Multiscore Gang Saw For Sale

Gang Saw 

Air Compressor (106) Airlock (19) Band Chopper (1) Band Mill Thin Kerf (22) Band Mills (Wide) (24) Banding-Strapping Machines (82) Blowers and Fans (109) Boiler (13) Bolter Saw (1) Carriage (Sawmill) (42) Carriage Drive (Sawmill) (37) Chip Bin (15) Chip Cyclone (5) Chip Screen (28) Chipping Canter (1) Chop Saw (28) Circular Saw Husk (9) Circular Sawmill (61) Conveyor (57) Conveyor-Auger (4) Conveyor-Live Floor (5) Conveyor-Run-Around (1) Conveyor-Vibrating (75) Conveyors Belt (181) Conveyors Board Dealing (61) Conveyors Decks (Log Lumber) (197) Conveyors General (27) Conveyors-Barn Sweep (15) Conveyors-Live Roll (127) Debarker (52) Dip Tank (5) Drum Dryer (13) Dry Kiln (12) Dump Hopper (12) Dust Collection System (213) Edger Tailing Device (2) Edgers-Board (56) Edgers-Gang (37) Edgers-Slab (2) Edgers-Vertical (5) Electrical (108) Forklift (49) Gang Rip Saw (34) Gang Saw (38) GenSet (54) Hammer Mill (3) Hogs and Wood Grinders (132) Hydraulic Power Pack (66) Knife Grinder (26) Laser Lights (5) Log Home Machinery (2) Log Irrigation (2) Log Merchandising System (14) Log Turner (Sawmill) (23) Lumber Stacker (27) Lumber Sticker (2) Metal Detector (19) Misc (61) Operator Cab (8) Package Saw (5) Portable Sawmill (26) Post and Pole Peeler (21) Power Units-Engines (14) Radial Arm Saw (3) Resaw-Band (137) Resaw-Circular (2) Scissor Lift (36) Scragg Mill (28) Screening System (1) Setworks-Sawmill (4) Shaper (5) Sharpening Equipment (87) Shavings Bagger (4) Shavings Mill (27) Slab Saw (3) Stake Pointer (2) Stave Quartering Saw (1) Tie Processing (3) Trimmer (71) Unscrambler (32) Wheel Loader (66) Wood Chipper - Stationary (111) Wrap and Packaging (10)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
5 Results Found
Sort By 
Recently Added Items
Jenkins 192-SB
$19,000
Jenkins 192-SB
Ligna TA836
$40,000
Ligna TA836
2018 Ligna
$210
2018 Ligna
STANDARD LISTINGS
2003 Multiscore CD-4  Gang Saw
$19,800

MULTISCORE CD-4-30 Cabinet Groover/Bead/Multi-Blade Saw. Overall Specs: 30" Wide x 50" long max. cap., 1" max. material thickness; 30 HP main motor, 3-15/16" dia. arbor @ 3,500 RPM, aluminum bed plate slotted at 1.5" spacing for about (20) tool positions, quick release tensioner on the arbor drive belts. -- Equipped with: Feed system consists of a reciprocating push fence with wood extension fingers to assure consistently square cuts; push fence carries the part thru the entire cutting area completely past the arbor. Extension fingers are laterally adjustable for different cut widths. Pneumatic infeed plastic holdover fence laterally adj. to hold parts up against the fence. (8) Hold down arms with lat. & vert. adj. mount to 'T' slot rack to press parts against the feed table during machining. -- Feed Drive/Speed: 2 HP - 1,750 RPM AC Inverter Variable feed motor via gearmotor, with dynamic brake, 0 - 60 FPM. -- Features: Material is pushed off the exit side while machine operator can load new parts at the infeed table. Cutterhead assembly is end supported, adjustable up & down via handwheel, and jam-nut tooling locking system. -- Includes: Mounted (16) Split Multi Bead Cutters, 8" x 12T with mounting hubs included. 10" Dia. pipe requires approx. 3,000 CFM dust collection, 80 PSI compressed air supply.

Bob Bullin
800-374-5009 ext:346
Call

Multiscore MR-21-50  Gang Saw
$19,900

MULTISCORE MR-21-50 MULTI-BLADE PANEL SAW: -- Specifications:50" Width Cap., 20 HP - 3,500 RPM belt driven bottom mounted arbor, 3-15/16" dia. arbor, end supported and vertically adjustable,1-1/2" Max. depth of cut & 2-1/4" minimal blade spacing. -- Feed System:Roll feed with (1) set of infeed top & bottom feed shafts with 2" wide x 6" dia. Neoprene covered feed wheels, (6) each shaft.(1) Set of out-feed top & bottom feed shafts with 2" wide x 6" Dia. Neoprene covered feed wheels, (6) each shaft. -- Feed Speed:2 HP, 1,750 RPM - Hydraulic drive motor; fixed speed at 70 FPM. -- Complete with:Overhead hold-down pressure wheel assembly in saw blade area, all feed wheels chain driven with air tensioning.10" dia. dust collection outlet (3,000 CFM required). -- Options Include:(9) Used split saw blades, (6) Split-Blade collars, (6) Aluminum throat plates & (2) Neoprene covered wheel hubs, all as pictured. -- Actual Model is MULTISCORE MR-21-50

Bob Bullin
800-374-5009 ext:346
Call

Multiscore MR-21-62  Gang Saw
Call for Price

MULTISCORE MR-21-62 MULTI-BLADE PANEL SAW: -- Specifications:62" Width Cap., 60 HP - 3,500 RPM belt driven bottom mounted arbor, 3-15/16" dia. arbor.Manual vertical adjustment for up to 1-1/2" max. depth of cut, blade collars are fully adjustable with 2.25" min. spacing. -- Feed system:Adjustable powered in-feed top & bottom urethane covered hold-down feed rollers,Adjustable powered out-feed top & bottom urethane covered hold-down feed rollers,Adjustable powered overhead hold-down pressure wheel assembly in saw blade area.All feed wheels are chain driven with air tensioning. -- Feed Speed: 2 HP - 1,750 RPM feed motor, variable feed speed 20 to 100 FPM; -- Complete with:(2) 10" Dia. dust collection outlet (3,000 CFM required). -- Options Include:Some used blades, (17) blade collars & (17) aluminum throat plates. -- Actual Model is MULTISCORE MR-21-62

Bob Bullin
800-374-5009 ext:346
Call

Multiscore MR-21-62  Gang Saw
$10,000

MULTISCORE MR-21-62 Panel Rip Saw: -- Specifications:62" Width Cap., 20 HP - 3,500 RPM belt driven bottom mounted arbor, 3-15/16" dia. arbor, end supported and vertically adjustable,Blade collars are fully adjustable with 2-1/4" min. spacing & 1-1/2" max. depth of cut. -- Feed system:Roll feed with (1) set of infeed top & bottom feed shafts with 2" wide x 6" dia. urethane covered feed wheels, (8) each shaft,(1) Set of outfeed top & bottom feed shafts with 2" x 6" dia. urethane covered feed wheels, (8) each shaft. -- Feed Speed: 1 HP - 1,750 RPM feed motor, variable feed speed 20 to 100 FPM,(1) Overhead hold-down pressure wheel assembly in saw blade area, all feed wheels are chain driven with air tensioning,. -- Complete with:10" dia. dust collection outlet (3,000 CFM required). -- Options Include:(20) saw blades and collars. Actual Model is MULTISCORE MR-21-62

Bob Bullin
800-374-5009 ext:346
Call

Multiscore MR-23-62  Gang Saw
Call for Price

MULTISCORE MR-23 "HEAVY DUTY" MULTI-BLADE PANEL SAW: -- Specifications:62" Cap., 75 HP - 3,500 RPM, 3.97" dia. arbor; Blade collars are fully adjustable with 2.25" min. spacing & 1.5" max. depth of cut.Includes air lifting of arbor motor and quick release arbor bearings for speedy arbor/blade change-overs. -- Feed system:((1) 1.5 HP - 1,750 RPM feed motor with variable feed speed 50 to 150 FPM.(1) set of continuous powered rubber coated in-feed & out-feed roller shafts; (1) Continuous overhead hold-down pressure roller assembly in saw blade area,All feed roller shafts are chain driven with air tensioning in lieu of troublesome springs. -- Complete with: 10" Dia. dust collection outlet plenum (3,000 CFM required). -- Options Include:(19) blades, (19) collars & (14) aluminum throat plates as pictured. -- Actual Model is Multiscore MR 23 62

Bob Bullin
800-374-5009 ext:346
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved