAL HEAD, CRANK, AND BLOCK $5000.00

AT208006 fan for 643J-843J cutters BRAND NEW FROM JOHN DEERE

2019 2154G John Deere processor 9,500 hours Good running condition 622B Waratah head Delivery available at buyer’s expense

648L cylinders take out 2- BOOM CYLINDERS AHC20460. $1750.00 EACH 1- BLADE CYLINDER AHC13134 low ser number only

H model grapple pins 4- AT172277 $350.00 each. 2- AT356091 $125.00 each

2016 648L SKIDDER PARTS MACHINE LOTS OF GOOD PARTS STILL AVAILIBLE ON IT CALL GAVIN @601-410-3416 OR TIM @251-366-3237 FOR MORE INFO.

Bucket And Forks 4750 Hours Recent Rebuild Eng.

2024 John Deere 2654G Processor -800 hours -Waratah 623C head -36" triple grouser pads Like New!!!!