Equipment For Sale

Bandit 2650 Wheeled Stump Grinder, Remote Control, Good Running One Owner Trade In.

2007 Bandit 1590 18” Drum Chipper, 140hp John Deere with 5000 hours, Winch, Telescoping tongue, Cone holder, Hand crank turn and height adjustable discharge, Lift cylinder, Auto Feed, New engine harness, Just serviced and tires, One owner in very good condition ready to work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 3680 Beast Recycler, Cat C18 with 3088 hours, Radio remote, Magnetic head pulley, Pintail hitch, Tri Axle. Length: 44’ Width:10' 10" Height:13' 6" Weight: 62,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Bandit 4680T Beast Recycler, Cat C32 1200 hp with 2582 hours, New Mill, New augers, New screen and gate, Radio remote, Magnetic head pulley. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 4680T Beast Recycler, Cat C27 1050hp, New gate and screen, New belly and discharge belts, Radio, remote, Magnetic head pulley. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 4680T Beast Recycler, Cat C27 1050hp, 250 hours on reman engine, New auger bearings, New anvil, New gate, New belly, and discharge belt, New Cutter bodies, Radio remote, Magnetic head pulley, Air compressor. Weight: 92,000lb Length:624 in Width:139 in Height:162 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit 150 Chipper 7300 hours Deutz intercooled engine No blow by New teeth New drum bearings New springs Good tires Work ready REDUCED

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1850 Whole Tree Chipper Deere 325HP Turbo Engine, Engine had a complete engine rebuild 500 Hours Ago, 360 Degree Grapple Rotation, Heat and Ac in Cab Ac is not hooked up, ONLY 6,100 Original Hours, Joystick Controls. Length 282” Width 102” Height 156” Weight 20,000 lbs.

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

2010 horizontal grinder/chipper mobile track 2800 hours New twin Disc clutch New conveyor New 3 stage pump New cutter mill drive belts Currently mill is converted to chip knives Have all cutterbodies, teeth, screens and gate to convert to grinding.

New Simmonds Blades included. John Deer 4045TF150 engine. Hours unknown. Engine is clean and runs well.

2023 Bandit 2590T Beast -160 hours -Gold warranty -Fully loaded -On tracks

2017 Bandit 3090 Track Chipper -560 hours -800 hp -Like new Turn key chipper

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Bandit 255 Brush Chipper, Equipped with a Caterpillar 142 HP Turbo Diesel with 2500 Hours, Hydraulic Winch, Hydraulic Lift Cylinder, Autofeed System, Hand Crank Height and Swivel Chute, Ready for Work Length: 14' 4" Width: 7' 6" Height: 8' 9" Weight: 12,250 lbs (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Bandit 3680 Horizontal Grinder, Cat H18 Engine, Wireless Remote Autofeed System, Fold Up Track. Needs Radio Remote. Not ready to grind, missing parts. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 250XP Chipper, Engine Meter is tough to read, Runs Solid, Hydraulic Winch, Telescoping Hitch, Autofeed, Caterpillar 140 HP Engine, Live Hydraulics, Hydraulic Lift Cylinder, Hand Crank Height Chute, Aluminum Tool and Battery Boxes, Electric Brakes. Length: 18’ 6” Width: 7’ 1” Height: 8’ 6” Weight: 7,200 - 7,800 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Brush Bandit 15XP Chipper, Equipped with a Vortex V-6 Gasoline Engine, with 3,200 Hours, Autofeed System, Hydraulic Winch, Lift Cylinder, Hand Crank Swivel Chute and Height Adjustment, Ready for Work. Length:15’ 7” Width: 6’ 6” Height 8’ 8” Weight: 8,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.