Select For Sale

1993 Timbco 425 with Rolly-II Processor Head, 37" Bar Saw, New Air Bag in Head, Cummins 8.3 Diesel , Hours reading 6,769, Leveling Cab, Enclosed Cab with Heat and AC, Propac Heater, New Computer Sensor for Measurements ,No Oil Leaks or Engine Blow By , Final Drives Done Recently. Ready for the Woods... Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Timbco 415 Processor, Logmax 7000 Processor Head, Machine Isuzu Engine and has 6000 Hours3.5 Gallons/per hour, Undercarriage is 50%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 96,672.8 lbs Height - Top of Cab 10.7 ft Shipping Length - non tilt 13.5 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Timbco 425B 2005 Log Max processor head 22" capacity John Deere 6068 motor with 600 hours on it UC is good 9786 hours Runs and operates good

Timbco and Komatsu Main Booms for EXL and FXL, cleaned and Painted.

Timbco 415 lower car body, very low hours, excellent tracks, GFT 50 finals, drive motors.

Location: ALLENWOOD, PA

Timbco Bar Saw Head for Wheeled Machines $4000

Several nice used seats for Timbco?Valmet Tracked Bunchers

Excellent severe duty tracks for Timbco 445 or TimberPro 735

2002 Timbco 425 Feller Buncher, Equipped with a Quadco 20" Fixed Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, New Final Drives, UC is 80-85%, Cummins 8.3 Diesel with 11000 Hours, New Windshield, Ready for the Woods. Weight 55,235 lbs Height 12 ft 2 in Width 9 ft 8 in Length 21 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

Low hour Tracks for 425 Timbco or 725 Timberpro, 28” Pads

2003 Timbco 425D with Logmax 7000 Processor Head, Enclosed Cab with Heat, Air is starting to go, Cummins 8.3 Engine, Unknown Hours, Undercarriage is around 75% Ready to Work. Length: 21 ft 4 in Width: 9 ft 8 in Height: 12 ft 2 in Weight: 55,235 lbs.

1994 Timbco 425B Processor, Machine has Log Max 5000 Head, 15,000 Hours, Undercarriage is 50%, 404 Chain Pitch, Enclosed Cab with Heat Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 445EXL Feller Buncher, Equipped with a Quadco 22" 360 Wrist Saw, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Good Undercarriage 70%, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 425 bottom rollers, have single flange and double flange, (75) available

Timbco 33" Bar Saw, Like New with a Heavy Duty Waratah 360 Rotate

Timbco Bar Saw w/ 360 Rotation

2021 Timber Buddy Mill Operation Comparable to a Wood-Mizer LT70 Kauffman's laser edger 2 strand log deck like new Roller transfer deck like new

Timber Treatment Solutions impregnation plants can all be fitted with one of our automated timber handling systems. An automated wood handling and storage system is the best option for treating large volumes of timber in a short space of time due to minimising charge changeover times. This makes annual impregnation volumes of over 100,000m3 on a single plant easily achievable. The automated handling system can consist of anything from a transfer car which changes over one charge automatically to a multi-lane multi-level fully automatic system which only requires operator input once per day. Timber Treatment Solutions are the only manufacturer able to offer the patent pending multi-level timber handling and storage system, which can half or even third the building space required for an automated wood package handling system. There are lots of possible configurations and our teams will be able to advise the most suitable for you, according to your needs and budget.