Equipment For Sale

2008 International Maxx Force Chip Truck, Automatic Transmission, Under CDL. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 INTERNATIONAL PAYSTAR 5600 6 AXLE LOG TRUCK CUMMINS 18 SPEED SERCO 8500 LOADER FRAME IS CRACKED ON BOTH SIDES IN PICTURES

6 cylinder, 210 hp, 3000 hrs. NPT clutch, murphy switch panel, air filters, muffler, ready to go to work.

!!!!!!! PRICE DROP !!!!!!! 2000 International 4700 Flat Bed Dump Truck with a 7.3 L diesel engine, standard 5 speed. Truck has 152,000 miles on it. Had a different engine installed a few years ago replaced do to running it out of oil. Truck runs and dumps great. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 International 4600 LP -Single axle -Allison auto -Non Cdl -Hydraulic Brakes -T444e diesel Had truck running and driving will not restart Electrical or fuel issue

Double Frame Seven Axel 18 Speed Locking Axels Air Z Spring Suspension 520K Miles Serco 8500 28 'Boom new remand injectors new high pressure fuel pump new air compressor new radiator New fan clutch

2005 INTERNATIONAL 5900I LOG TRUCK 406,515 MILES ISX CUMMINS 525 HP NEW 18 SPEED TRANNY NEW RUBBER BLOCK SUSPENSION 46K REARS FULL LOCKERS SERCO 8000 LOG LOADER 24' LONG BED FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

1999 International Log Truck Cat 3406E 18 speed 500k miles Serco 7500 loader Still hauling logs

International S2500 Log Truck 13 speed Lift axle Dayton wheels 11-22.5 tires are good 21' bed Work ready VIN 1HTZPJUR5GHA17203

1979 International DT466 8 speed Runs good Complete truck No title

1985 Internation DT 466 Dump Truck Work Ready

2000 International F2574 6X4 Truck mounted with a Big John Model 80 Tree Transplanter with 43,933 miles and 3,597 engine hours. Rebuilt lift & cylinders, low mileage tires, A/C Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

IBC - NA-1296A-48: Horizontal Closed-Door Baler Model -- 50 HP Motor. -- Main Cylinder: 10″. -- Bale Size: 30″ x 45″ x 60″. -- Hopper Size: 57″ L x 45″ W. -- Platen Pressure: 134 PSI. -- System Pressure: 3,000 PSI. -- Total Force: 235,620 Lbs. -- New cylinder installed approximately (6) months ago.

IBC - "IBC 4343 X 8 – 50 - 63": Horizontal Auto-Tie Baler -- Model: AT-4343-8-50-63. -- Type: Auto-Tie Baler. -- Motor: 50 HP. -- Cylinder Bore: 8";. -- Bale Size: 43"; x 43"; x Variable. -- Manufacturing Date: 2009.

Interwood B3223 Boring Machine 23-Spindles Manufacturer Specs (to be confirmed): (2) 1.5kw, 220/380v, 3ph motors (2) banks of (23) drills 32mm drill spacing (8) spring hold downs (2) pneumatic locators 50-1/2 inch x 30 inch table Pneumatic operation / foot pedal

INTERWOOD C-4010 CASE CLAMP: -- Specifications:Single-Bay pneumatic Clamp with: 108" Long x 60" high x 27" deep clamping cap. -- Equipped with:Movable; vertically positioned clamping beam with (2) adjustable horizontal clamps; (3) adjustable vertical clamps.Horizontal & vertical clamps with: (2) Pneumatic cylinders ea. for a total of (10) pressure cylinders with 2-3/4" stroke. -- Complete with:Built-in Horizontal/Vertical controls with pressure gauges.700 Lbs/Cylinder pressure at 100 PSI compressed air.

INTOREX HB-65 Automatic Dowel Milling Machine. For round dowels, table legs, broom handles, agricultural tool handles (concentric), umbrellas, stair rails, etc.Specifications: -- Automatic machine for rounding square stock with a cutter head that has (3) tools and finished diameters between 15 and 65 mm (3/32" to 2-1/2"). Unlimited working length. -- The head drive is 8.5 KW (10 HP). -- Working advance speed adjustable between 8 and 30 meters/Min. (26.25 to 98.5 FPM.) by means of a potentiometer. -- The machine has (4) draw-in rollers and (4) draw-out rollers to guarantee the uniform advance of the bar and good finish quality. -- INTOREX is designed and quality-built in Spain. -- Dimensions: 1500 mm (59.1" long x 1200 (47.3") wide x 1400 ( 55.2") high. Approx weight 850 Kg (1870 Lbs).

INTOREX TX-1300 Hydraulic Copy Lathe Hopper Feed. Overall Specs: -- Full automatic, equipped with (2) hydraulic copiers, (2) tool holder units, (2) back knives, Hopper Feed, Automatic Loading System. and electronic PLC control. Carriage runs on ball screw and tempered/ground guides. -- 1,600 mm (63") Max. between centers; hopper loading capacity of 140 x 140 mm (5.5" sq.) in automatic cycle and 210 mm (8.3") diameter in semi-automatice cycle. -- 10 HP Main motor with a variable speed of 730 - 5100 RPM; 3 HP hydraulic power pack. _ Fitted with PLC programmed logic to assist in setup; All working units (advance carriage, tailstock, tool holder units, etc) are hydraulically powered with independently adjustable speeds. -- Copying system with (2) hydraulic copier knives and traveling steady rest; includes a pre-rounding knife in front of steady; hydraulically powered back knives for doweling or plugging with form tools. -- Includes: Tooling, front safety guard; front mounted electrical panel with easy access to all pushbuttons and controls, and LED RPM display.