Equipment For Sale

2015 Ponsse Ergo Harvester ONLY 4800 Original Hours, C-5 Crane, 710 Tires, Tracks are 25%, All pump shafts are being sealed, Enclosed Cab with Heat and Air conditioning, Ready for the Woods Length 25.2ft in Width 9.32ft in Height 12.37ft in Weight 35,274 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Ponsse Bear Processor -2300+ hrs(working) -H8 head -Tires 95% -Tracks 95% -Tight and dry

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor/Harvester H7 head 2 owner 13k hours Complete refurb by Ponsse Currently on the job in use daily 2014 Ponsse Wisent forwarder also available

2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Scorpion King Processor, Equipped with H-7 Crane, Engine has 11,500 Hours, One Set of Eco-Tracks, Extra Bar and Chains, Has CT+ 1 Auto Tensioner, Enclosed Cab with Heat and Air Conditioner, Air Condition Just recently done by Ponsse, More Pictures of Interior Coming Soon. Comfort Grips. Weight 49,604 lbs Length 316 in Width 104–112 in Height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Ponsse Elephant Forwarder with 20,700 hours. Weight 50,260 lbs Length: 400–436 in Width: 118–130 in Height: 157 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Ponsse Wisent Forwarder with 12,500 Hours 8,5 m Crane Weight 31,085.2lb Length 29.7ft in Width 9.32ft in Height 12.14ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Ponsse Buffalo – 4,123 Hours, STK#32046C. $330,000

2014 Ponsse Wisent Forwarder 9500 hours 2 owner Nice machine Currently on the job in use daily 2011 Ponsse Ergo processor with H7 head also available

2003 Ponsse Bison 6 Wheel Forwarder Runs Approx 14K Hrs

1988 Ponsse Buffalo 8 Wheel Forwarder Rebuilt Engine One Valve Bank Rebuilt But Not Installed Parts Machine

2019 Ponsse Buffalo King Forwarder, Equipped with 2 Sets of Tracks, Leveling Crane, 11,400 Hours, Fire Suppression, Tires are 75% DEF Engine, Enclosed Cab with Heat and AC, Backup Camera, New Pump, Ready for the Woods Clean Machine Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo Harvester with 17.800 hours and a Ponsse H7 Head. This machine has just been fully serviced. Weight 35,274lb Length 25.2ft in Width 9.32ft in Height 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion King Harvester with 11,500 hours. Includes a Ponsse H7 Head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion King Harvester, 13,000 hours, H7 R5500 head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2024 Ponsse Scorpion Giant Processor with 600 hours, H8 Head The 2024 Ponsse Scorpion Giant Processor with the H8 Head isa wheel-based harvester with a powerful, durable head for processing large trees.It's designed to be versatile and can be used in various sites. Features: H8 harvester head:This head provides a greater processing speed and can handle larger diameters.It also has smart automated systems for precise cutting. Operator comfort:The cabin is located in the middle of the machine, which improves visibility and comfort. Crane solution:The crane solution provides excellent visibility in all directions. Stability:The machine provides more stability when working on slopes. Versatility:The machine can be fitted with different harvester heads, including the H6, H7, H7HD Euca, and H8. Weight 50,706 lbs Length: 315.7 in Width: 105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.