Equipment For Sale

MLS Number 12588791 2019 Komatsu WA320-8 Wheel Loader 12174 hours Cab CWS log fork Galaxy 20.5R25 tires

2006 komatsu pc200-7 Waratah 622b processor -Rebuilt pumps about 4100 hours ago -Rebuilt motor about 4100 hours ago -80% under carriage -Sprockets idlers Boom cylinders were all repacked -622B Waratah Processing head -Has new monitor -New head module -New cab module -New saw motor -Machine Runs and works great And is dry Cuts up to 28"

2016 Komatsu 430 L -6,300 hours -Quadco 22B 360 head -UC 50% -2 idler wheels been done -Few small leaks -Tight machine -Turntable bearing is tight Ready to work

Komatsu FD45T-7 Forklift 5.9 Cummins rebuilt 1k hours ago Approx 13k hours Single speed 10k capacity New batteries Work ready

2019 Komatsu 138 Excavator, 3500 Hours, Hydraulic Thumb

KOMATSU D61PX-24 Crawler DozerProven, second generation D61PX-24 comes standard with a parallel link undercarriage system for long undercarriage life. In addition to E and P modes, a new H mode helps operators maintain ground speed while operating under heavy loads. Specifications: -- Engine: Komatsu SAA6D107E-3 Gross 127 kW 170 HP 2200 RPM -- Travel Speed: - 1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph - 2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph - 3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph -- Number of track rollers (each side): 8 -- Fuel tank: 372 ltr 98.3 U.S. gal -- Weight: 18320 kg 40,389 lbs -- Hours:5200,Equipped with: -- Cab integrated ROPS (ISO 3471) High rigidity and superb sealing -- Hydrostatic Transmission (HST) control system -- PAT Dozer with Adjustable Pitch -- Comfortable Ride with Heated Operator Seat -- Cab Damper Mounting -- Parallel Link Undercarriage System (PLUS) -- Self-adjusting idler support -- Palm Command Control System (PCCS) Levers -- One-Pedal Design (Decelerator/Brake Pedal) Controls Speed, During Operation -- Selectable Working Mode -- Heavy-Duty High-Pressure Common Rail (HPCR) Fuel Injection System -- Komatsu’s New Emission Regulations-Compliant EngineNew parts: Brand new radiator Brand new chains, upper and lower rollers, and new pads. We can provide financing and also assist in the delivery to your location.

MLS Number 13686616 2014 Komatsu WA380-7 Wheel Loader 18429 hours Cummins 6.7 Goodyear 23.5R25 tires 75%

LOCATED IN ALLENWOOD, PA

Very good set of Komatsu 430 track groups in very good condition. 24 inch single grouser

Komatsu 400 series Feller buncher Final Dr. in excellent condition all inclusive

Valmet/Komatsu fellerbuncher footpedals sold separately or as one complete unit. Very good condition.

KOMATSU PC238 ROTOBEC 3045 WITH SAW TOP AND FRONT CAB GUARDING

Specialty harvester booms to fit Komatsu fellerbunchers. Exceptionally long reach. Complete set available. Call for pricing. In excellent condition.

2017 KOMATSU XT-460L FELLER BUNCHER #12475

28" Double Grouser tracks for 430 Komatsu and 445 Timbco, 735 TimberPro. Excellent Condition

KOMATSU D61PXi-24 Crawler DozerSpecifications: -- Engine: 126 kW / 169 HP @ 2.200 rpm (Turbocharged) -- Max. travel speed: 5.59 MPH -- Blade type: Straight -- Hours: 6,525Equipped with: -- Joystick operator controls -- IMC / GPS Machine -- A/C and Heated Enclosed Cab -- 6-Way Blade -- U-C is 65% Remaining -- Grade control -- Oscillation -- Drawbar -- Air Ride Seat

2013 Komatsu 941.1 Harvester with 10,520 hours. New hydraulic pumps for crane and drive also a new drive motor ar 10,200 hours. Equipped with a Komatsu 370.2 head, overhauled at 9,000 hours. A second 370.2 spare head is included. Operating weight 51,809 lb Transport length 26.5 ft Transport width10 ft Transport height 13 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Komatsu WA270-8, 1072 hrs., Bucket, Forks, EROPS, Heat/AC, generally stored indoors, used for snow removal, and a little bit of unloading freight, and loaded sand a time or two, meticulously maintained, $149,000

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i63 The Flex Series of CNC routers from Komo Machine has been developed specifically for the customer who expects the utmost in technical quality and reliability at an economical price. These machines feature a moving gantry configuration and a side-mounted tool changer. Features: Four-pole, 16HP (12kw), 24,000 RPM, HSK 63F, fan-cooled spindle, 12 position automatic tool changer with aggregate capability, Air blast for optimal dust/chip evacuation and cooling of the cutting tool, Advanced Fanuc HVI servo system tuned for optimum acceleration and deceleration, Fanuc Panel i control with integrated PC 19" color display Construction, FEA "Finite Element Analysis" engineered structure, Heavy-duty steel fabrication Specifications Spindle: 1 Spindle RPM 16HP (12kw), four-pole, fan cooled Up to 24,000, fully programmable with HSK 63F taper. Table: 60" x 144" (1524mm x 3658mm), Four (4) 1" (25mm) part location pins Aggregate-Capable Tool Changer: Max 12 tools, Max Dia. 3.25" (82mm) positions full; 6.5" (165mm) adjacent positions empty, Max weight 12 lbs each / 80 lbs total (5.4kg / 36.4kg) Max Length 5" (127mm) Feed Rate/Traverse: X-Axis 2500ipm (63.5mpm), Y-Axis 2500ipm (63.5mpm) Z-Axis 1200ipm (30.5mpm), Acc/Dec83.3 in/sec² Axis Travel: 149" (3784mm) x 82" (2082mm) x 8.5" (215mm) Positioning: ±0.0008" (0.02mm) linear axis repeatability accuracy Control System: Fanuc Panel i With integrated PC and 19" color display Dust Collection Interface: 6" (152mm) diameter (recommended volume 900 cfm) Includes: Dekker Vacuum Pump NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.