Equipment For Sale

2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 TigerCat 845C -14000+hours -Uc 50% -5702 360 head -Disk in good shape -Woods ready

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

TC 5702 Sawhead, 110-degree wrist. 36” tri trac New teeth, serviced and dried up.

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

9500 hours EHS transmission 45/78x32 front tires at 80% Dueling Rings 28x26 Rear Tires With 23.1x26 Duals At 80% Joystick Steering Rotating Seat Clock Heater Fuel Fired Pre-Heater Led Light Package Clean One Owner Machine Blade- Yes Chains- Yes Machine Is Ready for The Woods.

2017 TIGERCAT 620E DUAL ARCH GRAPPLE WINCH SKIDDER 6 CYL CUMMINS JOYSTICK STEER

6k hours on engine, Dual Arch, Bogie, extended range fuel tank, 35.5 and 44’s

2019 Tigercat 234b -9k frame hours -150 hours on motor and Hydraulic pump with warranty from Tigercat dealer -Packed both boom cylinders -Tight and dry Grapple -Straight fenders 80% tires Needs absolutely nothing !!!!!! Comes with 2018 CSI 18' Ground Saw!!!! or machine alone is 150k!!

2021 Tigercat 890 Shovel -5600 hours -72” Tmar grapples with about 2000 hours on them -28inch double grouser -Sprockets and rollers are @ 75% -Rails and pads brand new -Serviced regularly every 250 hours -Greased daily

2015 Tigercat H855C - 20,242 Carrier Hours - 1,600hrs on engine (Warranty till August 2025) - 1,600hrs on Pumps - Original Chains and Pads, Approximately 75% - New Sprockets - Plumbed for Logmax Head - Single Operator Single Shifted

2020 Tigercat 724g -6115 hours -Tigercat 5600 head -Disk is in good shape -30.5 32 tires 75% tread -Tight and dry -Clean machine.

2017 Tigercat LX830D Feller Buncher -8,800 hours -330 hp Tigercat FPT C87 engine -No DEF -10 roller long track undercarriage is at 40% -23” hot saw head with 360 rotate -Wabasto pre-heater ONE OWNER MACHINE!!!!

2018 Tigercat 720G -6789 hours -5600 head -Disk @50% -Tight and dry -Tires @50% -One owner