Mobile Wood Chippers For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 6
117 Results Found
Sort By 
Recently Added Items
Morbark Series 1000
Call For Price
Morbark Series 1000
2023 Bandit 2590
$505,000
2023 Bandit 2590
PREMIUM LISTINGS
$ 65,000

1979 Morbark 22 chipper with slide boom. Rebuilt KT600 motor. Low hrs. Hydraulics good. New clutch, upper and lower belly pan, faceplate, 2 paddles, sprockets. Liner redone. Cat chain is 50%. Liner in throat redone. Whole tree chipper 1x 3/4 chip. Sandblasted and painted. Tires hold air and are 50%. Cell 315-796-7450

 Port Leyden, NY
McIntyre Logging
315-796-7450
Call

$ 285,000

2012 Morbark 30/36 Chipper aka The Mountain Goat -4145 hours - C-18(500H.P) -Advantage 3 Drum -Grapple -Wireless remote -Grapple unit -Auto clutch -New belts -Serviced Regularly

Josh Digirolamo
828-302-7264
Call

$ 400,000

2022 Morbark 30/36 Tree Chipper Serial No. 466-1299. Model 30/36 Towable Whole Tree Drum Chipper, Advantage 3 Series Drum, Cat C15 600 HP Engine. 11.5’ Infeed Conveyor Sloped with 2-Strand Chain (for aggressive feeding), Direct Flow Chip Discharge with Hydraulic Chip Deflector, Wireless Remote, Tandem Axle. Engine is still under factory warranty. Hours: 1,550. Location: Schuylkill Haven, PA Asking Price: $400,000.00

 Schuylkill Haven, PA
Nassau Asset Management
516-345-6306
Call

STANDARD LISTINGS
Call for Price

New In Stock Bandit 3090 Tracked Whole Tree Chipper.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 182,900

2012 Bandit 3090 Tree Chipper 24" Diameter Capacity 26" x 36" Opening Cummins 600 HP Only 700 Hrs New Drive New Pump New Hoses New Belly Plate New Auto Feed

Mitch Stevens
828-773-6986
Call

Call for Price

New Bandit 2290 Tracked Whole Tree Chipper, In Stock for Sale or Rental.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

2019 Bandit Intimidator 15XPC Brush Chipper, Gasoline Engine, Trailer Mounted, Hour Meter Reads: 512

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

2005 Bandit 2400T Whole Tree Track Chipper , Only 3,021 Original Hours, Undercarriage is 95% Enclosed Operators Cab with Heat and Cold Air, Caterpillar 765 HP Turbo Diesel Engine, Cat Infeed Chain with 4 Roller Feed System., Autofeed , Hydraulic Swivel Discharge, Hydraulic Flapper Engine Pre Cleaners Hydraulic Oil Coolers Rotobec 360 Degree Grapple... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Hammonton, NJ
NEF Equipment
855-251-2648
Call

$ 19,900

1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

Call for Price

2013 Bandit 3090 4,600 hours on the Cat C18 765 HP Engine, Tires are 11R x22.5 length of unit 39'7" width 9'9" Height 12'4" weight 54000 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Keene, NH
NEF Equipment
855-251-2648
Call

Call for Price

2013 Bandit 2290 20” Drum Whole Tree Chipper, 440 Cat Diesel with 3,045 Hours, Tether Remote and New Radio Remote, 5 1/2’ Infeed Conveyor, Babbited Knives, Light Package, Dual Stabilizer... Popular for its great combination of size, production, performance and price, the 20-inch capacity Model 2290 whole tree chipper is a favorite for chipping tops and brushy material, either in traditional logging operations or land clearing projects. Its 24.5-inch by 26.25-inch throat opening easily accepts large diameter, brushy material. Dual feed wheels in Bandit’s unique Slide Box Feed System provide the industry’s best pulling and crushing power, while aggressive chip throwing power fully loads trailers in approximately 35-40 minutes. Length: 21’ 640.08 cm Width: 10’ 2” 309.9 cm Height: 11’ 6” 350.5 cm Weight: 40,000 - 46,000 lbs (18,143.7 - 20,865 kg) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Williston, FL
NEF Equipment
855-251-2648
Call

Call for Price

2006 Bandit 200XP 12 inch disc chipper with 86 hp Cat engine, winch, auto feed, hand crank swivel discharge chute, heavy duty aluminum fenders tool and battery boxes. New knives and anvil excellent condition Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

Call for Price

2012 Bandit 200XP with 86 hp Cat Diesel with auto feed and height adjustable discharge. Width. 72 in. 182.90 cm. Height. 100 in. 254 cm. Length (Open) 202 in. 513 cm. Weight. 5500 lbs. 2494.76 kg. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 18,500

2008 Bandit 200XP 86 hp Perkins Diesel. Yellow 12” Disc Brush Chipper. Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 18,500

2007 bandit 200XP 86 Cat diesel engine, Red 12” Disc Brush Chipper Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 159,900

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Winchester, VA
NEF Equipment
855-251-2648
Call

$ 69,900

2004 Bandit 1850 Whole Tree Chipper Deere 325HP Turbo Engine, Engine had a complete engine rebuild 500 Hours Ago, 360 Degree Grapple Rotation, Heat and Ac in Cab Ac is not hooked up, ONLY 6,100 Original Hours, Joystick Controls. Length 282” Width 102” Height 156” Weight 20,000 lbs.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

Call for Price

2004 Bandit 1390 15 inch drum chipper with 142 hp Cat tier 3 engine winch lift cylinder (crusher) on top feed wheel. Auto feed, hydraulic swivel and height adjustable discharge chute. New tires, new knives and anvil 4,500 hours LENGTH (CLOSED): 188” LENGTH (OPEN): 218” WIDTH: 81” HEIGHT: 110” WEIGHT: 7,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

Call for Price

2023 Bandit 2590 Track Whole Tree Chipper, Equipped with a Caterpillar C-18 755 HP Diesel Engine, ONLY 150 Hours, Air Compressor, Radio Remote Control System, 22" Whole Tree Chipper, Infeed Chute is 7.5'' Long, Caterpillar 4 Year Warranty and Bandit 1 Year Warranty in Effect. Ready for the Woods. Width. 10' 2" Height. 12' 8" Length. 38' 5" Weight. 44,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Hammonton, NJ
NEF Equipment
855-251-2648
Call

$ 15,500

2005 Bandit 150 Chipper 7300 hours Deutz intercooled engine No blow by New teeth New drum bearings New springs Good tires Work ready REDUCED

Mitch Stevens
828-773-6986
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved