Pallet Chief For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 181 of 483
9647 Results Found
Sort By 
$ 42,000

19.5 Tires, 24" Bucket, 4X4 Power Shift Tran, Aux Hydraulics, General Purpose Bkt, Pilot Controls, ROPS

 HOUSTON, TX
Doggett Machinery
225-306-7028
Call

$ 119,500

2015 John Deere 1010E, 17,634 hrs., Espar pre heater, Deere 4045 POWERTECH w/2 speed hydrostat trans., boom runs smooth, front tires 710 /55 R34 40%, Rears 710 /40-24.5 40%, PC Monitor, $119,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 119,500

2014 John Deere 1210E, rotating cab, Heat/AC, Nokian Forest King Tires size 710/45-26.5, all around 70%, preheater, blade, $119,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 300,000

2018 John Deere 853MH, 7,477 Hours. STK#24704 $300,000

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

$ 49,000

1998 Deere 548E Cable Skidder One Owner, Enclosed Cab with Heat, Tires are in good shape, Centers Tight One Owner Machine, Ready for the Woods. Length 20.77 feet Width of 9.85 feet Height to the top of the cab of 9.88 feet Weight of approximately 22,801 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Columbus, OH
NEF Equipment
855-251-2648
Call

$ 62,900

2004 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE NEW CENTER PONS AND BUSHINGS BLADE PINS AND BUSHINGS

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 165,000

24" Pads, 3.15 m (124 in.) Blade, Cab w/ AC, Hydrostatic Trans, Low Ground Pressure, Power-Angle-Tilt

 HOUSTON, TX
Doggett Machinery
225-306-7028
Call

$ 145,000

24" Pads, 3.96 m (156 in.) Blade, Cab w/ AC, Hydrostatic Trans, Lever Steer, Low Ground Pressure, Power-Angle-Tilt, Winch

 MONROE, LA
Doggett Machinery
225-306-7028
Call

$ 160,000

34" Pads, 4.09 m (161 in.) Blade, Cab w/ AC, Hydrostatic Trans, Lever Steer, Low Ground Pressure, ROPS

 HOUSTON, TX
Doggett Machinery
225-306-7028
Call

$ 135,000

28" Pads, 60" Bucket, Aux Hydraulics, Blade, Cab w/ AC, Cntrl Pattern Select, Hydraulic Thumb, Medium-Long Arm, ROPS, Standard Boom, Standard Track

 COVINGTON, LA
Doggett Machinery
225-306-7028
Call

$ 160,000

34" Pads, 42" Bucket, Cab w/ AC, Mechanical Thumb, ROPS, Short Arm, Standard Boom, Standard Track

 LUFKIN, TX
Doggett Machinery
225-306-7028
Call

$ 42,500

1986 Deere 648D Skidder. Good Engine Hours Unknown, Winch Arch Cylinder Repacked, Rebuilt Rear End, 24,5 x32 Tires New Tires on Rear, 50% on Front, Door and Glass Replaced, Complete Transmission Rebuilt Ready for the Woods. Length: 22 ft 7 in Width: 11 ft 0 in Height: 9 ft 8 in Weight: 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Erie, PA
NEF Equipment
855-251-2648
Call

$ 275,000

2016 John Deere 853M – 6,350 Hours. STK#24703 $275,000

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

$ 345,000

2023 John Deere 648L-II, 784 Hours. STK#23982 $345,000

 Syracuse, NY
Five Star Equipment
570-359-2000
Call

$ 189,000

2013 Deere 753J Feller Buncher, FR 22 360 Degree Head, Undercarriage 90%, ONLY 6,500 Original Hours, Enclosed Cab with Heat and Air Conditioning, Back up Camera, Fire Suppression. Length: 31 ft 0 in Width: 11 ft 5 in Height: 13 ft 2 in Weight: 53,950 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Erie, PA
NEF Equipment
855-251-2648
Call

$ 135,000

2016 John Deere 335D -8613 hours -Hydro saw -Tight and dry -Lights and tires are good Everything works as it should!!!

Josh Digirolamo
828-302-7264
Call

$ 615,000

2024 John Deere 2654G Processor -800 hours -Waratah 623C head -36" triple grouser pads Like New!!!!

Josh Digirolamo
828-302-7264
Call

$ 28,000

This 748H had been pulling wood every day before we bought it. The engine will need some work, it makes a ticking sound we’re not sure what it is, but besides that the machine is in good condition. All it would need is a newer set of tires and some engine work and this would be a very fine machine. It has 19,342 hours on it. For more information call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The skidder is being sold from Ala-Miss, Inc. located at 467 St Peter St, State Line, MS, 39362

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 75,000

2015 John Deere 648H, low hours, $75,000 - Call Tom: 272-223-1324 or 570-889-3636

T & L Equipment Sales
570-889-3636
Call

Call for Price

2015 John Deere 648L, Call for Price - Call Tom: 272-223-1324 or 570-889-3636

T & L Equipment Sales
570-889-3636
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved