logging Equipment For Sale

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This 335C John Deere knuckle boon loader operates as it should no problems that we’re aware of. It has 20,965.6 hours on it. It would need some work to be confident in it in the woods but on the yard it’s always done good. If interested in this machine call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493 The machine is being sold from State Line, Mississippi, 39362, 467 St Peter St

2012 John Deere 753J -10717 hours -Brand new sprockets and idlers -New ecm -Oil pan gasket replaced and rear main seal -New Hydraulic pump no hours on it -21" Quadco 360 head

2015 John Deere 648H -10,500 hours -Tires are 90 percent -All 4 tire chains are new 3/4 single diamond -Tight and dry

2013 John Deere 437D -11,900 hours -Bucksaw is a 2016 is like new -Just replaced the turbo -Delimber works good with topping saw -Hydraulic landing gear

Very low hours, brand new steps, everything works very well. Ready for somebody to work it. If interested in this machine call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796

Great machine, fairly used,unit is tight and dry

2013 Deere 3754 With Waratah 625 Processor, Cab has Heat and AC, Frame Hours 14,000, New Long Block with Low Hours Undercarriage is 80%,One Owner, Ready for the Woods. Weight: 101,651 lbs Length: 32 ft 4 in Width: 11 ft 0 in Height: 9 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Deere 1910E Forwarder, Strong Engine, Has 27,000 Frame Hours, Motor Replaced at 13,000 Hours, Pumps at 7,000 Hours, Drive Motors replaced at 7,000 Hours for Preventative Measures, Slew Bearings and Brass replaced at 9,000 Hours, All Cylinders except Steering Cylinders Replaced at 5,000 Hours ago, Extension Boom and Bucket Replaced Newer Front Window Replaced, New Bucket, Good AC and Heat in Cab.7 New Nokian Tires Replaced the last 4.500 Hours, Boggies, Differential and Planetaries drain clean. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 John Deere 548G3 -12k hours -New glass -Tires have less than 500 hours -Tight and dry -Has a set of good chains -Have a brand-new set will sell for an additional Cost Turn-key Unit!!!!

2007 John Deere 2054 Harvester with Waratah 622B Head, 17,768 hours, Recent pump, Recent sprocket and rails, New Waratah computer, runs great. Weight 69,187 lbs Length 45 ft 0 in Width 11 ft 10 in Height 10 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 John Deere 640L2 -3100 hours -Tires are good -Tire chains are good -Cable in good shape -Blade extension

2014 John Deere 1910 -Complete Deere engine has 13,000 hrs -27,000 frame hours -Pumps have 7,000 hrs -Drive motor has 7,000 hrs -New Deere transmission has 7000hrs -Slew bearing and brass has 9000hrs -All cylinders except for one steer cylinder replaced in the last 5000hrs -Extension boom replaced and bucket replaced -Newer front window -A/C and heat work good -7 new Nokian tires in the last 4500hrs tires range from 80-99% -Boogies diffs and planetaries drain clean

Good condition, no leaks and operated properly when removed. very minor pin wear.

John Deere Logging Outfit 2020 748LII (4600 hours, dual arch, winch) 2020 843L (2900 hours) 2019 437E (6800 hours, delimber) 2019 650K (3400 hours) Call for full details

2018 John Deere 748L Dual arch Winch 7600 hours 30.5 tires (Rears 75%, Fronts 50%) Center is tight Boom cylinders repacked Steering cylinders tight Currently on the job using daily

1994 John Deere 653E Processor, Machine has 19,500 Hours, New Deere installed at $15,000 Hours, Undercarriage is 65-70%, Enclosed Cab with Heat, AC doesn't work, Has some hydraulic leaks Has a Prentice PF48 Processor Head, Like a Fabtek Head. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

SEVERAL 648/748 GIIIs AVAILABLE