Marathon Strapping Machines Banding For Sale

Banding-Strapping Machines 

Air Compressor (112) Airlock (18) Band Chopper (1) Band Mill Thin Kerf (28) Band Mills (Wide) (28) Banding-Strapping Machines (83) Blowers and Fans (107) Boiler (9) Bolter Saw (1) Carriage (Sawmill) (42) Carriage Drive (Sawmill) (37) Chip Bin (16) Chip Cyclone (4) Chip Screen (28) Chipping Canter (1) Chop Saw (28) Circular Saw Husk (9) Circular Sawmill (66) Conveyor (61) Conveyor-Auger (3) Conveyor-Live Floor (5) Conveyor-Run-Around (2) Conveyor-Vibrating (69) Conveyors Belt (178) Conveyors Board Dealing (71) Conveyors Decks (Log Lumber) (193) Conveyors General (26) Conveyors-Barn Sweep (14) Conveyors-Live Roll (130) Debarker (59) Dip Tank (6) Drum Dryer (12) Dry Kiln (13) Dump Hopper (12) Dust Collection System (222) Edger Tailing Device (2) Edgers-Board (58) Edgers-Gang (37) Edgers-Slab (2) Edgers-Vertical (5) Electrical (108) Forklift (49) Gang Rip Saw (44) Gang Saw (38) GenSet (62) Hammer Mill (2) Hogs and Wood Grinders (140) Hydraulic Power Pack (67) Knife Grinder (27) Laser Lights (5) Log Home Machinery (3) Log Irrigation (2) Log Merchandising System (15) Log Turner (Sawmill) (22) Lumber Stacker (27) Lumber Sticker (2) Metal Detector (19) Misc (62) Operator Cab (7) Package Saw (6) Portable Sawmill (27) Post and Pole Peeler (20) Power Units-Engines (12) Radial Arm Saw (3) Resaw-Band (141) Resaw-Circular (2) Scissor Lift (37) Scragg Mill (33) Screening System (1) Setworks-Sawmill (4) Shaper (5) Sharpening Equipment (90) Shavings Bagger (3) Shavings Mill (28) Slab Saw (2) Stake Pointer (1) Stave Quartering Saw (1) Tie Processing (3) Trimmer (76) Unscrambler (36) Wheel Loader (83) Wood Chipper - Stationary (110) Wrap and Packaging (11)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
15 Results Found
Sort By 
STANDARD LISTINGS
Marathon 3560  Banding-Strapping Machines
$39,950

MARATHON 3560 HORIZONTAL CLOSED DOOR BALER -- Model Gemini -- 20 HP motor -- (2) 6" Cylinders -- 35" x 57" Feed opening -- New Cylinders (6 months ago) -- New top plate -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

Marathon 3560  Banding-Strapping Machines
$42,900

MARATHON GEMINI 3560 CLOSED DOOR HORIZONTAL BALER -- REFURBISHED -- Model 3560 GEMINI CLOSED DOOR -- FULL PEN BALER -- (2) 6" NEW Cylinders -- Feed opening 35" x 57" -- New cylinders/New floor -- New Prox. sensors & switches -- Motor, motor starter, pump, all tested -- Price includes; New side feed flared hopper -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

Marathon 3560  Banding-Strapping Machines
$49,950

MARATHON GEMINI 3560 HORIZONTAL CLOSED DOOR BALER -- Cycle time: 34 seconds -- Horsepower: 20 -- Twin bore cylinders:Diameter: 6 inches each.Rod: 40 inches,Stroke: 57 inches -- Full eject -- Bale weight: up to 1,250 pounds -- Bale size (inches): 60 long x 30 wide x 48 high -- Infeed opening (inches): 58 x 35 -- Maximum platen force: 120,000 pounds -- Maximum platen pressure: 68 psi -- Oil reservoir capacity: 100 gallons -- Pump capacity: 34 gallons per minute -- Approximate overall dimensions (inches): 148 long x 87 wide x 52 high -- LOADED ON YOUR TRUCK.

Michel Hamel
800-374-5009 ext:472
Call

Marathon ES-5042-8-R  Banding-Strapping Machines
$84,900

MARATHON/NEXGEN ES-5042-8-R HORIZONTAL AUTO-TIE BALER -- 50 HP motor -- Upgraded to 9" Cylinder -- Feed opening 50" x 42" -- 48" Wide belt conveyor with 2" cleats every 36" -- Conveyor can be ground or in ground -- 10' Lower horizontal section -- With Fluffer -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2014 Marathon GEMINI EXTREME  Banding-Strapping Machines
$39,900

MARATHON GEMINI EXTREME HORIZONTAL CLOSED DOOR -- Full eject -- 20 HP motor -- Twin 6" cylinder -- Feed opening 35" x 57" -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2007 Marathon PC-4430-730  Banding-Strapping Machines
$54,900

MARATHON PC4430-730R HORIZONTAL AUTO-TIE BALER -- 30 HP motor -- 7" Cylinders -- Feed opening 44" x 28" -- Bale size 40" x 30" x variable -- L/H Controls -- Color PLC Screen

Michel Hamel
800-374-5009 ext:472
Call

2007 Marathon PC-4430-730  Banding-Strapping Machines
$29,900

MARATHON/NEXGEN BALING SYSTEMS PC-44-30-7-30R 30 HP Horizontal Auto-Tie BalerProcess Capacity: -- Shredded & air-conveyed recyclable material weight capacity: 4 or less Lbs. per cu. ft. infeed density. -- Production rates: 4.2 Tons/Hour, 1-Lb./cu. ft. at 55% Efficiency, 37 Lbs. per charge; 7.2 Tons/Hour, 2-Lbs./cu. ft. at 47% Efficiency, 74 Lbs. per charge; 9.2 Tons/Hour, 3-Lbs./cu. ft. at 40% Efficiency, 111 Lbs. per charge; 10.1 Tons/Hour, 4-Lbs./cu. ft. at 33% Efficiency, 146 Lbs. per charge.Specifications: -- Infeed opening size 44” L x 28” W. -- Charge box volume 37 cu. ft. -- Charge box door opening size 22-1/2” W x 33-1/2” H. -- Bale size 30” x 42” x variable. -- Bale weight at 72” Up to 1,600 Lbs. -- Bale density Up to 32 Lbs./cu. ft. -- Cycle time (no load) 8.6 seconds (includes 1-1/2 seconds for decompression). -- Cycles per min 6.9. -- Bore diameter 7”. -- Stroke 58”. -- Cylinder rod diameter 5”. -- Operating pressure 3,000 Lbs., 105 PSI. -- Compressing force 115,454 Lbs. -- Tension force 630,940 Lbs. -- Displacement 15,400 cu. ft./hour.Equipped with: -- 30 HP - 73 GPM Hydraulic unit. -- 5-Tie Gear driven twister, Wire sizes 12 ga, 11 ga, 10 ga, Tie cycle time 25 seconds. -- FLEX-TEN System (leverages pressure on sides, top & bottom creating friction resistance for generating maximum density). -- ALLEN-BRADLEY “PANELVIEW 600” Touch screen color graphic terminal. -- Replaceable liners. Dimensions 274 "L x 168 "W x 96 "H.

Michel Hamel
800-374-5009 ext:472
Call

1995 Marathon SE-504242-830  Banding-Strapping Machines
$29,900

MARATHON SE-504242-830 SIDE EJECT HORIZONTAL BALER -- 30 HP motor -- 8" Cylinder -- Feed opening 50" x 42" -- Bale size 42" x 42" x 72" -- Bale weight 1600/1800 lbs -- Platen force 125,700 lbs -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

Marathon SE-504842-830  Banding-Strapping Machines
$39,900

MARATHON NEXGEN SE-504842-830 SIDE EJECT HORIZONTAL BALER -- 30 HP motor -- 8" Cylinder -- Platen force 127,800 lbs -- Feed opening 50" x 48" -- Finish bale size 48" x 42" x 72" -- Dimensions; 20'10" x 92" high X 77" wide -- Weight 18,700 lbs -- LOADED ON YOUR TRUCK

Michel Hamel
800-374-5009 ext:472
Call

Marathon SE-504842-830  Banding-Strapping Machines
$39,900

MARATHON/NEXGEN SE-504842-830 SIDE EJECT HORIZONTAL BALER -- Bale size 48" x 42" x 72" -- Bale weight up to 2,000 lbs (OCC) -- 30 HP motor -- Feed opening 46" W x 50" L -- 8" Cylinder bore x 4.5" rod x 68" stroke -- Lockable fused disconnect in panel -- Cycle time 20 sec. (no load) -- Platen force 125,700 lbs -- Oil reservoir 150 gallons (Oil included) -- Door lock: hydraulic (included) -- Liners; Standard abrasion resistant (Included) -- Shipping weight 18,700 Lbs. -- Loaded on your truck -- There are (2) units available, price is per unit.

Michel Hamel
800-374-5009 ext:472
Call

2008 Marathon STEALTH  Banding-Strapping Machines
$29,500

MARATHON STEALTH CLOSED DOOR HORIZONTAL BALER -- 20 HP motor -- 6" Cylinder -- Ram force 67,900 lbs -- Feed opening 60" x 48" -- Will make up to 1,400 lbs OCC bale -- Lower Photocell for auto-cycle -- Equipped with conveyor control switch if you wanted to add a conveyor -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

Marathon TR-10/75  Banding-Strapping Machines
$115,000

MARATHON TR-10/75 2 RAM AUTO-TIE HORIZONTAL BALER -- 75 HP motor -- 10" Main Ram -- 8" Eject Cylinder -- Total ram force 235,600 lbs -- Feed opening 40" x 70" -- Dual Shear Blades -- GE Programmable Controller -- Baler length 29' x 8' x 8', weight 52,000 lbs -- Ejector ram 6' x 6'3" x 4', 6,000 lbs -- Power unit 8'10" x 4'6" x 7', 7,000 lbs -- LOADED ON YOUR TRUCK

Michel Hamel
800-374-5009 ext:472
Call

2013 Marathon WC-150-72-30  Banding-Strapping Machines
$77,900

MARATHON NEXGEN WC-150-72-30 AUTO-TIE WIDE MOUTH HORIZONTAL BALER -- Feed opening 39" x 72" -- 30 HP motor -- 8" Cylinder -- Automatic wire tie -- PLC control -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2007 Marathon WS-50-42-8-50  Banding-Strapping Machines
$47,900

MARATHON WS-50-42-8-50 AUTO-TIE HORIZONTAL BALER -- 50 HP motor -- 8" Cylinder -- Feed opening 50" x 42" -- Auto-tie system -- Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

2016 Marathon WS150  Banding-Strapping Machines
$94,500

MARATHON WS150 WIDE MOUTH HORIZONTAL BALERA just about like new Baler; -- Auto-tie model -- 30 HP motor -- 8" Cylinder -- Feed opening 40" x 60" -- Oil cooler -- Bilingual Color Touchscreen Operator Interface -- Ethernet Remote Diagnostics -- Above ground slider belt conveyor 48" wide -- The baler is less than (2) years young and in great shaperPrice includes Loaded on your truck

Michel Hamel
800-374-5009 ext:472
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved