logging Equipment For Sale

1999 John Deere 648GII, single arch, rebuilt eng., 4wd, grapple rotates, some movement, some leaks, ready to work, $30,000

2006 John Deere 1010D, 9760hrs., supergrip bucket, preheater, blade, Tire are size 600/65-34 on front 600/55-26.5 on rear, all tires about 60%, inframe done on motor less than 100 hours ago by AIS, Deere Dealer, $89,500

2017 John Deere 1210E, 11,758 hrs., one set of tracks, 6068HT Deere power. CF772 Loader w/single squirt boom, Pre Heater, NO DEF FLUID. 2 speed travel, Tire size is 710/45-26.5 at roughly 80%, $179,500

2014 John Deere 1210E, rotating cab, Heat/AC, Nokian Forest King Tires size 710/45-26.5, all around 70%, preheater, blade, $119,500

2017 John Deere 1210G, 8767 hrs., 2 speed hydrostat trans., Nokian Forest King tires size 710/45-26.5 at roughly 85%, CF 785 crane w/squirt boom, preheater, has IBC technology, DEF, the new drive system installed, $239,500

very nice job ready machine!, live heel, rotobec grapple, rear entrance cab!

John Deere 437E Loader with CSI 264 Ultra delimber, HYD LEG trailer, nice machine ready to work

2004 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE NEW CENTER PONS AND BUSHINGS BLADE PINS AND BUSHINGS

648GIII JD single arch skidder with winch, cold air, 28Lx26 tires, been through the shop, nice job ready skidder

SEVERAL JD 648E PARTS

ARTICULATION DRIVESHAFT TRANS TO PARK BRAKE SN#-685564 1-AT409576 $1250

2013 Deere 3754 With Waratah 625 Processor, Cab has Heat and AC, Frame Hours 14,000, New Long Block with Low Hours Undercarriage is 80%,One Owner, Ready for the Woods. Weight: 101,651 lbs Length: 32 ft 4 in Width: 11 ft 0 in Height: 9 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 John Deere 640L2 -3100 hours -Tires are good -Tire chains are good -Cable in good shape -Blade extension

2014 John Deere 1910 -Complete Deere engine has 13,000 hrs -27,000 frame hours -Pumps have 7,000 hrs -Drive motor has 7,000 hrs -New Deere transmission has 7000hrs -Slew bearing and brass has 9000hrs -All cylinders except for one steer cylinder replaced in the last 5000hrs -Extension boom replaced and bucket replaced -Newer front window -A/C and heat work good -7 new Nokian tires in the last 4500hrs tires range from 80-99% -Boogies diffs and planetaries drain clean

2004 Deere 548G-3 Grapple Skidder, Has Winch, 14,700 Hours, Well Maintained, Tires are 28L x 26, Good Tread, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 23,690 lb Overall Length 20.77in Overall Width 9.51ft in Height To Top Of Cab 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 John Deere 548G3 -12k hours -New glass -Tires have less than 500 hours -Tight and dry -Has a set of good chains -Have a brand-new set will sell for an additional Cost Turn-key Unit!!!!

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 John Deere 648LII Grapple Skidder, Dual Arch, Winch, 4000 Hours, 28L X 26 Tires

John Deere 648G single arch. Arch and grapple available together or separate off of operational machine.