Pallet Chief For Sale

2010 Bandit 2290 Track Whole Tree Chipper, 6,000 Hours, John Deere 350 HP Engine, 7 sets of extra knives, Babbit Included, Enclosed Cab with Heat and no AC, Rotobec Grapple, Undercarriage is 75%, Cat Infeed Chain 5-1/2 Foot long, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit 2650 Wheeled Stump Grinder, Remote Control, Good Running One Owner Trade In.

1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit 2400T Whole Tree Track Chipper , Only 3,021 Original Hours, Undercarriage is 95% Enclosed Operators Cab with Heat and Cold Air, Caterpillar 765 HP Turbo Diesel Engine, Cat Infeed Chain with 4 Roller Feed System., Autofeed , Hydraulic Swivel Discharge, Hydraulic Flapper Engine Pre Cleaners Hydraulic Oil Coolers Rotobec 360 Degree Grapple... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit Chipper with hydraulic dumping hopper 3-cylinder Deutz air cooled engine New hoses and freshly painted

2021 Bandit 3680T Wood Grinder -147 Hours -5 Year CAT Warranty -Excellent Condition - More photos and info coming.

New Bandit 2290 Tracked Whole Tree Chipper, In Stock for Sale or Rental.

Barberan UV Oven

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

NEW Barko 295B Loaders, Carrier Packages Available - IN-STOCK!

one owner machine, mounted on self propelled carrier, saw hook up's, perfect condition!

2021 Barko 595B, 3800 hrs., Hydrostatic, R squared 5628 Delimber, 52” barko grapple, CSI 4400 slasher ready for the woods, $185,000

2021 Barko 595B, 3860 hrs., hydrostatic, 52” Barko grapple, Rsquared 5628 Delimber, CSI 4400 groundsaw with extension, 2021 Pitts Trailer, Ready to go to work,

2014 Barko 595ML Log Loader -12917 hours -Cummins -Hydraulic Kodiak series 3 trailer -No slack, tight turn table -Cold A/C -Heat -Radio everything works

2023 Barko 260B Harvester with Southstar Head. Very Low 612 Hours on Machine. On Consignment.

New Barko 80 XLE Loaders IN-STOCK!

2021 Barko 595B -Clean machine -2981 hours -Everything works as it should MORE PICTURES COMING SOON