Equipment For Sale

CASTLE TSM-21 Pocket Hole Boring Machine;Single hole routing system for use with material from 1/2" - 3/4" thickness; -- CASTLE'S "A-Frame" motor carriage engineered to first route a pocket and then drill hole from the other direction. -- Equipped with: 1.5 HP Porter Cable router w/standard "4-flute" router bit for pocket routing and Porter Cable #7301 drill for pilot hole drilling with 9/64" brad point drill bit; foot pedal actuated cycle, will cycle as quickly as (2) cycles/sec. -- The large 2" dia. holddown cylinder firmly clamps material and the low 6" boring angle minimizes shifting, reduces screw breakout and splitting.The TSM-21 is an improved version on the TSM-20. It features a more accurate carriage design, magnetic switches, and solit state electronics.

CAT transmission rebuild at 7,100 hours 35.5 Tires, 19’ grapple

2012 Caterpillar 545C Grapple Skidder, Machine has 11,500 Hours, Tires are 35" with Ring Chains all around, Enclosed Cab with Heat and Air Conditioning, Steering Wheel, No Joystick Controls, Ready for the Woods. Operating Weight 42,325lb Overall Length 26.34ft in. Overall Width 11.15ft in. Height To Top Of Cab 10.45ft in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

7.0 CUBIC FOOT CAPACITY BHL LOADER LINKAGE CATERPILLAR BHL 24" HEAVY DUTY ROCK BUCKET PINS INCLUDED SOLD AS IS

7.0 CUBIC FOOT CAPACITY BUCKET PINS INCLUDED CATERPILLAR 24" HEAVY DUTY ROCK BUCKET INCLUDES 5 TOOTH TIPS SOLD AS IS

13.0 CFT CAPACITY CATERPILLAR BHL 48" DC BUCKET CATERPILLAR PART NUMBER 212-8738 INCLUDES WATER HOLES PINS INCLUDED SOLD AS IS

48" TINES 60" CARRIAGE CATERPILLAR BACKHOE LOADER FORKS PIN ON LUGGING SOLD AS IS TINES- 2" THICK 5" WIDE

16.7 CUBIC FOOT CAPACITY CATERPILLAR 60" DITCH CLEANING BUCKET CATERPILLAR PART NUMBER 212-8741 DOES NOT INCLUDE BUCKET PINS INCLUDES DRAIN HOLES SOLD AS IS WELD ON CUTTING EDGE

1.5 CUBIC YARD CAPACITY CATERPILLAR 95" GENERAL PURPOSE BUCKET CATERPILLAR PART NUMBER 337-7401 DOES NOT INCLUDE BOLT ON CUTTING EDGE FOR USE WITH CATERPILLAR 420-430 BACKHOE LOADER PIN ON LINKAGE SOLD AS IS

4.2 CUBIC FOOT CAPACITY CATERPILLAR 18" HD BUCKET FITS CATERPILLAR BACKHOES 415-440 PINS NOT INCLUDED SOLD AS IS

BUCKET-GP, 1.5 YD3 FOR USE WITH: 420F/F2, 430F/F2 ST, NEXT GEN 420, 420XE, 430 Online Owner's Manual PIN ON width 2406mm (95"), base edge

337-7401 BUCKET-GP, 1.5 YD3, PO FOR USE WITH: 420F/F2, 430F/F2 ST, NEXT GEN 420, 420XE, 430 Online Owner's Manual width 2406mm (95"), base edge

7 CUBIC FOOT CAPACITY CATERPILLAR 24" HEAVY DUTY ROCK BUCKET CATERPILLAR PART NUMBER 219-3396 INCLUDED BUCKET PINS SOLD AS IS

CA boom & Arch from a Cat 545 Skidder. Great condition, minimal if any wear in weldments. Can be sold separately.

.60 CYD CAPACITY B LINKAGE CATERPILLAR 24" SEVERE DUTY BUCKET MISSING 1 PIN SOLD AS IS

1.18 CUBIC YARD CAPACITY BUCKET PINS INCLUDED CATERPILLAR 60" TILT DITCHING BUCKET CATERPILLAR PART NUMBER 511-5334 INCLUDES BOLT ON CUTTING EDGE PART NUMBER 442-5329 INCLUDES CONNECTING LINES INCLUDES: BACK GRADING EDGE SOLD AS IS

1 YD BUCKET BOLT ON CUTTING EDGE BOLT ON CUTTING EDGE NOT INCLUDED GENERAL PURPOSE SOLD AS IS

1.25 YD GP BKT BOLT ON CUTTING EDGE FITS 420F/430F INCLUDES CUTTING EDGE PIN ON SOLD AS IS

BUCKET-ROCK, HD, 18", 4.6 FT3. FITS 415-444 BHL Online Owner's Manual