Equipment For Sale

2008 Caterpillar D6T -5085 hours -No blow by -Slope board -Rippers -Clean machine Working daily

MLS Number 12544095 2021 Caterpillar 950M Wheel Loader 3698 hours Cat diesel Cab with AC All wheel drive No required repairs 4.75 cu yd bucket Cutting edge 70% Firestone 23.5-25 tires 80%

2005 Cat P6000 fork lift, propane, 3 stage mast with side shift.

2006 caterpillar CP-433E roller-vibrator 66 inch pad foot drum, blade, canopy open cab. 8,011 hrs. $46,500.... Call eddie at 931-seven 04-7852

2 of the head pin lugs welded on (looks good). Tongs worn but straigh. Snubber and pins present. Very nice grapple

2005 Caterpillar 525B Grapple Skidder Dual arch No winch 30.5s at 50% Ring chains on front Center is tight Engine and tranny are good New rear end New lift cylinders 11k hours Runs and operates good Semi retiring and no longer needed Stock image. Photos coming soon

2000 Caterpillar 525 Grapple Skidder, No Winch, Has Original 6000 Hours on Engine and Transmission, Tires are 30.5 x 32 with only 200 Hours of Use, Tires are 90%, All Cylinders have been rebuilt, Enclosed Cab with Heat and Cold AC, NICE Machine Ready for the Woods Operating Weight 39,045 lb Overall Length 27.46in Overall Width 11.15ft in Height To Top Of Cab 10.45ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Manufacturers Specifications Engine Engine Make 2236 Engine Model C7 Net Power 194hp Displacement 428cu inOperational Operating Weight 57071lb Fuel Capacity 137.4gal Hydraulic System Fluid Capacity 41gal approx 5500 hours

2015 CATERPILLAR 312EL EXCAVATOR 2,994 HOURS CATERPILLAR QUICK COUPLER CATERPILLAR THUMB TILT CLEAN UP BUCKET DIGGING BUCKET CAT C4.4 ACERT ENGINE 33,069 OPERATING WEIGHT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

CTR 426, hydraulic crawler trailer, GLK55 grapple, fully serviced and ready to work.

CAT “C” Series Skid Steer Lexan Door 1/4” or 3/8” or 1/2” Starting at $450 New Holland Skid Steer Lexan Door 1/4” or 3/8” or 1/2” Starting at $450 - Call 715.560.3929

2016 CAT 559C, Low Hours, $75,000

1991 Cat 518 Grapple Skidder with Winch, Blade, Hours unknown, Very well maintained machine. Weight 26,510.6lb Length 18.25in Width 11ft Height 9.55ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 CAT 501HD Processor, Undercarriage @ 90%, Clean Machine, ready for the woods, Trades Welcome, $122,900

Caterpillar 518 Cable Skidder 23.1x26 tires in good shape Chains on fronts Center is tight 3304 engine Cat winch High frame hours 22,471 hours No blow by and doesnt have any tranny problems Runs and operates good

Parting out Caterpillar D4H Series II bulldozer available for parts- very low hours UC, Good transmission, finals, c frame and more

2017 Caterpillar 525D Grapple Skidder, Only 5500 Original Hours, Enclosed Cab with Heat and Air Conditioning, Winch, Tires are NEW in REAR, 95% in FRONT. New Cable and Slides, New Service Ready for the Woods. Weight 45,249 Length: 356.3 in Overall width: 145.81 in Height: 138 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CATERPILLAR 308E2 CR Compact Hydraulic ExcavatorHigh performance and durability, and its compact radius allows it to work in areas where larger excavators can't operate.Specifications: -- Engine: Cat C3.3B 65 HP -- Operating Weight: Approximately 18,519 lbs (8,400 kg) -- Ground Pressure: 5.26 psi -- Maximum Dig Depth: Up to 163.5 inches -- Maximum Lifting Capacity: 7,385 lbs front / 5,401 lbs side -- Travel Speed: Low: 1.74 mph, High: 3.17 mph -- Bucket Rotation: 180 degrees -- Bucket Size: 24"Equipped with: -- A/C and Heated Cab -- Hydraulic Thumb -- Bolt-on Rubber Pads -- Auxiliary Hydraulics -- Mechanical Coupler -- Front Blade -- U-C 50% remaining

CAT 501HD, 11,699 hrs., $134,900

2010 CAT 525C Skidder, Newer Model, Runs Very Good, $40,000 - Call Tom: 272-223-1324 or 570-889-3636