Equipment For Sale

2019 Morbark 50/48X -5,591 hours -Brand new wet clutch -New gearbox -New EGR Cooler -The drum has new knife holders, clamps, and bolts. -Comes with 5 sets of knives and 2 sets of counter knives Hours will rise as it is a working unit!!!!!!

2017 Morbark 6600 Horzontal Grinder with 7,600 hours, Cat C-32 Engine, 1050hp, 5th Wheel, Radio Remote, Magnetic Head Pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 1300 Tub Grinder, Cat C27 1050hp with 7,400 hours, Air Compressor, Loader, Magnetic head pulley. Weight 88,000 lbs Height 13' 6" Width 11' 11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Morbark Stac-Trac 1000 Track size: 30’, overall height: 9’ Drive: 15hp. good shape and maintained. Lots of spare parts included. SPECIFICATIONS 1000 Stac Trac Specifications Power 15-hp electric Track Speed 211 fpm Grapple Opening 1.375" – 18" Weight 4,700 lb Boom Swing 360 degrees Manpower Required one operator Standard Track 30' Lifting Capacity 1,480 lb

2012 Morbark 30/36 Chipper aka The Mountain Goat -4145 hours - C-18(500H.P) -Advantage 3 Drum -Grapple -Wireless remote -Grapple unit -Auto clutch -New belts -Serviced Regularly

CAT Platinum engine warranty until 6k or Feb 2026. C27 1050 HP, Remote working in woods – hours will go up.

Morbark Trailer Tipper Selling price $10,000

1996 Morbark 1200 -CAT motor approximately 3500 hours -Motor was replaced at 7000 hours -Engine runs great -Rollers and the Chain that turns the Tub need some work -Have the rollers for it Budget Grinder !!!!

2007 Morbark 40/36 Whole Tree Chipper, 600hp Deere with 8994 hours, A3 Drum, Light package, Remote, Rear stabilizers. Length 37'5" Height 12'4.25" Width 8'6" Weight 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Rebuilt 48" 6 Knife Horiz Feed, Top discharge in stock- set for 7/8" chip - price shown is with exchange

1995 MORBARK 280XP TREE CHIPPER JOHN DEERE 6081 ENGINE 16,000LB OPERATING WEIGHT 18 INCH 3 SETS OF KNIVES GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2014 Morbark 23 NCL Whole Tree Chipper -4472 hours -CAT C18 -NO DEF -Tight and dry unit -Ready to work

2010 MORBARK 40/36 DRUM CHIPPER 6135 DEERE 600HP ONE OWNER HOURS WILL GO UP STILL IN USE VERY WELL MAINTAINED

2010 MORBARK 40/36 DRUM CHIPPER 6135 DEERE 600HP ONE OWNER HOURS WILL GO UP STILL IN USE VERY WELL MAINTAINED JUST INSTALLED NEW DRUM 7/18/25 AT 7278 HOURS

2012 Morbark M18R Drum Chipper, 200 HP John Deere with 4,900 hours, Hydraulic front jack and discharge chute, 5000lb winch, Manual rear outriggers. Gross weight: 11,000 lbs Length:21 ft 2 in Width:7 ft 7 in for single or tandem axle, 8 ft 5 in for single axle dual wheel Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

The complete Morbark debarker setup offered includes essential components for efficient log processing. It features log troughs that are fully hydraulic, with dimensions of 54" x 25' and ladderback chain. The hydraulic drive, along with a feed roll head, ensures smooth operation. The outfeed log trough is also fully hydraulic, complemented by a 26' hydraulic barn sweep equipped with 12" paddles for effective material handling. A Choremaster hydraulic barn sweep and a substantial 36" x 32" x 33" hydraulic tank with a pump are included for robust support. An 80" x 10' x 82" cab, accessible via steps, offers protection and visibility for operators. Critical to its operation is the 60 series Detroit diesel engine with 16,758 hours logged, providing reliable power. A 275-gallon fuel tank is included, although it may have a small leak that should be addressed. This used debarking setup is suitable for forestry and sawmill operations requiring dependable machinery to handle large-scale debarking tasks efficiently. For any inquiries or further details, interested buyers may use the alternate contact number provided, 607-438-7948.

1998 Morbark Mountain Goat 30/36,Whole Tree Chipper, has a Caterpillar 575 HP, 325 Undercarriage Which is 80-85%, Enclosed Cab with Heat and AC, New Updated Drum with 1.000 Hours, Morlift 250. Loader, Rebuilt Pumps, New Hydraulic Pump, Hydraulic Oil Cooler and Fan, Ready for the Woods. Length 31' 6" Height 12' 5.5" Width 8' 5.25", weight 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.