Equipment For Sale

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access. -- Power safety electrical breaker box included. Please NOTE: No blade guard.

16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

Runs good and is still in operation Hooked up to 460 Table Extension has been repaired Main table has almost zero wear on it.

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYOR 16-Section Clamp Carrier 20.5' width cap., (7) clamps per section (128 clamps total). .48" max. clamp opening clamps with 4-1/2" X 3 1/4" jaw height (128) Rocker plates 4" X 6" @ 80-1706 (purchase in June 2024)Complete with: -- Semi-automatic clamp tightening, -- (2) Air drive carrier rotation. -- (2) Pneumatic panel flattener -- OAL approx. 24' X 14' X 12'Note: The buyer will be responsible for tear down and loadingMachine model CC 20,5-16-481

Capacity: 50,000 lbs @ 50in LC. Hours: 10,727. Mast: Two-stage ultraview mast (197"/216"). Forks: 100" (3.3" x 14" x 100") Attachment: Side Shift and Fork Positioner. Engine: Cummins QSL9 TIER 4F. Dana TE-17 3-Speed powershift Transmission. Call for delivered price.

Capacity: 100,000 lbs @ 48" LC. Hours: 18,953 hours. Cummins QSX15-C400HP Tier III TPEM Electronic Turbocharged w/fuel cooler. Powershift Transmission - 4 speed w/Declutch. Modulated, Electric Shift Control and APC-120 with push button transmission shifting on joystick mounted on the right side of the seat. Rigid Ultra-VU 24, 97" Log Clamp Carriage with Kickers and 108" Forks. Note: Good Running conditions and ready to work. Call for delivered price.

Capacity: 80,000 lbs @ 48" LC. Hours: 13,200 hours. Tires: Pneumatic tires. Fuel: Diesel. Mast: 216" two-stage mast. Forks: 8 ft forks. Attachment: Side Shift and Fork Positioner. Notes: New paint. Call for delivered price.

Capacity: 36,000 lbs @ 48" LC. Mast: 18 ft mast. Forks: 8ft. Tires: Solid Pneumatic. Engine: Cummins Diesel. Attachment: Side shift, fork positioner. Hours: 10,500 and 12,700. Great Shape. Call for delivered price.

(3 units). Capacity: 18.000 lbs. Mast: 112" / 132" Two-stage mast. Tires: Solid Pneumatic. Hours: 9.087, 13.629 and 11.359 Attachment: Side Shift, Fork positioner. Engine: Diesel. Notes: Full Cab with A/C and heat. Call for delivered price

Taylor Forklift tight machine

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

Taylor Forklift, runs & works good

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

JLT Clamp - 713A-8-LCS: (8) Section Large Capacity Door ProLarge capacity 8-section Rotary Door Clamp for the medium to large cabinet shop. Produce up to (400+) cabinet doors per day. -- Each section includes: 38" x 96" Max. clamping capacity with: 2-1/2" High jaws; (4) vertical clamps; (2) horizontal clamps. -- Clamp & square multiple cabinet doors with vertical center rail: (2) 38″ x 45″ Doors side by side Double Door Clamping. -- Includes: Heavy-Duty; pneumatic drive for rotation; pneumatic clamping; squaring assembly.Actual model: # 713A-8S-129W-68H-80D-NS-M-LC-L-M2

TAYLOR - 6-Section: Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36) total clamps; 30" opening on clamps; 3-1/2" high jaws; includes: Pneumatic rotation; tightening; panel flattening. -- Overall assembled dimensions: 9-1/2' Deep x 13-1/2' wide x 9' tall.NOTE: Teardown not included.

MLS Number 13417095 2016 Taylor TN520S Forklift 12794 hours 52,000 pounds capacity 75,330 chassis weight 60" forks 164" lowered height 106" max fork height Pneumatic tires 90% Diesel