Equipment For Sale

Tigercat 240B with Washer Saw Still under power and available for inspection.

2013 Tigercat 234 Loader

2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.

2018 Tigercat 250D -10,807 hours -Tight and dry -Turntable is tight -Tires and lights are good -Delimber Woods ready

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 880 Tigercat log loader 16- square grapple. Hoe chuck grapple also available. New grapple has less than 2,000 hours and cost almost a hundred thousand dollars and works awesome! 8,200 hrs.

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

2017 Tigercat 234B -12170 hours -New crate motor 1000 hours -New hydraulic pump 1500 hours -Def deleted -Ground saw -Csi 264 delimber -New bucket jaws -New bucket cylinders One Owner

2020 Tigercat 724g -6115 hours -Tigercat 5600 head -Disk is in good shape -30.5 32 tires 75% tread -Tight and dry -Clean machine.

2013 Tigercat 620D -13600 hours -New hydrostats and pumps 14 months ago -44x73 tires -Tight and dry -Winch

2018 Tigercat 720G -6789 hours -5600 head -Disk @50% -Tight and dry -Tires @50% -One owner

1999 Tigercat 726B Feller Buncher, 9700 Hours, New Cummins 8.3 Remaned Engine with Low Hours, All Cylinders Repacked, Enclosed Cab with Heat, Tires are 30.5 x 32 Center Section is Good. Ready for the Woods Length 20 ft 0 in Width 9 ft 9 in Height 11 ft 0 in Weight 28,040 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Tiger Cat LSX870D -3432 hours -Leveling cab -Grapple being rebuilt -Tight and dry Clean machine!!!!

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.