Meadows Mills For Sale

Mobark 1400 Tub Grinder, used for municipal waste only, in very good condition, turn key operation. $120,000

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 44' Vibratory Conveyor. Located in WI. #C898

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

2017 Morbark 1300 Tub Grinder, Cat C27 1050hp with 7,400 hours, Air Compressor, Loader, Magnetic head pulley. Weight 88,000 lbs Height 13' 6" Width 11' 11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark 50/48X -5,591 hours -Brand new wet clutch -New gearbox -New EGR Cooler -The drum has new knife holders, clamps, and bolts. -Comes with 5 sets of knives and 2 sets of counter knives Hours will rise as it is a working unit!!!!!!

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Morbark Stac-Trac 1000 Track size: 30’, overall height: 9’ Drive: 15hp. good shape and maintained. Lots of spare parts included. SPECIFICATIONS 1000 Stac Trac Specifications Power 15-hp electric Track Speed 211 fpm Grapple Opening 1.375" – 18" Weight 4,700 lb Boom Swing 360 degrees Manpower Required one operator Standard Track 30' Lifting Capacity 1,480 lb

2007 Morbark 40/36 Whole Tree Chipper, 600hp Deere with 8994 hours, A3 Drum, Light package, Remote, Rear stabilizers. Length 37'5" Height 12'4.25" Width 8'6" Weight 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark MXG42 Wheeled Stump Grinder, 399 Hours.

1996 Morbark 1200 -CAT motor approximately 3500 hours -Motor was replaced at 7000 hours -Engine runs great -Rollers and the Chain that turns the Tub need some work -Have the rollers for it Budget Grinder !!!!

2024 Morbark 1821 Eeger Beaver Wood Chipper, 165hp Ford Gas Engine with 69 hours, Winch, Lift Cylinder, Hydraulic Turn Discharge, Like new with Warranty, Excellent condition. Weight 8,900 lbs Height 8'11" Width 7'3" Length 18'1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT Platinum engine warranty until 6k or Feb 2026. C27 1050 HP, Remote working in woods – hours will go up.

Morbark vibrating conveyor

2018 Morbark 1300B Tub Grinder with 3,800 hours. Length: 45 ft Height : 13 ft 6 in Width: 11 ft 11 in Gross weight (NCL): 74,580 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 | 6" – 40" diameter capable | Includes 3-strand log infeed deck w/stop and load, log infeed trough, debarking center w/cab & controls, bark removal system, log outfeed trough w/3 arm kicker. MIT-SA Carousel block cutting saw w/ belt

Unit will be serviced and ready

16' Log Trough with Kicker. #00890

The Morbark 950 Tub Grinder is a reliable choice for handling your grinding needs, equipped with a powerful Cat C8.8 engine. With 3525 hours of operational use, this unit has been maintained in good working condition, offering efficiency and reliability for a range of applications. Ideal for industries requiring heavy-duty grinding capabilities, the Morbark 950 is designed to handle various materials efficiently. This used grinder provides excellent value for money, with a recently reduced price enhancing its appeal. It's a dependable machine for professionals seeking quality and performance in their operations.

2012 Morbark 30/36 Chipper aka The Mountain Goat -4145 hours - C-18(500H.P) -Advantage 3 Drum -Grapple -Wireless remote -Grapple unit -Auto clutch -New belts -Serviced Regularly