Equipment For Sale

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bogie dual arch grapple skidder

Tigercat 240B with Washer Saw Still under power and available for inspection.

2013 Tigercat 234 Loader

2018 Tigercat 250D -10,807 hours -Tight and dry -Turntable is tight -Tires and lights are good -Delimber Woods ready

2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.

2016 880 Tigercat log loader 16- square grapple. Hoe chuck grapple also available. New grapple has less than 2,000 hours and cost almost a hundred thousand dollars and works awesome! 8,200 hrs.

2020 Tigercat 724g -6115 hours -Tigercat 5600 head -Disk is in good shape -30.5 32 tires 75% tread -Tight and dry -Clean machine.

2018 Tigercat 720G -6789 hours -5600 head -Disk @50% -Tight and dry -Tires @50% -One owner

2021 Tigercat 630H -6047 hours -Brand new rear end -Still working in woods -Can provide service records -35.5 tires 2 Brand new tires on the rear -Blows cold air -DEF deleted

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 726B Feller Buncher, 9700 Hours, New Cummins 8.3 Remaned Engine with Low Hours, All Cylinders Repacked, Enclosed Cab with Heat, Tires are 30.5 x 32 Center Section is Good. Ready for the Woods Length 20 ft 0 in Width 9 ft 9 in Height 11 ft 0 in Weight 28,040 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Tigercat 234

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493

2019 TIGERCAT H822D Harvester – Processor 9,761Hours H822D -Model Serial Number- 82233488 New Motor 28" single grouser pads Tigercat 575 head, 3/4" bar Clean straight unit! Delivery is available at the buyer’s expense

2021 Tigercat 632H -2375 hours -Tight and dry -No screen damage -No oil leaks - 2 tires are new (44's) -Warranty's through -Drivetrain 9-30-24 -Structural 9-30-25 -Emissons 9-30-26 or 3000 hours Ready to work!!!!!!!