Equipment For Sale

John Deere 50 Series Tractor -Restored -Rubber is good -Clean and dry -Seat is in great shape

John Deere 548G Skidder Single arch Winch Rubber at 85-90% 17,600 hours No blow by Heat, winch, lights, fan, windshield wiper and the windshield washer all work Runs and operates good

2019 2154G John Deere processor 9,500 hours Good running condition 622B Waratah head Delivery available at buyer’s expense

2019 John Deere 948-L2 -6435 hours -35..5 tires -Chains 50% -New def pump -Well maintained

1987 John Deere 640D -12,000+ hours -Rear tires like new -Everything works great -4000 series winch -Great cutting edge -Front end all rebushed

1-AT402812 FIXED AXLE DRIVE SHAFT PARK BRAKE TO REAR AXLE WILL FIT 648L & 648L-II MACHINES

2006 Deere 753G Feller Buncher Hours 14,000, 22" Head with 45% Lateral Tilt, Undercarriage around 35%, 24" Pads enclosed Cab with Heat and Air Conditioning, New Hydraulic Motor on Saw Head, Ready for the Woods Weight 52,995 lbs Length 25 ft 8 in Width 10 ft 4 in Height 11 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

John Deere drive motor.PN#AT374510 $4500 + shipping NEW $16450.00 PLUS CORE Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

New is 8800 selling for 2500 plus shipping PN#AT379178 Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

JOHN DEERE 643J COMPLETE CONTROL VALVE PN#AT347730 LIST $11,500.00 TAKE OUT FROM A SALVAGE MACHINE, NO FIRE OR HEAT EXPOSURE. GOOD CONDITION ENDS CAPPED. READY TO INSTALL PRICE REDUCED TO $3500 TEXT Tim 251-366-3237 or GAVIN 601-410-3416 NO TEXT PLEASE

643J-843J HYDROSTATIC DRIVE PUMP/AT374509- CALL GAVIN AT 601-394-7796 OR TIM 251-366-3237

648G, 648G-II/III 1400 REAR DIFFERENTIAL INSPECTED AND RESEALED & REAR DIFFERENTIAL REPAIRED AND READY 648G-II, GIII FRONT 1400 DIFFERENTIAL REPAIRED AND READY YOUR CHOICE OR ALL 3 $5000.00 EACH CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

REMAN HALF AXLE WITH PLANETARY GEARS SWEDA 20 HOLE AXLE HEAVY DUTYPN# YZ120232 REMAN $5000.00 CALL GAVIN AT 601-410-3416 OR CALL OR TEXT TIM 251-366-3237

H model grapple pins 4- AT172277 $350.00 each. 2- AT356091 $125.00 each

ARTICULATION DRIVESHAFT TRANS TO PARK BRAKE SN#-685564 1-AT409576 $1250

JOHN DEERE 550K Crawler DozerThe John Deere 550K is a crawler dozer with a Power-Angle-Tilt (PAT) blade.Specifications: -- Engine: PowerTech PWS 4045 engine (turbocharged) -- Displacement: 4.5L (276 cu. in.) -- Net Rated Power: 92 HP at 2,200 rpm (69 kW) -- Transmission: Hydrostatic -- Blade Type: Power-Angle-Tilt (PAT) -- Blade size: 105" (2.67 m) -- Maximum Travel Speed: 8.0 km/h (5.0 mph) - Maximum (optional) 9.7 km/h (6.0 mph) -- Operating Weight (with standard equipment): 7718–8279 kg (17,016–18,252 lb.) -- Fuel Tank Capacity: 234 L (61.9 gal.). -- Hours: 1318Equipped with: -- Air conditioning and heated Cab -- Power-Angle-Tilt (PAT) blade -- Rock guards

2016 John Deere 1010E Forwarder, 10,036 hrs., $149,900

1997 John Deere 548G Grapple Skidder, 15k hours, Heat works, A/C just needs a new line it's pretty tight and dry, Everything works. Needs an ac line but the ac worked. Need a couple lights, windshield wiper and horn work. The worst thing body wise is it could use a left door because it's bent up a little but it still opens and closes. Weight 21,740lb Length 20.77ft in Width 9.85ft in Height 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

John Deere 700H & K, C frames & Blades

New final drive for 653 John Deere and others