Equipment For Sale

Stick/bucket/thumb assembly for Tigercat 234/240B. $10,000. Good condition.

2016 620E Tigercat, dual arch & winch, tight, 30.5's 15K HRS but has extremely well taken care of ready to work !

2020 Tigercat 602 -4650 hours -Deleted and tuned -Winch -30.5x32 tires -Full service and filters from Ricer Equipment

35.5 tires, winch, dual arch, 17' grapple, ready to work.

MLS Number 10778902 2013 Tigercat 630D Skidder 7,200 hours One owner Cummins Tier III engine to be rebuilt 35.5 Tires at 75% with dualing rings No winch (has valving and is set up for adding winch) Tight and Dry Machine Well maintained

LOCATED IN BOONVILLE, NY

CSI 264 ULTRA, Tigercat LG4053 grapple, one owner, nice northern machine.

1999 Tigercat 726B Feller Buncher, 9700 Hours, New Cummins 8.3 Remaned Engine with Low Hours, All Cylinders Repacked, Enclosed Cab with Heat, Tires are 30.5 x 32 Center Section is Good. Ready for the Woods Length 20 ft 0 in Width 9 ft 9 in Height 11 ft 0 in Weight 28,040 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

28L tires, 5603 saw head, rebuilt hydrostat motors and drive pump, ready to go.

2021 Tigercat 625H Bogie skidder, heat and air cab winch stereo system air ride seat, joysticks controls with turn around seat, has dually wheels come with it front to back, that are knee deep in rubber. 8,178 hrs. $235,000.... Call eddie at 931-seven 04-7852

This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

2017 Tiger Cat LX830D Feller Buncher -10146 Hours -New stick with new pins for stick 1700hrs ago -Resealed tool cylinder -New butt plate 1700hrs ago -New radiator 1500hrs ago -New tilt cylinder pins and bushing 1700hrs ago -Updated cooler -Complete new undercarriage about 2200 hrs ago -Has been serviced with fully synthetic oils -Ready to work

2013 Tigercat 720E Feller Buncher 11094 hours 5600 head with new disk 30.5x32 tires AC Heat No leaks Tight machine Woods ready

2015 Tigercat 620E Grapple Skidder, 10.000 Frame Hours on Machine, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight , Tires are 30.5 x32 Machine is Ready for the Woods. Weight 37,750 lbs Length 27ft Width 12 ft Height 10ft 4in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Tigercat 234B Log Loader, Includes a CSI 264 Ultra Delimber . Engine has 10,000 Original Hours, Optional Tigercat Slasher Saw Available also, Enclosed Cab with Heat and Air Conditioning Mounted on Kodiak Trailer Ready for the Woods Operating Weight 32,750 lb Shipping Length 31.99ft in Max Height 24.94ft in Width 8.5ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Tigercat 870D Feller BuncherLeveling Cab, NO DEF, 2500 Hours on NEW UNDERCARRIAGE, 1000 Hours on Rebuilt Saw Head and Leveling Cylinder, Encosed Cab with Heat and AC, Tigercat Saw Head. Operating Weight W/O Attachment 66,870 lb Overall Length 18.18ft in Overall Width 10.83ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

USED 720 TIGERCAT TRANSMISSION. PART #BK003 LIST FOR $15,900 NEW USED PRICE CUT TO $2500. NO CORE REQUIRED. FUNK MANUFACTURING MODEL HS1741A,SPEC #YZ14817B, SER# 95022853. CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237