Equipment For Sale

2011 Tigercat 620D -18000 frame hours -5000 hours on 6.7 reman engine -Winch -35.5 tires 3 are new one is 30% -Tight and dry

2011 Tigercat 234 Log Loader -14000 frame hours -4500 hours on reman engine -1500 hrs on swing bearing and turn motor -264 ultra -Big john hydraulic leg trailer

2013 Tigercat 620D -13600 hours -New hydrostats and pumps 14 months ago -44x73 tires -Tight and dry -Winch

2017 Tigercat 234B -12170 hours -New crate motor 1000 hours -New hydraulic pump 1500 hours -Def deleted -Ground saw -Csi 264 delimber -New bucket jaws -New bucket cylinders One Owner

2018 Tigercat 720G -6789 hours -5600 head -Disk @50% -Tight and dry -Tires @50% -One owner

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 TigerCat 845C -14000+hours -Uc 50% -5702 360 head -Disk in good shape -Woods ready

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TC 5702 Sawhead, 110-degree wrist. 36” tri trac New teeth, serviced and dried up.

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Tigercat 1185, 4353 hrs., TC FPT N67 Tier 4F Engine, rated at (230 KW) 308hp, Tigercat Extreme Duty pump drive, trans., and hydraulically balanced bogie axles, $395,000

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

2019 TIGERCAT H822D Harvester – Processor 9,761Hours H822D -Model Serial Number- 82233488 New Motor 28" single grouser pads Tigercat 575 head, 3/4" bar Clean straight unit! Delivery is available at the buyer’s expense