Equipment For Sale

OLIVER 4470 25" Straight Knife Planer Full 24" of cutting width, over 9" of cutting capacity, and the ability to take up to 1/4" off in a single pass through the 4-knife standard cutter head, this planer will take whatever you can dish out. -- The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn't everything, this OLIVER outputs stock that's true and straight. -- A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. -- And a powerful 10 HP motor Single Phase motor, or 15 HP 3-Phase motor. --OPTIONAL EQUIPMENT: Byrd Shelix Cutterhead (ADD $2,400)

OLIVER 4705 SHAPER 5 HP, Sigle phase or 7.5 HP, 3-PhSpecifications and Features: -- Massive cast iron precision ground table provides a solid work surface. -- Cast iron base provides a steady platform. -- 3/4"; and 1-1/4"; interchangeable spindles are included for added versatility. -- Three spindle speeds allow more choices to produce a better finish. -- Reversing spindle gives more options for each set-up. -- Innovative dovetail design accurately raises and lowers the spindle. -- Fence is independent and features micro adjustments for quick set-up. -- Top mounted control panel includes a digital readout for spindle height. -- Large hand wheel for quick spindle height adjustment. -- Magnetic controls with emergency off switch for safer operation. -- Includes miter gauge. -- Spindle Speeds: 5,000, 7,000 and 10,000 RPM. -- Maximum Tool Diameter: 7"; Below Table, 8"; Above Table. -- Spindle Diameter: 1-1/4"; and 3/4"; Interchangeable. -- Vertical Spindle Travel: 4". -- Table Height: 36-1/2". T-Slot: 3/4" x 3/8". -- Dust Port Diameter: 4". -- 800 CFM min. -- Optional collet for router bits available special order --[1/2" Spindle for Models 4705 & 10047 Shaper]1/2" Spindle for Models 4705 & 10047 Shaper$89.99Model 10047[3/4" Spindle for Models 4705 & 10047 Shaper]3/4" Spindle for Models 4705 & 10047 Shaper$89.99Model 10047[1" Spindle for Model 4705 Shaper]1" Spindle for Model 4705 Shaper$99.99Model 4705[1/4" Collet for Models 4705 & 10047 Shaper]1/4" Collet for Models 4705 & 10047 Shaper$69.99Model 4705[1/2" Collet for Models 4705 & 10047 Shaper]1/2" Collet for Models 4705 & 10047 Shaper$59.99Model 4705[1-1/4" Spindle for Model 4705 Shaper]1-1/4" Spindle for Model 4705 Shaper$99.99Model 4705 prices may vary.

OLIVER 4045 12" PROFESSIONAL TABLE SAW, with 36" FenceHeavy-duty cast iron table precision ground for accuracy; rugged machine frame construction provides maximum stability and reduced vibration.Specifications: -- 12" Blade capacity and 0° - 45° tilting arbor with digital read-out. -- 7.5 HP Motor at 3,450 RPM. -- Complete with: 52" rip fence capacity that will handle most of your work. -- 48" x 52" Cast iron table. -- Blade guard, miter gauge, push-button controls. -- Parts list & operation manual.

OLIVER 4016 10" Table Saw, 5 HP, 3-Ph w/36" Rail Specifications: -- 5 HP motor; poly V-belt drive system with belts that run smoother and with less vibration, giving you the highest quality cut available. -- Top it all off with with OLIVER'S Optimus square tube fence and a digital blade angle readout system and you've got a saw that tears it up with accuracy and in style! -- Model 4016.004 5 HP, 220V. 3-Phase.

OLIVER 6910 Oscillating Spindle SanderPedestal style Spindle Sander constructed for rugged use .Specifications: -- 2 HP Motor drives and is connected through a flexible coupling, and can be installed or removed without disturbing the drive mechanism. -- Spindle speed 1,725 RPM, Oscillation speed 75 Cy/Min with 1-1/2" stroke length. -- Spindle quill runs in precision ball bearings, oscillated by a heavy duty worm & gear mechanism running in a bath of oil. -- (10) Spindle sizes provided: 1/4 x 5", 3/8 x 6", 1/2 x 6", 5/8 x 6", 3/4 x 9", 1 x 9", 1 1/2 x 9", 2 x 9", 3 x 9" and 4 x 9"; 100 grit abrasive sanding sleeve with each spindle. -- Large 24" x 24" precision ground cast iron table mounted on large trunnions that can be tilted 45° down and 30° up by use of a convenient handwheel. -- Complete with: Pedestal style stand.

Front/rear trim Top/bottom trim Top/bottom bevel Moulding Edgesanding

OMAB GRU-100 (BACCI Style) 4-Spindle Copy Lathe/ShaperSpecifications: -- Capacity: (4) Spindle duplicating/carving/copy heads with (4) copy belt sanders for asymmetrical parts. Max. working height: 6.5" (165 mm), max length capacity 39.4" (1000 mm). -- Speeds: (3) Carriage speeds: 3 IPM (75 mm/Min)_up to 7.87 IPM (200 mm/Min). Spindle speeds: 25 minimum to 42 maximum RPM. Features: -- Carriage feed motor 1.8 HP. Cutter drive motor 2.2 KW (3.9 HP). Bell cutters 1.38" (35 mm), Minimum working radius 0.71" (18 mm). -- Comes with: Installed cup-style cutters. -- NOTE: Larger diameters are possible by using every second carriage position, i.e. (2) heads instead of four heads. -- Dimensions approx 94" long x 37" wide x 78" High . Weight about 2400 lbs NOTE: Specifications are from similar BACCI lathes and need to be verified prior to purchase.

OMAL INSERT 900 CNC Bore, Glue & Dowel Inserter, Never UsedNOTE: Machine control is currently not operational; Seller believes it is its battery.Specifications: -- Capacities: X-Axis 900 mm (35.44"), Y-Axis 40 mm (1.57") Stroke, Z-Axis 10 - 40 mm (0.39" - 1.57") Thickness. -- Table size 15-5/8"; x 49"; x 35"; H, (4) Working zones: (2) 450 mm (17.72") W. -- Max. dowel size 8 mm Dia. x 30 mm L (0.31" dia. x 1.18" L). -- Max. dowel projection 15 mm (0.59"). -- Spindle speed 6,000 RPM. -- Cycle time 0.8 Sec.Equipped with: -- (4) 2-1/4" Dia. Pneumatic hold-downs. -- (1) Horizontal drilling unit, with: 3/4 HP - 3,380 RPM TEFC Motor, (1) Glue injection unit & (1) Dowel insertion unit. -- PC-Based controller, with 12" Display, (2) Foot pedal controls.Complete with: -- BROVIND VIBRATORI "OB 300 DC" 14" Dia. x 5-1/2"; D Vibratory Bowl Feeder, with "NC-02M-50 DC" Variable Speed Controller. -- (1) 8 L Cap. High Pressure Glue Tank, (1) 8 L Cap. Water Tank. -- METROLOGIC "VOYAGER CG MS9540" Handheld Bar Code Reader.

OMAL INSERT 900 CNC BORE, GLUE & DOWEL INSERTERSpecifications: -- Capacities: X-Axis 900 mm (35.44"); Y-Axis 40 mm (1.57") stroke; Z-Axis 10 - 40 mm (0.39" - 1.57") thickness. -- Table size; 15-5/8"; x 49"; x 35"; H; (4) working zones: (2) 450 mm (17.72") W. -- Max. dowel size: 8 mm Dia. x 30 mm L (0.31" dia. x 1.18" L). -- Max. dowel projection: 15 mm (0.59"). -- Spindle speed: 6,000 RPM. -- Cycle time: 0.8 Sec.Equipped with: -- (4) 2-1/4" Dia. pneumatic hold-downs. -- (1) Horizontal drilling unit with: 3/4 HP - 3,380 RPM TEFC Motor; (1) glue injection unit & (1) dowel insertion unit. -- PC-Based controller with: 12" Display; (2) foot pedal controls.Complete with: -- BROVIND VIBRATORI "OB 300 DC": 14" Dia. x 5-1/2"; D vibratory Bowl Feeder with: "NC-02M-50 DC" Variable Speed Controller. -- (1) 8 L Cap. High Pressure Glue Tank; (1) 8 L Cap. Water Tank.

OMAL VELOX 1300 CNC BORE, GLUE & DOWEL INSERTER + Optional LASER MEASURING DEVICE SpecificationsPLC Controlled automatic step-by-step boring, glue injection, & dowel insertion into panel components, drawer parts, chair pieces, etc. at random spacing. Features"Optional" Auto Laser measuring device with: Parametric Control and Touchscreen PLC Control. Working Capacity51" (1,300 mm) In "X" Axis work area; 1.57" "Y" Axis stroke with manual depth setting; 1.57" "Z" Axis stroke with manual vertical settings. -- 10 mm to 30 mm (0.39" - 1.18") Material thickness capacity in the "Z" axis. -- Machine is currently set up for 8 mm dia. x 30 mm long max. dowel dimension.Work Areas(2) Loading zones with: Cycle time of (1) second for each bore, glue and dowel insertion when holes are on 32 mm intervals. -- Equipped with: Brushless motor; ball nut and ball screw for quick positioning.Dowel InserterOMAL "SURE SHOT" Revolver system guarantees a dowel is inserted every time. (1) Dowel insertion unit with: 8 mm Diameter dowel capacity -- Standard dowel dimension: 8 mm x 35 mm; Maximum dowel length: 40 mm; Maximum dowel projection: 14 mm.Operator InterfaceTouchscreen Control for writing and storing programs & is programmable in the "X" Axis. -- Graphics programming 2.5D with: Simultaneous working display; Automatic Mirror Image (left & right) programming; Parametric programming; Graphical aid.Internal self-diagnosis; Historical report of alarms, Complete with:(2) Working zones, (1) horizontal drilling unit, (1) gluing, (1) dowel insertion unit.(1) 8-Liter cap. high pressure Glue Tank, (1) 8-liter cap. Water Tank (for cleaning), (1) Vibratory Dowel Hopper, (4) pneumatic Holddown Clamps, Dual foot Pedal controls. -- Actual Model is: OMAL VELOX 1300

Single horizontal drill and dowel; 1300 mm work table with four fields; sure shot revolver system to guarantee the fastest cycle time, average one second, and extreme reliability; simple user friendly touch screen; heavy duty steel frame for maximum rigidity; large phenolic table with robust clamps suitable also for delicate materials; barcoding and ethernet ready; laser for measuring the part and populate the program;

OMAL HBD 2500 CNC BORE, GLUE & DOWEL INSERTER: Specifications: -- NC Controlled, automatic step-by-step boring, glue injection & dowel insertion into panel components: Drawer parts, chair pieces, etc. at random spacing or automatic hole-spacing with simple what-if statement: i.e. parametric programming.Working Capacity: -- 2,500 mm (98.4") In the X-axis; 30 mm (1-1/4") stroke in the Y-axis; 10 mm - 40 mm (0.39" - 1.57") thickness capacity in the Z-axis. (4) Working zones: Center fence and both side fences dropdown for 2- or large 1-zone operation.Tool Plate Configuration: -- X-Axis rack & pinion drive CNC Controlled; carriage speed of 90 MPM (295 FPM); Y- & Z-axis: Manual ball screw with digital indicators.Equipped with: -- (1) Horizontal drilling unit with: 3/4 HP - 6,000 RPM Motor; (1) gluing & (1) dowel insertion unit.Control System: -- PC Numerical Control operating system; Windows/XP, color video flat screen monitor; 40 GB hard drive; keyboard & mouse. -- Graphic operator inter-phase, parametric programming standard; OMAL patented "SURE SHOT" Revolver System with fiber optic sensor to guaranty reliable dowel presence & insertion.Complete with: -- (1) 18-Liter (4-3/4 Gallon) cap.; high pressure glue tank. -- (1) 18-Liter (4-3/4 Gallon) cap.; water tank (for cleaning). -- (1) Vibratory Dowel Hopper, (6) pneumatic hold-down clamps; machine is setup for 8 mm dowels.

Omef Log Splitter SPT620, Log splitter for excavator from 5 up to 12 tons. Suitable for chopping large logs of wood already cut in extreme speed, ease and safety. Pre-splitting wood allows a natural drying process and as a result, an increase in biomass quality and energy yield. As an option it can be equipped with an hydraulic rotator which guarantees a 360° performance.

OMEF SPV1 Plus wood splitter OMEF GROUP wood splitter is the right tool to split big logs-quickly, safely and efficiently. The cone comes with thread two or four principles, that allows an unrivalled performace on any type of wood. Equipped with an hydraulic gear motor, OMEF splitter can be also equipped with stump planer, to remove stumps from the ground, or with auger drill as well. The machine can be fitted with 4 End Conical Drill – Stump Planer – Auger Drill, according to the final use: With 4 ends conical drill, can break a piece of pre-cut wood into multiple pieces. Driven by an orbital hydraulic motor, penetrates the wood during its rotation, until the wooden fibres open and the trunk brakes. With stump planer, gets rid of the stump completely and in a short time, in roads, parking lots, parks and woodland. With auger drill, digs holes, piling, etc. The machine's compact dimensions enable to maneuver with absolute precision and rapidity.

SPV2 Plus Wood Splitter The machine can be fitted with 4 End Conical Drill – Stump Planer – Auger Drill, according to the final use: With 4 ends conical drill, can break a piece of pre-cut wood into multiple pieces. Driven by an orbital hydraulic motor, penetrates the wood during its rotation, until the wooden fibres open and the trunk brakes. With stump planer, gets rid of the stump completely and in a short time, in roads, parking lots, parks and woodland. With auger drill, digs holes, piling, etc. The machine's compact dimensions enable to maneuver with absolute precision and rapidity.

Omef Forestry Pruner CS100 Pruner for excavator for professional use, suitable to prune and chop small trees. Its blade made in special XAR500 anti-ware steel guarantees the best cutting performance. The hight-force generated by the hydraulic cylinder and its 360° rotation system, ensure the maximum flexibility and grip during working operations. It is an attachment for excavator from 1.6 up to 3.5 tons.

Omef Forestry Pruner CS200 Forestry pruner for professional use, suitable to prune and chop small and medium trees. Its blade made in special XAR500 anti-ware steel guarantees the best cutting performance. The hight-force generated by the hydraulic cylinder and its 360° rotation system, ensure the maximum flexibility and grip during working operations. It is an attachment for excavator from 3,5 up to 6 tons.

Omef Forestry Pruner CS300

Omef Forestry Pruner CS400 Forestry pruner for excavator for professional use, suitable to prune and chop small and wide trees. Its blade made in special XAR500 anti-ware steel guarantees the best cutting performance. The hight-force generated by the hydraulic cylinder and its 360° rotation system, ensure the maximum flexibility and grip during working operations. It is an attachment for excavator from 10 up to 24 tons.

SPV3 Plus Wood Splitter The machine can be fitted with 4 End Conical Drill – Stump Planer – Auger Drill, according to the final use: With 4 ends conical drill, can break a piece of pre-cut wood into multiple pieces. Driven by an orbital hydraulic motor, penetrates the wood during its rotation, until the wooden fibres open and the trunk brakes. With stump planer, gets rid of the stump completely and in a short time, in roads, parking lots, parks and woodland. With auger drill, digs holes, piling, etc. The machine's compact dimensions enable to maneuver with absolute precision and rapidity.