Equipment For Sale

TAKEKAWA - RG-30S, ...Straight Line Rip SawSpecifications: -- 15 HP - 5,000 RPM Belt driven arbor, overhead arbor design. -- 1-1/4" Dia. arbor. -- 12" Dia. max. blade cap., 2-3/4" max. depth of cu.t -- 12" Min. part length. -- Throat clearance to the right of blade 26". -- Table size: 74" Long x 38" wide; 2 HP step feed drive, 33 - 66 & 131 FPM.Equipped with and Features: -- Automatic chain lubrication. -- Top pressure system with spring loaded rollers. -- Adjustable rip fence. -- Antikickback fingers. -- Push buttons and magnetic starters.

2014 Takeuchi TL8RW Skid Steer with 2,510 hours. 74.3 HP on Diesel powered Kubota Engine, 2,100 lbs Lift Capacity (35% Tipping) 3,000 Lift Capacity (50% Tipping). Max travel speed 4.6 mph. Dump Height 93.3 in. Dump Reach 28.7 in. Operating Weight 8,630 lbs Height 83.9 in. Width 62.2 in. Length 135.1 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Hours Read: 4,208 hours. Powered by a 68.5HP Yanmar 4TNV98-YTBL 3.3L Diesel Engine, Hydrostatic Drive. Equipped with 66in bucket, manual quick coupler, 18in rubber tracks, auxiliary hydraulics. Runs and operates excellent

2017 Talbert Lowboy -GVWR 95,600 GAWR ALL axles 20280 -255/70R22.5 LRH 22.5x8.25 rims at 828. KPA 120 PSI COLD DUAL -Model TLW-35-FG-Bvt1 35 ton capacity 29ft long on flat bed by 8’6” Spring suspension -35 ton capacity -29ft long on flat bed by 8’6” -Spring suspension

2007 Talbert DW-55 SA Utility Trailer Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 TALBERT 50 TON LOW BOY GOOD TIRES GOOD BRAKES GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CONDITION GRANITEHE.COM

TANA- SHARK 440DT, ... Portable Dual Shaft ShredderSpecifications: -- Approx 3900 Hours and New in 2015 --Bolt-on cleaning combs for easier maintenance --Magnet conveyor improvements - Discharge side to be selected from TCS + hydraulic magnet adjustment during operation --Rated power (SAE J1995) 399 kW (535 bhp) @2100rpm --Nominal torque 324,530 ft-lbs 440 kNm --Rotor length 9 ft 10 in --Number of rotor knives 33 / 44 --Screen sizes Available from Tana- 1.9", 3", 3.5", 3.9", 4.3", 4.7", 5.5", 6.6", 8.7", 10.8" --Screen area 29.6 sq ft

TANNEWITZ - XJ, ...Table SawSpecifications: -- 5 HP - 3,600 RPM Fan cooled motor, 1" right tilting arbor Table Saw with a 1-piece main table; table size 42" wide x 44-1/2" deep. -- Base formed from hot rolled steel of 5/16" thickness & welded into (1) solid unit; 10" dia. handwheels for easy adjustment of tilting, raising & lowering of arbor. -- Complete with: Extended rack & pinion adjustable rip fence for greater ripping capacity; left- & right-hand T-slot miters. -- 16" Blade dia., 4" dado width cap.; 4" cut depth at 90°; 3" cut depth at 45°. -- Equipped with: Taper pin miter with micrometer adjustment on fence, magnetic controlled off switch, and 6" dust outlet with auxiliary rear opening for easy access. -- Power safety electrical breaker box included. Please NOTE: No blade guard.

16" Blade cap., 3-3/4" max. cutting height, 5 HP - 3,600 RPM direct drive motor, arbor tilts 45ø, 44" x 40" cast iron table size, table with miter gauge slot. -- Complete with: Rack & pinion fence and large hand wheels for easy adjustments.

Runs good and is still in operation Hooked up to 460 Table Extension has been repaired Main table has almost zero wear on it.

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYOR 16-Section Clamp Carrier 20.5' width cap., (7) clamps per section (128 clamps total). .48" max. clamp opening clamps with 4-1/2" X 3 1/4" jaw height (128) Rocker plates 4" X 6" @ 80-1706 (purchase in June 2024)Complete with: -- Semi-automatic clamp tightening, -- (2) Air drive carrier rotation. -- (2) Pneumatic panel flattener -- OAL approx. 24' X 14' X 12'Note: The buyer will be responsible for tear down and loadingMachine model CC 20,5-16-481

Capacity: 36,000 lbs @ 48" LC. Mast: 18 ft mast. Forks: 8ft. Tires: Solid Pneumatic. Engine: Cummins Diesel. Attachment: Side shift, fork positioner. Hours: 10,500 and 12,700. Great Shape. Call for delivered price.

(3 units). Capacity: 18.000 lbs. Mast: 112" / 132" Two-stage mast. Tires: Solid Pneumatic. Hours: 9.087, 13.629 and 11.359 Attachment: Side Shift, Fork positioner. Engine: Diesel. Notes: Full Cab with A/C and heat. Call for delivered price

Capacity: 50,000 lbs @ 50in LC. Hours: 10,727. Mast: Two-stage ultraview mast (197"/216"). Forks: 100" (3.3" x 14" x 100") Attachment: Side Shift and Fork Positioner. Engine: Cummins QSL9 TIER 4F. Dana TE-17 3-Speed powershift Transmission. Call for delivered price.

Capacity: 100,000 lbs @ 48" LC. Hours: 18,953 hours. Cummins QSX15-C400HP Tier III TPEM Electronic Turbocharged w/fuel cooler. Powershift Transmission - 4 speed w/Declutch. Modulated, Electric Shift Control and APC-120 with push button transmission shifting on joystick mounted on the right side of the seat. Rigid Ultra-VU 24, 97" Log Clamp Carriage with Kickers and 108" Forks. Note: Good Running conditions and ready to work. Call for delivered price.

Capacity: 80,000 lbs @ 48" LC. Hours: 13,200 hours. Tires: Pneumatic tires. Fuel: Diesel. Mast: 216" two-stage mast. Forks: 8 ft forks. Attachment: Side Shift and Fork Positioner. Notes: New paint. Call for delivered price.

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

Taylor Forklift tight machine