Equipment For Sale

Komatsu 400 series Feller buncher Final Dr. in excellent condition all inclusive

Valmet/Komatsu fellerbuncher footpedals sold separately or as one complete unit. Very good condition.

2021 KOMATSU XT430-5 FELLER BUNCHER 4,400 HOURS QUADCO HEAD GOOD UNDERCARRIAGE CUMMINS QSL9 ENGINE 70,000 LB OPERATING WEIGHT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Komatsu D-335 Dozer -3712 original hours -Single tilt cylinder -Engine rebuilt and runs great -Undercarriage is 75% -Ready to go to work

2013 Komatsu 865 8WD Forwarder, Tracks All Around. Good running Machine.

Machine will have a hot saw on it for the sale.

Cab w/ AC, Drawbar, Low Ground Pressure, Smart Grade

2020 Komatsu XT430-5 -9000 hours -Logmax 7000XT -UC 70% -Tight and dry -Downsizing ready to work

2019 Komatsu 138 Excavator, 3500 Hours, Hydraulic Thumb

KOMATSU D61PX-24 Crawler DozerProven, second generation D61PX-24 comes standard with a parallel link undercarriage system for long undercarriage life. In addition to E and P modes, a new H mode helps operators maintain ground speed while operating under heavy loads. Specifications: -- Engine: Komatsu SAA6D107E-3 Gross 127 kW 170 HP 2200 RPM -- Travel Speed: - 1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph - 2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph - 3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph -- Number of track rollers (each side): 8 -- Fuel tank: 372 ltr 98.3 U.S. gal -- Weight: 18320 kg 40,389 lbs -- Hours:5200,Equipped with: -- Cab integrated ROPS (ISO 3471) High rigidity and superb sealing -- Hydrostatic Transmission (HST) control system -- PAT Dozer with Adjustable Pitch -- Comfortable Ride with Heated Operator Seat -- Cab Damper Mounting -- Parallel Link Undercarriage System (PLUS) -- Self-adjusting idler support -- Palm Command Control System (PCCS) Levers -- One-Pedal Design (Decelerator/Brake Pedal) Controls Speed, During Operation -- Selectable Working Mode -- Heavy-Duty High-Pressure Common Rail (HPCR) Fuel Injection System -- Komatsu’s New Emission Regulations-Compliant EngineNew parts: Brand new radiator Brand new chains, upper and lower rollers, and new pads. We can provide financing and also assist in the delivery to your location.

2015 Komatsu 895 Fowarder -18,300 hours -Tight and dry -780/50-28.5 tires 70% -Tracks are 30%. -Spare tire no rim

2021 Komatsu WA270-8 Wheel Loader, Equipped with108" Bucket, Engine Has Original Hours of 6900, Quick Attach, Ride Control Enclosed Cab with Heat and Air Conditioning, Ride Control, Brand New Turbo. Ready for Work. Operating weight: 28,208–29,079 lbs Length: 24 ft 6 in Width: 8 ft 3 in Height: 10 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Komatsu WA 200 Wheel Loader, 500 hrs, Komatsu care till 1500 hrs, JRB quick attach 3 yard bucket. Operating Weight 23,259 lb Length With Bucket On Ground 22.58ft in Width Over Tires 8.08ft in Height To Top Of Cab 10.42ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Komatsu WA 270 Hi Lift Wheel Loader with 1,256 hours, Komatsu care till 1500 hrs quick attach 3 yard JRB bucket. Operating weight 28,462 lb Overall height, ROPS cab 10'6" Overall length (bucket on ground) 25'5" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Komatsu XT465L-5, 3,031 hrs., Cummins QSL9, late model Quadco 3200 360° head, 10” x 28 long single grouser pads 100%, Rollers, Sprockets, Idlers and Bushings all @ 80%, Fire suppression System, Back Up Camera, $399,500

Polycarbonate windows for Komatsu 911.3 and 911.4 harvester. 1/2" thick abrasion resistant polycarbonate. Available in tint and clear. Check measurements to make sure you are ordering the correct window. The measurements above are the major dimensions, (widest and tallest points only). Call us Today at 715.560.3929

2015 Komatsu PC 170 LC Excavator 2700 hours Second owner Manual thumb Auxiliary hydraulics 30"bucket Backup camera Work ready

2001 komatsu D39PX 5500 hours Winch Forestry package New rebuilt final drives 80% on tracks Runs great

2015 Komatsu 430-3 Waratah -9600 hours -616C Head -Under Carriage done this spring -Hydraulic Oil cooler and reversing fan recently replaced Good working Machine!!!!!!

KOMO MHS AUTOMATIC VACUUM PANEL FEEDER: -- Specifications: Single vacuum Infeed & Rake-Off system for Nested Based CNC Router operation.Designed for loading of a 5' x 10' (61" x 128") panel cap. CNC Router and can handle material up to that size; Load/Rake cycle time is approx. (25) Seconds. -- Operating Process:A fully Automatic sheet Feeder and Unloader. Designed for a single bunk application and the ability to load from 3 sides.As it moves the sheet over the router table the previously nested parts are pushed onto a conveyor or sorting table, the dust is cleaned from the router table by the dust collection on the front of the gantry and the new sheet is Squared up on the router table.Full Bunk of material is loaded into staging area constructed of tubular steel with cross-support and safety guides to properly position bunk, preventing damage by Forklift operator to loader base.Loading is performed via a vacuum cup system with (4) rows of adjustable vacuum cups, (2) cups per row; front-to-back spacing is fixed and cups are adjustable left-to-right.Material is picked up from the top of the stack and loaded onto the router table, pusher arms at front & right side square the material onto the table.After machining, the vacuum lift picks up another sheet for processing; as it brings it over the side, squaring arm rakes the processed panel and skeleton onto a side table. PLEASE NOTE: This unit will need to be integrated with the controller of your current CNC Router. Actual Model is KOMO MHS.