Equipment For Sale

2023 Tigercat 610E, 4200 hrs., Dual Arch Grapple, remaining warranty, new rubber, $225,000

This machine is tight in great condition and ready to do it's job at peak performance. With only 6,300 hrs on it, it has a lot of service life left in it. It has been deleted good tires, no leaks visible. for more information or to view you can come to 467 Saint Peter Street State Line, MS 39362 or text Tim 251-366-3237 Kameron 251-242-5493 Gavin 601-394-7796

Tigercat 630B Skidder Motor exchanged a year ago Tight machine 80% tires No leaks Winch Grapple

2011 TIGERCAT 610C GRAPPLE SKIDDER 14,000 FRAME HOURS 2,500 ON NEW ENGINE RECENT FRONT DIFFERENCIAL TIRES IN FRONT ARE @90% REAR TIRES ARE @70% REBUILT REAR AXEL RECENT AC HEAT AND RADIO WORKING DAILY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2019 Tigercat 625E, 6144 hrs., Heat/AC, Webasto Preheater, blade, tires @ 80%. Firestone Special CRC 30.5l-32 on front, Nokian Forest King TR52 780-50-28.5 on rear, $229,500

35.5 tires, winch, dual arch

2014 Tigercat 620E, Woods Ready

2024 Tigercat 6900 -960 hours -Cat C-27 -On board air compressor -Full warranty still -Drag chains like new Using everyday!!!!

2017 Tigercat 234B, low hours, very good condition, $70,000 - Call Tom: 272-223-1324 or 570-889-3636

2015 Tigercat 234B, Runs very well, $47,000 - Call Tom: 272-223-1324 or 570-889-3636

Tigercat 234, with ground saw, woods ready, $48,000 - Call Tom: 272-223-1324 or 570-889-3636

2020 Tigercat 610E -2500 hours -Tight and dry -Winch -One new tire rest @ 80% -Joystick

430 hours on new engine. 34” tires, 5600 saw head.

2017 Tigercat dual arch skidder. Steering wheel control. EHS system has been converted to a standard hydrostat machine. Setup was completed by Tigercat dealer. Roughly 1200 hours on hydrostats and standard transmission. HD axles. 30.5 dual rims narrow offset. Deep rubber firestones. Ready to work. Equipment financing and delivery available.

CB radio, 3 shank ripper

2006 Timbco 425EXL with Logmax 7000 Processor Head, Hours are 8,000.00 Rebuilt Computer Measuring Device, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 85% No Leaks, Tight Machine. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 Timbco 425C Equipped with a CTR Dangle Head Saw with 24" Bar Saw, Rebuilt Engine with 3000 Hours, Undercarriage is 40-45%. Tracks are Good, New Drive Rollers, Enclosed Cab with Heat and AC, Ready for the Woods. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 425D with squirt boom and Waratah 620 processor. Will sell head separately

1994 Timbco 425B Processor, Machine has Log Max 5000 Head, 15,000 Hours, Undercarriage is 50%, 404 Chain Pitch, Enclosed Cab with Heat Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Timbco 425B 2005 Log Max processor head 22" capacity John Deere 6068 motor with 600 hours on it UC is good 9786 hours Runs and operates good