Equipment For Sale

JET - JC-3CF: Cyclone Dust CollectorCyclone action separates the heavier chips & particles and disposes of them into a 55-gallon drum. -- 3 HP with 1,450 CFM -- Inlet size 8", Outlet size 8". -- Large 8-fin, 14" steel impeller creates high velocity air flow that allows the lighter dust to pass through and be trapped in the filter. -- Filter bag provides: Almost 40 sq/ft. of filtration surface area for all dust particles 5-micron and larger. -- Collection bags: "Snap-In" design for quick & easy installation and removal. -- Use of JET's "EXCLUSIVE" pressure tube allows the use of a plastic collection bag in the drum without the bag getting sucked into the Cyclone. -- Special rectangular inlet pipe adds separation and additional air flow. -- Steel construction with: Welded seams & powder coated paint ensures long, dependable performance.

2014 JLG G5-18A Stand-Up Reach Forklift with 1,157 hours. 74 hp, Max lift Ht. 18.05ft in, Max Forward reach 10.83ft in. Lift Capacity 5,500 lbs. Operating Weight 10,800.5lb 12.6ft in Height 6.4ft in Width 6ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 JLG G6-42A Stand-Up Reach Forklift with 4,093 hours. Max Lift Height 42ft in, Max Forward Reach 28.97ft in, Lift Capacity 6,600 lb. Operating Weight 20,399.4lb Length To Fork Face 17.72ft in Width Over Tires 7.91ft in Overall Height 7.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

35’ reach, 2250 hours, dual fuel, 4WD

JLG Man Lift

Other

2012 JLG Manlift, 35’ Boom, jib Boom, Tracks, Showing 4000 Hours, Nice

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

JLT Clamps 302-40-H-R DOOR AND PANEL CLAMP40" Capcity clamp (min 8-1/2") Patented Equalizer Design Provides Equal Clamping from the Front and Rear Jaws, Resulting in a Higher Quality Panel. #302 Style Clamp with Standard 3-1/2" High Jaws for Increased Durability and Less Clamps Per Glue Up.Also available with 36", 44" and 52" capacities.

JLT CLAMPS 78H-12-42-40 Mini Pod PressSingle section 12" wide x 42" long cap., 40" max. opening, 13" daylight, 30 ton max.,clamping pressure at 120 PSI, Pod Press is powered by a total of (18) 20 square inch diaphragm cylinders, upper platen has a 2" stroke when air is activated.Features: Heavy duty upper and lower steel platens, single lever valve pneumatic operation with dial regulator pressure controls, stack multiple wood components up to 12" wide and ships pre-assembled. Includes: Manual jack for platen adjustment.

JLT 78H-16W-84L-40H-M4 Pneumatic Pod Press w/adjustable Opening.Specifications: -- Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 84" long steel platens for face gluing a variety of solid wood components. -- Powered by a total of (18) 20 square inch diaphragm cylinders. -- With it's modular design each section has its own pressure control and 40" opening. -- 16" Wide x 84" Long x 40" High with fixed clamping opening with 1-1/2" adjustable increments. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 78H-16W-42L Mini Air Pod PressThis Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, Specifications: -- 16" Deep x 42" long clamping capacity. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 126" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening. -- 12" Deep x 42" wide clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, 13" daylight. -- 12" Deep x 42" long clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT Panel Pro Clamp Model 78D-5-S 5-Levels with (6) clamps each with panel flatner 110 v Single phase Will do 80”x 40”

42” Capacity Pneumatic operation

JLT 79K-10 Entry Panel & Door ClampVersatility: Leave the center squaring bar to do multiple doors at once or remove the bar to take advantage of the full capacity of the machine. -- Capacity for solid wood doors: 48" x 120". -- Quick release latches on the jaws; moveable squaring bar. -- Squaring mechanism can be recalibrated, if necessary. -- (2) Horizontal pneumatic clamps. -- (4) Vertical pneumatic clamps. -- 1-Lever operation. -- 1,000 Lbs Clamping force per cylinder. -- 3" Stroke from each cylinder.