Panel Saws For Sale

ACCURATE TECHNOLOGY Pro Kit Digital Measuring System (X & Y Axis)Vertical Panel Saw Kit, Horizontal axis, 40" range (mounts to left-most station only). -- Digital Readouts programmed to use offsets of +40, +80, +120 for stations 2, 3, and 4. -- Vertical axis, 82.7" measuring range. (same kit could probably be used for 76" machines); spans the entire range of vertical motion of the machine. Sometimes this mounts onto the right side of the beam, sometimes on the left (depends where you can find space for the installation). -- With this setup, the digital readout can:Measure bottom up from bottom fence, ANDMeasure bottom up from mid-fence (up to 3 flip outs can be used), ANDMeasure top-down with kerf compensationModel 290 scale offer excellent debris resistance (wood, plastic, and metal), plus high slew rates, and very low maintenance. The kits are typically supplied with our General-Purpose Readouts. These offer ability to measure from different references (such as bottom fence and flip-out, mid-fence on panel saws), plus kerf compensation abilities (for compensation during top-down cutting operations). -- Battery operation with CR123 Lithium Battery.

ALTENDORF F-45 Standard Sliding Table Panel SawSpecifications: -- 3,400 mm Sliding table length; 130" cutting length; 16" main blade cap. (18" blade cap. without scoring); 4-7/8" depth of cut,; 51" rip cut cap.; 7-1/2 HP main motor; 1 HP scoring motor with: 9,000 RPM blade speed. -- Equipped with: -- Electric raise & lower of the main blade; manual tilting of saw group via hand-wheel; from 0° - 45° with digital readout to 1/10th deg.; (4) cutting speeds: 3,000 - 4,000 - 5,000 & 6,000 RPM with digital readout. -- Includes: -- Digital readout on rip fence; 19/32" dado capability; sliding table lock mechanism; 31-1/2" x 29-1/2" table extension; articulating overhead guard w/dust collector outlet; 2,100 mm long extendable crosscut with: (2) Flip stops; machine manuals.

ALTENDORF F-45 Standard Sliding Table Panel SawSpecifications: -- 3,800 mm (149.5") Cutting length; 16" main blade cap. (18" blade cap. without scoring); 4-7/8" depth of cut,; 51" rip cut cap.; 7-1/2 HP main motor; 1 HP scoring motor with: 9,000 RPM blade speed. -- Equipped with: -- Electric raise & lower of the main blade; manual tilting of saw group via hand-wheel; from 0° - 45° with digital readout to 1/10th deg.; (4) cutting speeds: 3,000 - 4,000 - 5,000 & 6,000 RPM with digital readout. -- Includes: -- 19/32" Dado capability; sliding table lock mechanism; 31-1/2" x 29-1/2" table extension; articulating overhead guard w/dust collector outlet; 2,100 mm long extendable crosscut with: (2) Flip stops.

ALTENDORF F45 ELMO 3 CE 3,200 mm (10-1/2') 3-Axis Programmable Sliding Table SawSpecifications: -- Max. cutting length 3,200 mm (125.98"). -- Max. depth of cut 150 mm (5.91"). -- Main saw: 5.5 kW (7-1/2 HP) Motor, with Automatic brake, Blade dia. 15", Arbor dia. 30 mm (1.18"), Arbor tilt 0° - 45°, & Blade speeds 3,000, 4,000, 5,000 & 6,000 RPM. -- Scoring saw: 0.75 kW (1 HP) - 9,000 RPM Motor, Blade dia. 120 mm (4.72"), & Arbor dia. 15 mm (0.59").Equipped with: -- "SLIDER 3200" 3,200 mm (125.98") Aluminum sliding table, with Middle & end position locking, Fixed table. -- Main saw blade programmable height & tilt adjustment. -- Automatic main saw blade height/tilt compensation. -- Automatic dimensional correction for saw blade tilt. -- Scoring saw motorized rise & fall and Iateral adjustment. -- Programmable rip fence, with 1,300 mm (51.18") Cutting width cap., 15 MPM (49 FPM) Positioning speed. -- Crosscut fence, with Cross slide extension, (2) Flip stops, & Sliding outrigger support. -- Eye level touchpad control, with Joystick & LED displays for main saw blade height & tilt, & rip fence. -- Swing away parallel blade guard.Complete with: -- Manual. -- (6) 12"; & (2) 14"; Blades.

Altendorf Sliding Table Saw

CAM-WOOD TX-P10AAT FRONT LOAD AUTOMATIC PANEL SAW: Shop Saw -- Specifications: 128" (3,250 mm) Max. rip cut cap. & 128" (3,250 mm) max. pull-back front/back; 15 HP (11.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar;0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:PC Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost; (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P10AAT

CAM-WOOD TX-P330X FRONT LOAD AUTOMATIC PANEL SAW: "High Production Saw" -- Specifications: 126" (3,200 mm) Max. rip cut cap. & 126" (3,200 mm) max. pull-back front/back; 15 HP (11.2 kW) saw blades motor, 1" dia. arbors,3-1/8" (82.5 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,180 mm (7") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 150 FPM (5 - 46 MPM), return speed of 100 FPM (30 MPM). -- Pusher/Gripper Fence: Programmable rear material push/gripper fence with AC servo drive, 1 HP pusher motor, rack & pinion drive, 16 - 80 FPM (5 - 24 MPM) speed. -- Operator & Machine Control:PC Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: TX-ATASA automatic side alignment device, (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. (1) TX-P3SB THIRD JUMP SCORING UNIT = $4,290.00 additional cost. (1) PC BASE CONTROL (Optional with OPTIMIZE SOFTWARE) = $4,890.00

CAM-WOOD TX-P12AAT FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Max. rip cut cap. & 149.6" (3,800 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar.0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:PC Controller with touch-pad to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost. (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P12AAT

CAM-WOOD - VPS IS Compact, ...Vertical Panel Saw (76" x 122" w/Scoring)Short 10' Frame Compact Model with Scoring offers many features in a compact space-saving design. -- Top to Bottom cutting height is 2,030 mm (78-3/4") without scoring and 1,930 mm (76") with scoring; saw head w/motor rotates 90° for rip or crosscutting. -- Cutting length "rip cut from left/right" is 3,100 mm (122"); cuts single or stacked panels up to 42 mm (1-5/8") in thickness.Features: -- Separate 5" dia. scoring blade belt driven at 7,800 RPM to insure clean cuts on everything from Plywood to Melamine & Hardwood, especially preventing surface chipping when cutting laminated materials. -- Includes: -- 4 HP Motor and true scoring with a 125 mm (5") dia. 24-teeth blade, 250 mm (10") dia. 80-tooth main blade; spring loaded floating saw blade enclosure - shoe glides over panel surface applying a holddown force while it enhances dust collection & safety by enclosing the saw blades. -- Auto-shifting material back support grid shifting away from the saw blade cutline prevents cutting into the grid support strips while rip cutting horizontally; it senses the blade/cutter position and automatically shifts away.Equipped with: -- Precision ground bottom edge support rollers to facilitate easy loading & positioning of the larger or heavy panels; both standard inch & metric preset "beam lock" stations. -- Vertical cutting stations are spaced at 40" or 1,000 mm (in inch or metric) increments to lock in the saw beam for vertical crosscuts. -- (2) Adjustable flip-stops on inch (metric available) measuring scales, one located on the lower rail and the other on the foldout shelf at the middle of the frame. -- Retractable Material Support Shelves throughout the entire length of the machine frame allows for ergonomic cutting of smaller parts, at any cutting station without the need for the operator to bend down. -- Includes: -- Pneumatic lock System; Repeat Cutting Device; (1) 250 mm (10") dia. 80-tooth, 30 mm bore main blade; (1) 80 mm (3.14") dia. 24-tooth, 20 mm bore scoring blade.

CAM-WOOD TX-P3200SAX Sliding Table Panel Saw w/Motorized Raise & Lower.Heavy-duty construction, vibration-free operation. Easy to set up and quickly adjusts. High accuracy, free movement sliding table without wear resistance.Specially designed double rollers carriage made by aluminum profile. Stable, torsion-free cross slides with easy running swinging arm.Features: -- 126" Cutting length w/scoring; 126" x 17" Anodized sliding table that locks in any position for easy loading. -- Motorized Saw blade up or down movement by 1/4 HP electric servo motor; tilting by manual handle wheel. -- Scoring unit for clean, accurate chip-free cutting, ready for edge banding. Specifications: -- 7.5 HP Main saw motor; 45° tilting (30 mm) main saw arbor; 14" Main blade dia.; 3,000/4,000 & 5,600 RPM arbor speed. -- 5.3" Max. material thickness at 90°; 3.1" at 45°. -- 1 HP Scoring saw motor, 5" dia. scoring blade; 8,000 RPM. -- Equipped with: 49" Max. ripping cap.; micro-adjustable rip fence and extendable crosscut fence to 10' with (2) flip stops. -- Articulating overarm protection guard; outboard and rear extension tables. -- Includes: Saw Blade(s), Maintenance Tools, Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD TX-P3200PL Sliding Table Saw w/Motorized Raise/Lower/Tilt & Programmable Rip FenceHeavy-duty construction, vibration-free operation. Easy to set up and quickly adjusts. High accuracy, free movement sliding table without wear resistance.Specially designed double rollers carriage made by aluminum profile. Stable, torsion-free cross slides with easy running swinging arm.Specifications & Features: -- 126" Cutting length w/scoring; 126" x 16" Anodized sliding table that locks in any position for easy loading. -- Saw blade moves up or down, tilting and fence movement driven by 1/4 HP electric servo motor. -- Scoring unit for clean, accurate chip-free cutting, ready for edge banding. Equipped with: -- 9 HP Main saw motor; 45° tilting (34 mm) main saw arbor; 15-3/4" Main blade dia.; 4,000/5,600 RPM; -- 5.3" Max. material thickness at 90°; 3.1" at 45°. -- 1 HP Scoring saw motor, 5" scoring blade; 8,000 RPM. -- 49" Max. ripping cap.; (200) memory program control for the rip fence, saw blade height and tilting angle via touch control screen for convenient operations; -- Extendable crosscut fence to 10' with (2) flip stops. -- Articulating overarm protection guard; outboard and rear extension tables.

CAM-WOOD - VPS I +, ...Vertical Panel Saw (82.67" x 161.41" w/Scoring), Vertical-Horizontal Digital Readouts & Auto Lock System. Top to Bottom cutting height is 2,100 mm with or without scoring; saw head w/motor rotates 90° for rip or crosscutting; cutting length 4,100 mm; cuts single or stacked panels up to 60 mm (2.36") in thickness.Standard features: -- 4.0 HP Motor (5.5 HP Option) with a 250 mm (10") dia. 80-tooth main saw blade. -- Separate 80 mm (3.15") Dia. scoring blade, belt driven at 7,800 RPM; single-screw adjustment for side-to-side and depth. -- Auto-shifting material back support grid; shifting away from the saw blade cut line, prevents cutting into the grid support strips while rip cutting horizontally; it senses the blade/cutter position and automatically shifts away. Equipped with: -- Precision ground bottom edge steel support rollers to facilitate easy loading and positioning of the larger or heavy panels; both standard inch and metric preset "beam lock" stations. -- Vertical cutting stations are spaced at 40" or 1,000 mm increments to lock in the saw beam for vertical crosscuts. -- (2) Adjustable flip-stops on inch (metric available) measuring scales, one located on the lower rail and the other on the foldout shelf at the middle of the frame. -- Repeat Rip Gauge for duplicating multiple horizontal cuts. -- Retractable Material Support Shelves throughout the entire length of the machine frame allows for ergonomic cutting of smaller parts, at any cutting station without the need for the operator to bend down.Includes: Vertical-Horizontal Digital Readouts; Pneumatic lock System; Repeat Cutting Device; (1) 250 mm (10") dia. 80-teeth, 30 mm bore main blade; (1) 80 mm (3.14") dia. 24-tooth, 20 mm bore scoring blade.

CAM-WOOD TX-E8V Automatic Vertical Panel SawSpecifications: -- 98-1/2" Cutting length (cuts vertically top to bottom), adjustable depth of cut up to 2-3/8", 12" blade dia. with 1" dia. bore, single blade scoring; 5 HP main motor.Equipped with: -- Manually positioned pusher fence with grippers; precision ground guide rod, made from medium carbon steel coated with hard chrome, provides smooth and accurate travel. -- (3) Cutting modes: Standard, trim & cutoff to permit clean burrs, repeat cutting mode; heavy gauge base frame & table rest is welded from cold rolling steel plate, offering rugged construction. -- The uniform holding pressure through the entire pressure beam is achieved through a linkage mechanism, ensuring synchronized cylinder actuation on both sides. Flexible saw stroke adjustment enables the operator to select the desired stroke either full way or run out panel return depending on the panel length to be cut, this reduces considerable cycle time. Complete with: -- Fence made of cast iron and the surface precision ground is fitted with a flip-over stop for convenient repetitive cutting; saw carriage runs with bronze wheel, which is CNC lathe precision machined or accurate concentrically producing fine smooth surface cut; the guide rods, hard chrome-plated, provides rigid support for saw carriage; the ripping accuracy is guaranteed. -- 1 HP drive, variable speed saw carriage, cuts 16 - 98 FPM; return speed 98 FPM. Includes: -- Dust chute is covered with a split rubber to form a totally enclosed dust collection system, and fully prevents the hose from being broken resulting from its fatigue. -- Sectional dust guard not only acts as a surrounding saw blade guard but also fully prevents sawdust from spraying out of the machine.

CANTEK D405ANC 1-Axis SLIDING TABLE SAWSpecifications: -- 126" Cutting length w/scoring; 126" x 15.5" Anodized sliding table that locks in any position for easy loading. -- Motorized Saw blade up or down movement; motorized tilt with digital readout via 1/4 HP electric servo motor. Equipped with: -- 7.5 HP Main saw motor; 45° tilting (30 mm) main saw arbor; 14" Main blade dia.; 3,000/4,000 & 5,000 RPM arbor speed. -- 5.3" Max. material thickness at 90°; 3.1" at 45°. -- 1 HP Scoring saw motor; 20 mm arbor; 4.72" dia. scoring blade; 8,000 RPM. -- Features: -- Motorized rip fence control with eye level control; 51" Max. ripping cap.; crosscut miter fence to 10' with (2) flip stops. -- Articulating overarm protection guard; outboard and rear extension tables. -- Includes: -- Saw Blade(s), Maintenance Tools, Operators' & Parts Manual and covered by (1) Year Warranty.

CASOLIN - ASTRA DIGIT: Sliding Table SawEquipped with: 3,200 mm (10-1/2' cap.); CASOLIN Patented "RGS" with double-roller (8-wheel) & track. -- 7-1/2 HP Main motor and 1.0 HP scoring motor; 400 mm (16") max. main blade dia.; 120 mm (4-1/2") scoring blade dia. with: 20 mm Arbor at: 3,200 - 4,200 & 5,000 RPM. -- Air ride fence; electric raise-and-fall of the blades; as well as tilt; steel base with: Reinforced frame for additional strength.Includes:External scoring adjustments from the side of machine; swing-away guard with built-in dust collection; see-through shroud. Actual Model: Astra Digit

FELDER - K 540 S: Sliding Table Panel Saw Specifications -- 98" Cutting length w/scoring; anodized aluminum sliding table with: Tracking by roller bearings; locks for easy panel loading in any position. -- 3-1/2"; Cutting height with: 13.77"; (350 mm) Saw blade (140 mm with 400 mm blade); 120 mm scoring blade; 90° - 45° tilt of blade; 49.21" (1,250 mm) rip cap.Equipped with: -- 7.5 HP Main motor; scoring unit w/external adjustment; manual height; tilt adjustment. -- Preparation for Dado tooling up to: 1.5 mm; 102" (2,600 mm) square crosscut fence with: (2) Stops; extension table with: sliding outrigger support.Includes -- Overhead saw guard swings away from working area.

FELDER - KF 700S: Sliding Table Panel Saw, Spindle Moulder, & ShaperSeen: Little use; perfect working order, and Conditions! -- Motors Rated: 5.5 kW with: DELTA START; electric height adjustment of saw & spindle Moulder; scoring unit with: Separate motor; spindle fence plates with: Safety bar guides. -- Dimension sliding table: 2,800 mm; Precision miter guide with: Cutting length compensation; remote "On" switch on: Sliding table; tilting bracket for power feed; FELDER "F38" Power Reed & table extension.

2019 Gabbiani P 55 Front Loading Panel Saw Like New !

Gabbiani Gallixy 125 Rear Loading Panel Saw

Gabbiani Galaxy 125 Panel Saw Manufacturer Specifications to be confirmed: Cutting length; 3800mm Pusher stroke; 3800mm Speed is variable, via VFD Number of grippers; 9 Main motor power; 18.5kw (25.5hp) Saw blade diameter max; 420mm Saw blade projection 125 mm